randy
9eb5cd9155
OpenPrintTag reader: send the tag record to Home Assistant
...
esphome.openprinttag event with the uid and the raw record (empty when
the tag is removed) for the OpenPrintTag integration
(randybb/ha-openprinttag).
2026-10-03 13:20:40 +02:00
randy
b8f8649833
OpenPrintTag reader: M5Stamp S3 with a PN5180
...
Filament spool tags to Home Assistant through the pn5180 component of
randybb/esphome-components, the color also as a light. Onboard LED for
tag feedback and status until the external LED is fitted, buzzer on
GPIO4.
2026-10-03 12:48:56 +02:00
randy
5fdea643a7
rfid-reader: use a valid RTTTL default duration (d=32)
...
ESPHome only accepts d=1/2/4/8/16/32 now; d=24 was rejected and the
success/write tones never played.
2026-10-03 10:51:23 +02:00
randy
4bbf26fc87
Update comment about upstream mdns component
CI / YAML lint (push) Failing after 17s
CI / ESPHome config validation (push) Successful in 1m0s
2026-10-02 17:46:59 +02:00
randy
427e9ac136
IPv6-only for the Ethernet gateway
...
Split the WiFi part off common/ipv6_only.yaml into common/ipv6_only_eth.yaml
and use it on mcu-gateway. The #19750 component list needs ethernet,
otherwise the stock component still runs DHCPv4. mdns from the fork also
carries the IPv6 fix for ETH-only builds (espressif/esp-protocols#1161 ).
2026-10-01 23:49:02 +02:00
randy
005c9903bf
Disable api reboot timeout for kitchen lights due flaky wifi (thanks ubiquiti!)
CI / YAML lint (push) Failing after 17s
CI / ESPHome config validation (push) Successful in 51s
2026-10-01 12:37:09 +02:00
randy
db57574497
Fix crashing, display cs and fonts for cnc pendant
CI / YAML lint (push) Failing after 18s
CI / ESPHome config validation (push) Successful in 49s
2026-10-01 01:38:21 +02:00
randy
fd7a4c98b5
Add initial mcu-cnc-pendant configuration
2026-10-01 00:50:41 +02:00
randy
2e8b678072
nrf-ant, nrf-dk: two-way UART on the DK default pins, wires crossed
...
Both boards use UART1 RX P1.01 / TX P1.02 so Home Assistant data can reach
the ANT+ node's transmitters; on the default pins the ANT+ node no longer
needs the RX pin workaround.
2026-09-30 23:15:10 +02:00
randy
3f9a8c3117
nrf-ant: Garmin HRM-Dual, HRM-Tri, Rally RS200, Speed Sensor 2, SRAM Force AXS
...
CI / YAML lint (push) Successful in 8s
CI / ESPHome config validation (push) Successful in 50s
Also sets the unused UART1 RX to P1.02: without it the fork keeps the DK's
default RX pin, P1.01, and the UART hears its own transmissions.
2026-09-30 22:13:33 +02:00
randy
38ede7fab6
nrf-ant: Garmin HRM-Pro, Concept2 PM5, Garmin Tempe, Garmin Varia RTL515, status LEDs
...
LED 1 lights while a configured ANT+ device is received, LED 2 while an
unconfigured one is in range; everything is forwarded to mcu-nrf-dk.
2026-09-30 21:55:04 +02:00
randy
ad9aeea346
nrf-dk: Thread MTD, frees 52 KB of the MCUboot slot (98 % -> 87 %)
2026-09-30 21:34:17 +02:00
randy
3a397cfb4b
ANT+ via ESPHome: mcu-nrf-ant (RadiANT) sends heart rate to mcu-nrf-dk over packet_transport
...
Replaces the E73 running the archived nrf-ant-bridge firmware and drops
mcu-ant-host, which read that bridge's line protocol.
