Split the WiFi part off common/ipv6_only.yaml into common/ipv6_only_eth.yaml
and use it on mcu-gateway. The #19750 component list needs ethernet,
otherwise the stock component still runs DHCPv4. mdns from the fork also
carries the IPv6 fix for ETH-only builds (espressif/esp-protocols#1161).
allow_plaintext_upload lets the uploader give a device that doesn't encrypt
yet its one migration install. Remove it together with the password once
every device has been updated (the uploader says so).
Values come from ESPHome's own hint in the log of each online device
("Set flash_chip: ... to save IRAM"). Devices that were off got the value of
an identical board (ESP32-PICO-D4 ATOM/Stamp Pico: gd, JC3248W535: generic,
POW Elite: gd), marked as not read from the device.
- actions/checkout@v7 and tj-actions/changed-files@v47 (Node 20 is deprecated)
- PIP_BREAK_SYSTEM_PACKAGES for Gitea's runner image (externally-managed Python)
- untrack common/.esphome (a gitlink with no submodule mapping) and ignore
.esphome/ in every directory
common/status_led_atom.yaml puts common/status_led.yaml on the ATOM Lite's
own RGB LED (G27, 64 RMT symbols to leave room for IR/RF). echo-1 uses its
existing LED light.
Red blink without network, orange without an API client, purple on a
component error, blue blink during OTA, green when things are back to
normal, then the light returns to its previous state.
echo uses it on the gateway LED ring; drop its status_led on GPIO23,
which never worked because the ledc output owns that pin.
common/nspanel_popup.yaml shows a popupNotify page during OTA (written straight
to the display uart, since OTA blocks the loop that sends the component's
queued commands) and a device info popup (version, build time, IPs) from the
Info button on the new last card or the show_info API action. The OTA gets
id ota_esphome to extend it. Also documents the NSPanel pinout.
- common/wifi.yaml: the network gets id wifi_iot, so devices can
override it with '!extend wifi_iot'
- common/ipv6_only.yaml: add-on package next to any common package;
switches to the IPv6-only SSID, wifi ipv6_only (SLAAC, no DHCPv4,
esphome/esphome#19750 as external component until merged) and
min_ipv6_addr_count: 1
- mcu-lvgl-trainer, mcu-nspanel-dev, mcu-rfid-reader, mcu-stackchan,
mcu-tft moved to the IPv6-only network
Move the homeassistant time platform (id ha_time) into all common
packages. Devices with custom triggers now use '!extend ha_time';
plain duplicate time blocks are removed. mcu-lvgl's unused time_comp
is unified to ha_time.
Extract shared M5ATOM vehicle code (esp32, on_loop, LED effects) into
common/vehicle_base.yaml, reducing each vehicle file from ~136 to 20
lines. Remove dead commented-out code from on_loop lambda.
Gate: fix on_multi_click and select indentation, change
esp32_ble_tracker id from ${name} to ${device} (lowercase),
remove unused commented-out gate_flash GPIO sensor.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
randy
