Install yamllint with pip instead of ibiqlik/action-yamllint, which expects
it preinstalled like on GitHub's runner, and pip install with
--ignore-installed so pip doesn't try to remove Debian's packages.
allow_plaintext_upload lets the uploader give a device that doesn't encrypt
yet its one migration install. Remove it together with the password once
every device has been updated (the uploader says so).
Values come from ESPHome's own hint in the log of each online device
("Set flash_chip: ... to save IRAM"). Devices that were off got the value of
an identical board (ESP32-PICO-D4 ATOM/Stamp Pico: gd, JC3248W535: generic,
POW Elite: gd), marked as not read from the device.
- actions/checkout@v7 and tj-actions/changed-files@v47 (Node 20 is deprecated)
- PIP_BREAK_SYSTEM_PACKAGES for Gitea's runner image (externally-managed Python)
- untrack common/.esphome (a gitlink with no submodule mapping) and ignore
.esphome/ in every directory
common/status_led_atom.yaml puts common/status_led.yaml on the ATOM Lite's
own RGB LED (G27, 64 RMT symbols to leave room for IR/RF). echo-1 uses its
existing LED light.
Red blink without network, orange without an API client, purple on a
component error, blue blink during OTA, green when things are back to
normal, then the light returns to its previous state.
echo uses it on the gateway LED ring; drop its status_led on GPIO23,
which never worked because the ledc output owns that pin.
common/nspanel_popup.yaml shows a popupNotify page during OTA (written straight
to the display uart, since OTA blocks the loop that sends the component's
queued commands) and a device info popup (version, build time, IPs) from the
Info button on the new last card or the show_info API action. The OTA gets
id ota_esphome to extend it. Also documents the NSPanel pinout.
- mipi_rgb GUITION-4848S040 model, ST7701S init over SPI (48/47)
- GT911 touch mirrored like the image, backlight on GPIO38
- clock and status pages (status until Home Assistant connects),
same navigation bar as the other LVGL displays
- IPv6-only network
mcu-lvgl (CYD 4.3"):
- normalized: rpi_dpi_rgb -> mipi_rgb (ESP32-8048S050 pins/timing, pclk
12.5 MHz), GT911 touch added, platformio_options and default CPU
frequency dropped, demo meters and duplicate uptime sensors removed
- pages: clock, status (logo, WiFi, IPv6 first, HA, version, uptime);
status page shown until Home Assistant connects
- same navigation bar and theme as mcu-lvgl-trainer
mcu-lvgl-trainer:
- status lines colored like on the other displays (connected green,
waiting orange, details gray), stacked in a flex column
- stopwatch format warning fixed
Same boot screen as on the other displays: "Made for ESPHome" logo,
name, WiFi with signal, IPv6 addresses first (link-local skipped),
Home Assistant state, ESPHome version and uptime.
- common/wifi.yaml: the network gets id wifi_iot, so devices can
override it with '!extend wifi_iot'
- common/ipv6_only.yaml: add-on package next to any common package;
switches to the IPv6-only SSID, wifi ipv6_only (SLAAC, no DHCPv4,
esphome/esphome#19750 as external component until merged) and
min_ipv6_addr_count: 1
- mcu-lvgl-trainer, mcu-nspanel-dev, mcu-rfid-reader, mcu-stackchan,
mcu-tft moved to the IPv6-only network
Inactive display dim follows the sun (5 % by day, off after dusk at
-6 degrees) and stays at 5 % while light.office_j_lights is on.
Re-applied on time sync, at dawn/dusk and when the lights change.
- touch: drop calibration/transform, the driver defaults to the native
320x480 panel and LVGL rotates touch points itself (taps were rotated
by 90 degrees)
- pages: clock (default), basement lights with brightness and color
temperature for the exercise room (sliders hidden while it is off),
training start/stop, fan off/50-100 %, stopwatch, status screen with
"Made for ESPHome" logo and IPv6 first
- light attributes read as text, 'None' while off is skipped
- unused fonts, colors and leftovers removed; ext_uart kept for a
future ANT+ bridge
- status screen logo replaced by the official "Made for ESPHome" badge,
the plain ESPHome logo is not meant for third-party devices
- status screen shows one global IPv6 and one IPv4 address (link-local
skipped) instead of the IPv4 sensor value
randy