2026-09-30 21:17:20 +02:00
randy
6fd5ee1fa7
Add ant-host: host ESPHome reading an ANT+ bridge over serial
2026-09-30 20:07:57 +02:00
randy
eb25302e9b
nrf-dk: Thread, buttons, LEDs and ANT+ heart rate from the E73 bridge
2026-09-30 20:07:57 +02:00
randy
34929a38c7
CI: skip zephyr: configs, they need the esphomeplatformzephyr fork
2026-09-30 20:07:57 +02:00
randy
0536e91fd1
CI: work on Gitea's runner image too
...
CI / YAML lint (push) Successful in 5s
CI / ESPHome config validation (push) Successful in 10s
Install yamllint with pip instead of ibiqlik/action-yamllint, which expects
it preinstalled like on GitHub's runner, and pip install with
--ignore-installed so pip doesn't try to remove Debian's packages.
2026-09-30 14:50:33 +02:00
randy
7374ddf4d6
Drop the speaker override, esphome#19862 is merged
CI / YAML lint (push) Failing after 32s
CI / ESPHome config validation (push) Failing after 37s
2026-09-30 12:35:53 +02:00
randy
a005b940b2
rfid-reader: take the NDEF records by reference
...
get_records() now returns a StaticVector of unique_ptr, which can't be copied.
2026-09-30 12:15:49 +02:00
randy
46cf3b1fe8
OTA: require encryption with the api key, plaintext + password only for migration
...
allow_plaintext_upload lets the uploader give a device that doesn't encrypt
yet its one migration install. Remove it together with the password once
every device has been updated (the uploader says so).
2026-09-30 12:05:39 +02:00
randy
bb76912023
Set framework.advanced.flash_chip on ESP32 devices to save IRAM
...
Values come from ESPHome's own hint in the log of each online device
("Set flash_chip: ... to save IRAM"). Devices that were off got the value of
an identical board (ESP32-PICO-D4 ATOM/Stamp Pico: gd, JC3248W535: generic,
POW Elite: gd), marked as not read from the device.
2026-09-30 11:57:30 +02:00
randy
831d88689d
CI: Node 24 actions, pip on PEP 668 runner images, drop committed build cache
...
- actions/checkout@v7 and tj-actions/changed-files@v47 (Node 20 is deprecated)
- PIP_BREAK_SYSTEM_PACKAGES for Gitea's runner image (externally-managed Python)
- untrack common/.esphome (a gitlink with no submodule mapping) and ignore
.esphome/ in every directory
2026-09-30 11:21:55 +02:00
randy
170fd69274
Fix yamllint errors: trailing spaces, blank lines and newline at end of file
...
Allow aligned values after a colon (the bedroom lamp presets).
2026-09-30 11:08:22 +02:00
randy
89763817f6
bedroom lamps: use the xiaomi_bslamp2 fork with the ESPHome 2026.10 light fix
2026-09-30 10:53:16 +02:00
randy
03ca4e98b5
status_led: show component errors only on a dedicated status LED (show_errors)
...
The ATOM LED gets them; displays and lights that are also normal lights don't,
so a failed component can't take them over.
2026-09-30 10:12:06 +02:00
randy
fb66547dd1
status_led: don't show component errors, only network, API and OTA
2026-09-30 09:00:58 +02:00
randy
725c400de6
atoms3: full-screen status, IPv6-only, animation as image platform, fix colours
...
The status (common/status_led.yaml) drives a virtual RGB light that fills
the display; the display needs little-endian RGB565 (colours were swapped).
2026-09-30 08:58:16 +02:00
randy
7517c301ac
Status LED on every ATOM device (except the vehicle beacons)
...
common/status_led_atom.yaml puts common/status_led.yaml on the ATOM Lite's
own RGB LED (G27, 64 RMT symbols to leave room for IR/RF). echo-1 uses its
existing LED light.
2026-09-30 08:58:16 +02:00
randy
422b334582
air-office-r: LEDs back on (the stick had lost its GND), status on the NEO stick
2026-09-30 08:29:19 +02:00
randy
2f5e438424
Move remaining NSPanel's to IPv6 Only network
2026-09-30 08:08:12 +02:00
randy
6a3002d9b7
Add status_led package: network, API, error and OTA status on a visible RGB light
...
