have fun

mcu-irrigation-1.yaml

@@ -0,0 +1,225 @@
+substitutions:
+  device: irrigation-1
+  name: Irrigation A
+  comment: "OBSOLETE | Outside, Well: Irrigation system"
+
+esphome:
+  name: mcu-${device}
+  comment: ${comment}
+  platform: ESP8266
+  board: esp01_1m
+  # on_boot:
+  #   priority: -10
+  #   then:
+  #     - switch.turn_off: relay_1
+  #     - delay: 2s
+  #     - switch.turn_off: relay_2
+  #     - delay: 2s
+  #     - switch.turn_off: relay_3
+  #     - delay: 2s
+  #     - switch.turn_off: relay_4
+  #     - delay: 2s
+  #     - switch.turn_off: relay_5
+
+packages:
+  common: !include common/common.yaml
+  
+# api:
+#   services:
+#     - service: program_morning
+#       then:
+#         - switch.turn_on: relay_1
+#         - delay: 10minutes
+#         - switch.turn_off: relay_1
+#         - delay: 1minutes
+#         - switch.turn_on: relay_2
+#         - delay: 10minutes
+#         - switch.turn_off: relay_2
+#         - delay: 1minutes
+#         - switch.turn_on: relay_3
+#         - delay: 5minutes
+#         # - switch.turn_on: relay_4
+#         # - delay: 40minutes
+#         - switch.turn_off: relay_3
+#         - delay: 1minutes
+#         - switch.turn_on: relay_1
+#         - delay: 10minutes
+#         - switch.turn_off: relay_1
+#         - delay: 1minutes
+#         - switch.turn_on: relay_2
+#         - delay: 10minutes
+#         - switch.turn_off: relay_2
+#         - delay: 1minutes
+#         - switch.turn_on: relay_3
+#         - delay: 5minutes
+#         # - switch.turn_on: relay_4
+#         # - delay: 40minutes
+#         - switch.turn_off: relay_3
+#     - service: program_grass
+#       then:
+#         - switch.turn_on: relay_1
+#         - delay: 5minutes
+#         - switch.turn_off: relay_1
+#         - delay: 1minutes
+#         - switch.turn_on: relay_2
+#         - delay: 5minutes
+#         - switch.turn_off: relay_2
+#     - service: patio
+#       then:
+#         - switch.turn_on: relay_5
+#         - delay: 30sec
+#         - switch.turn_off: relay_5
+
+i2c:
+  sda: 3
+  scl: 1
+  scan: true #false
+
+# mcp23017:
+#   - id: 'mcp23017_hub'
+#     address: 0x20
+
+pcf8574:
+  - id: 'relay_module'
+    address: 0x20
+    pcf8575: false
+
+# SONOFF 4ch Pro! Not R2!
+# GPIO_KEY1,        // GPIO00 Button 1
+# GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
+# GPIO_USER,        // GPIO02 Optional sensor
+# GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
+# GPIO_REL3,        // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
+# GPIO_REL2,        // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
+#                   // GPIO06 (SD_CLK   Flash)
+#                   // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
+#                   // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
+# GPIO_KEY2,        // GPIO09 Button 2
+# GPIO_KEY3,        // GPIO10 Button 3
+#                   // GPIO11 (SD_CMD   Flash)
+# GPIO_REL1,        // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
+# GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status
+# GPIO_KEY4,        // GPIO14 Button 4
+# GPIO_REL4,        // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
+
+# binary_sensor:
+  # - platform: gpio
+  #   pin:
+  #     number: GPIO0
+  #     mode: INPUT_PULLUP
+  #     inverted: True
+  #   name: "Irrigation Button A1"
+  #   id: button_1
+  #   on_press:
+  #     - switch.toggle: relay_1
+  # - platform: gpio
+  #   pin:
+  #     number: GPIO9
+  #     mode: INPUT_PULLUP
+  #     inverted: True
+  #   name: "Irrigation Button A2"
+  #   id: button_2
+  #   on_press:
+  #     - switch.toggle: relay_2
+  # - platform: gpio
+  #   pin:
+  #     number: GPIO10
+  #     mode: INPUT_PULLUP
+  #     inverted: True
+  #   name: "Irrigation Button A3"
+  #   id: button_3
+  #   on_press:
+  #     - switch.toggle: relay_3
+  # - platform: gpio
+  #   pin:
+  #     number: GPIO14
+  #     mode: INPUT_PULLUP
+  #     inverted: True
+  #   name: "Irrigation Button A4"
+  #   id: button_4
+  #   on_press:
+  #     - switch.toggle: relay_4
+
+# sensor:
+  # - platform: dht
+  #   pin: GPIO2
+  #   temperature:
+  #     name: "Well Shaft Temperature"
+  #     id: 'well_temperature'
+  #   humidity:
+  #     name: "Well Shaft Humidity"
+  #     id: 'well_humidity'
+  #   model: 'DHT22'
+  #   update_interval: 60s
+
+# switch:
+#   - platform: gpio
+#     name: "Irrigation Valve A1"
+#     pin: GPIO12
+#     id: relay_1
+#     interlock: &interlock_group [relay_1, relay_2, relay_3, relay_4, relay_5, relay_6, relay_7, relay_8]
+#   - platform: gpio
+#     name: "Irrigation Valve A2"
+#     pin: GPIO5
+#     id: relay_2
+#     interlock: *interlock_group
+#   - platform: gpio
+#     name: "Irrigation Valve A3"
+#     pin: GPIO4
+#     id: relay_3
+#     interlock: *interlock_group
+#   - platform: gpio
+#     name: "Irrigation Valve A4"
+#     pin: GPIO15
+#     id: relay_4
+#     interlock: *interlock_group
+#   - platform: gpio
+#     name: "Irrigation Valve A5"
+#     id: relay_5
+#     interlock: *interlock_group
+#     pin:
+#       pcf8574: relay_module
+#       number: 0
+#       mode: OUTPUT
+#       inverted: true
+#   - platform: gpio
+#     name: "Irrigation Valve A6"
+#     id: relay_6
+#     interlock: *interlock_group
+#     pin:
+#       pcf8574: relay_module
+#       number: 1
+#       mode: OUTPUT
+#       inverted: true
+#   - platform: gpio
+#     name: "Irrigation Valve A7"
+#     id: relay_7
+#     interlock: *interlock_group
+#     pin:
+#       pcf8574: relay_module
+#       number: 2
+#       mode: OUTPUT
+#       inverted: true
+#   - platform: gpio
+#     name: "Irrigation Valve A8"
+#     id: relay_8
+#     interlock: *interlock_group
+#     pin:
+#       pcf8574: relay_module
+#       number: 3
+#       mode: OUTPUT
+#       inverted: true
+      
+# output:
+#   - platform: esp8266_pwm
+#     id: led_blue
+#     pin: GPIO13
+#     inverted: True
+
+# light:
+#   - platform: monochromatic
+#     name: "Irrigation A Blue LED"
+#     output: led_blue
+
+time:
+  - !include common/time/homeassistant.yaml