Voice assistant satellite with animated face on the CoreS3 display:
- power rails, IO expander resets and servo power as in the M5 BSP
- mic and speaker share one I2S bus, so the mic is released before playback
- AW88298 volume limited to the audible range (0.5-1.0)
- partial display redraws, status screen until Home Assistant connects
- battery and wifi indicators, listening icon
- camera converted to JPEG on demand, no periodic frames
Switch all NSPanels from the MQTT + AppDaemon based
esphome-nspanel-lovelace-ui to the native component
(randybb/esphome-nspanel-lovelace-native, ref: devices).
Cards and screensaver are now configured directly in ESPHome,
removing the dependency on MQTT and AppDaemon.
qspi_dbi is deprecated in favor of mipi_spi. Also fixes
mcu-lvgl-trainer's LVGL rotation (must be set on the lvgl component,
not the display, when LVGL is in use) and its deprecated
publish_initial_state -> trigger_on_initial_state. brightness is
dropped since mipi_spi only supports it for AMOLED panels and both
devices already control backlight separately.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the esp32_rmt_led_strip platform's rgb_order option to
channel_colors; update the remaining devices using it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The i2s_audio media_player platform was removed; rebuild the audio
pipeline like mcu-echo.yaml with an i2s_audio speaker feeding a
mixer, so media playback, TTS announcements, and rtttl beeps all
share the one physical DAC output without conflicting. Also uses
format: NONE instead of the deprecated codec_support_enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The single on_multi_click FSM mixed an unbounded "at least 1500ms"
pattern with two bounded blink patterns, which made Open detection
unreliable. Split into two binary_sensor entries sharing the same
pin: a filter-based one for steady Open/Closed, and a dedicated
on_multi_click for the Opening/Closing blink patterns.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
register_count is derived from value_type now; drop the now-redundant
register_count: 1 on the temp/humidity sensors, and replace the
Solar Pressure sensor's register_count: 2 (its device always returns
2 registers per read) with a hidden padding sensor on the next
register using reuse_previous_range: true, per the new
modbus_controller range-grouping mechanism.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ili9xxx is being phased out in favor of the unified mipi_spi driver;
model TFT 2.4 maps to the ILI9341 chip it was already using.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a UART-based Modbus link plus scripts to toggle channel 1 on the
n4dig08 relay module, and calls relay_module.setup() before each
irrigation switch action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Move rx/tx off the shared gdo0 pin (21) onto dedicated pins, drop the
now-unneeded allow_other_uses/gdo0_pin workarounds, and align tx/rx
frequency to 433.92MHz.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reflects what the device actually controls; renames the entity/id
(blower_auto -> aerator_auto) and display names accordingly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the esp32_rmt_led_strip platform's rgb_order option to
channel_colors; update all devices using it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the api component's services/service keys to
actions/action; update all devices using the old names.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
It's generated/local state from ESPHome Device Builder that changes
constantly and doesn't belong in version control.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
randy
ESPHome Device Builder