CI / ESPHome config validation (push) Failing after 7s
CI / YAML lint (push) Failing after 37s
Red blink without network, orange without an API client, purple on a
component error, blue blink during OTA, green when things are back to
normal, then the light returns to its previous state.
echo uses it on the gateway LED ring; drop its status_led on GPIO23,
which never worked because the ledc output owns that pin.
2026-09-29 23:33:50 +02:00
randy
6845679bc0
echo: only the gateway LED ring is visible, the ATOM LED is inside
2026-09-29 23:24:39 +02:00
randy
a3950d9f17
echo: it's a Xiaomi Mijia Gateway with an ATOM Echo brain transplant
2026-09-29 23:23:44 +02:00
randy
0d6aa6e3d7
nspanel-patio: jump straight to the Von card
...
Temporarily make it the default page and render it once, instead of
rendering home, next and next.
2026-09-29 23:23:14 +02:00
randy
271a5a5a54
nspanel: popups for OTA progress and device info, Info card on every panel
...
common/nspanel_popup.yaml shows a popupNotify page during OTA (written straight
to the display uart, since OTA blocks the loop that sends the component's
queued commands) and a device info popup (version, build time, IPs) from the
Info button on the new last card or the show_info API action. The OTA gets
id ota_esphome to extend it. Also documents the NSPanel pinout.
2026-09-29 23:23:14 +02:00
randy
c5ab280725
air-office-r: document hardware, disable the LEDs until the stick is fixed
...
The TZT 8-bit WS2812 stick lights up random colours after the first LED.
2026-09-29 23:22:17 +02:00
randy
1a2aec5d01
Document hardware, pinout and I2C devices in a header comment of every device
...
Merge the old pinout comment blocks into the header and mark what each pin is used for.
2026-09-29 23:22:17 +02:00
randy
882428e491
Move echo's to ipv6 only network
2026-09-29 21:53:38 +02:00
randy
20f6db5a70
ipv6_only: take audio from esphome#19750
2026-09-29 19:42:15 +02:00
randy
b8738b39e0
fix: update patio status entity ID to match old naming convention
CI / ESPHome config validation (push) Failing after 9s
CI / YAML lint (push) Failing after 38s
2026-09-29 08:38:48 +02:00
randy
7ee975875a
nspanel-patio: right button toggles the relay unless mcu-patio is online
CI / ESPHome config validation (push) Failing after 7s
CI / YAML lint (push) Failing after 38s
2026-09-29 00:03:03 +02:00
randy
dd508aec99
m5paper: replace the weather forecast with a calendar (birthdays, waste collection), wake up once a day, IPv6-only
2026-09-28 23:40:13 +02:00
randy
e13be73596
m5paper: clear-night icon for sunny hours without UV, center hourly temperature without precipitation
2026-09-28 23:13:31 +02:00
randy
b523963944
TFT: switch to LVGL, add XPT2046 touch
2026-09-28 23:13:00 +02:00
randy
6ca813fb64
Pin speaker override (esphome#19862) for stackchan/echo, migrate echo codec option, refresh components hourly
2026-09-28 22:41:08 +02:00
randy
d80abdbb90
Add IPv6 WiFi credentials to secrets.yaml.default to fix CI
2026-09-28 22:03:38 +02:00
randy
29b375df68
nspanel: move shared config to common/nspanel.yaml, add TFT version sensor
CI / ESPHome config validation (push) Failing after 7s
CI / YAML lint (push) Failing after 37s
2026-09-28 20:51:05 +02:00
randy
5db5987405
ipv6_only: pin patched lwip so .local names resolve over IPv6 (esp-lwip#94)
2026-09-28 20:12:22 +02:00
randy
dec5e5de0a
ipv6_only: pin audio override so HTTP reader connects over IPv6
2026-09-28 16:01:28 +02:00
randy
88e1214058
ipv6_only: pin patched espressif/mdns to stop advertising A 0.0.0.0
CI / ESPHome config validation (push) Successful in 10s
CI / YAML lint (push) Failing after 33s
2026-09-28 12:49:33 +02:00
randy