Status LED on every ATOM device (except the vehicle beacons)

common/status_led_atom.yaml puts common/status_led.yaml on the ATOM Lite's
own RGB LED (G27, 64 RMT symbols to leave room for IR/RF). echo-1 uses its
existing LED light.

common/status_led_atom.yaml

@@ -0,0 +1,18 @@
+---
+# Status LED on the M5Stack ATOM Lite's own RGB LED (G27), see common/status_led.yaml
+packages:
+  status_led: !include
+    file: status_led.yaml
+    vars:
+      light_id: atom_led
+
+light:
+  - platform: esp32_rmt_led_strip
+    id: atom_led
+    internal: true
+    pin: 27
+    num_leds: 1
+    rmt_symbols: 64  # 1 LED is 24 bits; leave RMT memory for remote_transmitter/receiver
+    chipset: ws2812
+    channel_colors: GRB
+    restore_mode: ALWAYS_OFF

mcu-echo-1.yaml

@@ -5,7 +5,7 @@
 #   GPIO22                             -> speaker_id (speaker i2s_audio i2s_dout_pin)
 #   GPIO23                             -> echo_microphone (microphone i2s_audio i2s_din_pin)
 #   GPIO26  Grove SDA
-#   GPIO27                             -> LED (light esp32_rmt_led_strip)
+#   GPIO27  ATOM RGB LED               -> LED [neo_buildin] (light esp32_rmt_led_strip), also status
 #   GPIO32  Grove SCL
 #   GPIO33                             -> speaker_bus (i2s_audio i2s_lrclk_pin)
 #   GPIO39                             -> Button (binary_sensor gpio) (inverted)
@@ -30,6 +30,10 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include
+    file: common/status_led.yaml
+    vars:
+      light_id: neo_buildin
 
 external_components:
   # speaker media player: skip a failed playlist item (esphome#19862), drop once merged

mcu-fireplace.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  RS485 Tx
 #   GPIO25  I2C1 SDA - red             -> i2c (i2c sda)
 #   GPIO26  I2C0 SDA - white
-#   GPIO27  NEO 1x
+#   GPIO27  NEO 1x                     -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL
 #   GPIO33  RS485 Rx
 #   GPIO39  BUTTON                     -> Status Button (binary_sensor gpio)
@@ -46,6 +46,7 @@ external_components:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 
 i2c:

mcu-gate.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  RS485 TX
 #   GPIO25  I2C1 SDA red
 #   GPIO26  I2C0 SDA white
-#   GPIO27  NEO
+#   GPIO27  NEO                        -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL                   -> gate_ogi_state (binary_sensor gpio) (inverted); gate_ogi_blink (binary_sensor gpio) (inverted)
 #   GPIO33  RS485 RX
 #   GPIO39  BUTTON
@@ -35,6 +35,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 button:
   - platform: output

mcu-heater.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  UART1 RX                   -> uart_modbus (uart rx_pin)
 #   GPIO25  I2C1 SDA                   -> i2c (i2c sda)
 #   GPIO26  I2C0 SDA
-#   GPIO27  NEO
+#   GPIO27  NEO                        -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL
 #   GPIO33  UART1 TX                   -> uart_modbus (uart tx_pin)
 #   GPIO39  BUTTON
@@ -56,6 +56,7 @@ external_components:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 #logger:
 #  level: VERBOSE

mcu-kitchen.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  RS485 Tx
 #   GPIO25  I2C1 SDA - red             -> i2c (i2c sda)
 #   GPIO26  I2C0 SDA - white
-#   GPIO27  NEO 1x
+#   GPIO27  NEO 1x                     -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL
 #   GPIO33  RS485 Rx
 #   GPIO39  BUTTON                     -> Status Button (binary_sensor gpio)
@@ -54,6 +54,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 api:
   reboot_timeout: 300s

mcu-mains-power.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  UART1 RX
 #   GPIO25  I2C1 SDA
 #   GPIO26  I2C0 SDA                   -> uart_modbus (uart rx_pin)
-#   GPIO27  NEO
+#   GPIO27  NEO                        -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL                   -> uart_modbus (uart tx_pin)
 #   GPIO33  UART1 TX
 #   GPIO39  BUTTON
@@ -42,6 +42,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 modbus:
   uart_id: uart_modbus

mcu-patio.yaml

@@ -10,7 +10,7 @@
 #   GPIO23  RS485 Tx
 #   GPIO25  I2C1 SDA - red             -> i2c (i2c sda)
 #   GPIO26  I2C0 SDA - white
-#   GPIO27  NEO 1x
+#   GPIO27  NEO 1x                     -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  I2C0 SCL
 #   GPIO33  RS485 Rx
 #   GPIO39  BUTTON                     -> Status Button (binary_sensor gpio)
@@ -55,6 +55,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 
 i2c:

mcu-rf.yaml

@@ -7,6 +7,7 @@
 #   GPIO23                             -> spi (spi clk_pin)
 #   GPIO25                             -> rf_rx (remote_receiver)
 #   GPIO26  Grove SDA
+#   GPIO27  NEO (ATOM RGB LED)         -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  Grove SCL
 #   GPIO33                             -> cc1101 (cc1101 cs_pin)
 substitutions:
@@ -30,6 +31,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 spi:
   clk_pin: 23

mcu-shed.yaml

@@ -6,6 +6,7 @@
 #   GPIO22                             -> Garden Light (switch gpio)
 #   GPIO25                             -> i2c (i2c sda)
 #   GPIO26  Grove SDA
+#   GPIO27  NEO (ATOM RGB LED)         -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  Grove SCL
 # I2C:
 #   0x27  pca9554_module (pca9554)
@@ -32,6 +33,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 i2c:
   sda: 25

mcu-well.yaml

@@ -5,6 +5,7 @@
 #   GPIO23                             -> modbus_uart (uart tx_pin)
 #   GPIO25                             -> i2c (i2c sda)
 #   GPIO26  Grove SDA
+#   GPIO27  NEO (ATOM RGB LED)         -> atom_led (status LED, common/status_led_atom.yaml)
 #   GPIO32  Grove SCL
 #   GPIO33                             -> modbus_uart (uart rx_pin)
 # I2C:
@@ -45,6 +46,7 @@ esp32:
 packages:
   common: !include common/common.yaml
   ipv6_only: !include common/ipv6_only.yaml
+  status_led: !include common/status_led_atom.yaml
 
 api:
   actions: