nrf-ant: Garmin HRM-Dual, HRM-Tri, Rally RS200, Speed Sensor 2, SRAM Force AXS

Also sets the unused UART1 RX to P1.02: without it the fork keeps the DK's
default RX pin, P1.01, and the UART hears its own transmissions.

.github/workflows/ci.yml

@@ -55,6 +55,8 @@ jobs:
         if: steps.changed.outputs.any_changed == 'true'
         run: |
           for f in ${{ steps.changed.outputs.all_changed_files }}; do
+            # zephyr: needs the esphomeplatformzephyr fork, upstream doesn't know it yet
+            if grep -q '^zephyr:' "$f"; then echo "Skipping $f (zephyr fork)"; continue; fi
             echo "Validating $f..."
             esphome config "$f"
           done

mcu-nrf-ant.yaml

@@ -0,0 +1,186 @@
+---
+# Hardware: Nordic nRF52840 DK
+# Pinout:
+#   P0.06   UART0 TX                   -> logger (J-Link VCOM)
+#   P0.13   LED 1 (active low)         -> ANT+ Connected (a configured device is received)
+#   P0.14   LED 2 (active low)         -> ANT+ Unknown Device (an unconfigured one is in range)
+#   P1.01   UART1 TX                   -> mcu-nrf-dk UART1 RX (P1.01), packet_transport; plus GND
+#   P1.02   UART1 RX                   (unused)
+# Radio: ANT+ receiver (RadiANT), no network of its own; values go to mcu-nrf-dk
+# ANT+ devices:
+#   655730   Garmin HRM-Pro          heart rate
+#   498521   Concept2 PM5 (rower)    fitness equipment (FE-C)
+#   1044953  Garmin Tempe            environment (temperature)
+#   604693   Garmin Varia RTL515     bike radar, battery only
+#   136052   Garmin HRM-Dual         heart rate (pain cave)
+#   334424   Garmin HRM-Tri          heart rate (bike)
+#   886796   Garmin Rally RS200      power + cadence
+#   343922   Garmin Speed Sensor 2   speed
+#   42898    SRAM Force AXS          shifting (Cube Litening C:68X), battery only
+esphome:
+  name: mcu-nrf-ant
+  friendly_name: nRF ANT+
+
+# needs the esphomeplatformzephyr fork (esphome-zephyr); RadiANT needs NCS
+zephyr:
+  variant: NRF52
+  board: nrf52840dk/nrf52840
+  framework:
+    type: ncs
+
+logger:
+  hardware_uart: UART0
+
+external_components:
+  - source: github://randybb/esphome-components
+    components: [ant_plus]
+
+output:
+  - platform: gpio
+    id: led_known
+    pin: {number: P0.13, inverted: true}
+  - platform: gpio
+    id: led_unknown
+    pin: {number: P0.14, inverted: true}
+
+ant_plus:
+  network_key: !secret ant_plus_network_key
+  connected:
+    id: ant_connected
+    name: ANT+ Connected
+    on_press: {output.turn_on: led_known}
+    on_release: {output.turn_off: led_known}
+  unknown_device:
+    id: ant_unknown_device
+    name: ANT+ Unknown Device
+    on_press: {output.turn_on: led_unknown}
+    on_release: {output.turn_off: led_unknown}
+  devices:
+    - type: heart_rate  # Garmin HRM-Pro
+      device_number: 655730
+      heart_rate:
+        id: hrm_pro_heart_rate
+        name: Garmin HRM-Pro Heart Rate
+      battery_level:
+        id: hrm_pro_battery
+        name: Garmin HRM-Pro Battery
+    - type: fitness_equipment  # Concept2 PM5 (rower)
+      device_number: 498521
+      power:
+        id: pm5_power
+        name: Concept2 PM5 Power
+      cadence:
+        id: pm5_stroke_rate
+        name: Concept2 PM5 Stroke Rate
+      in_use:
+        id: pm5_in_use
+        name: Concept2 PM5 In Use
+    - type: temperature  # Garmin Tempe
+      device_number: 1044953
+      temperature:
+        id: tempe_temperature
+        name: Garmin Tempe Temperature
+      temperature_min:
+        id: tempe_temperature_min
+        name: Garmin Tempe Temperature 24h Min
+      temperature_max:
+        id: tempe_temperature_max
+        name: Garmin Tempe Temperature 24h Max
+      battery_voltage:
+        id: tempe_battery
+        name: Garmin Tempe Battery
+      battery_low:
+        id: tempe_battery_low
+        name: Garmin Tempe Battery Low
+    - type: bike_radar  # Garmin Varia RTL515
+      device_number: 604693
+      battery_voltage:
+        id: varia_battery
+        name: Garmin Varia RTL515 Battery
+      battery_low:
+        id: varia_battery_low
+        name: Garmin Varia RTL515 Battery Low
+    - type: heart_rate  # Garmin HRM-Dual
+      device_number: 136052
+      heart_rate:
+        id: hrm_dual_heart_rate
+        name: Garmin HRM-Dual Heart Rate
+      battery_level:
+        id: hrm_dual_battery
+        name: Garmin HRM-Dual Battery
+    - type: heart_rate  # Garmin HRM-Tri
+      device_number: 334424
+      heart_rate:
+        id: hrm_tri_heart_rate
+        name: Garmin HRM-Tri Heart Rate
+      battery_level:
+        id: hrm_tri_battery
+        name: Garmin HRM-Tri Battery
+    - type: power  # Garmin Rally RS200 (a battery in each pedal)
+      device_number: 886796
+      power:
+        id: rally_power
+        name: Garmin Rally RS200 Power
+      cadence:
+        id: rally_cadence
+        name: Garmin Rally RS200 Cadence
+      battery_low:
+        id: rally_battery_low
+        name: Garmin Rally RS200 Battery Low
+    - type: speed  # Garmin Speed Sensor 2
+      device_number: 343922
+      speed:
+        id: speed2_speed
+        name: Garmin Speed Sensor 2 Speed
+      battery_voltage:
+        id: speed2_battery
+        name: Garmin Speed Sensor 2 Battery
+      battery_low:
+        id: speed2_battery_low
+        name: Garmin Speed Sensor 2 Battery Low
+    - type: shifting  # SRAM Force AXS (Cube Litening C:68X)
+      device_number: 42898
+      battery_low:
+        id: sram_battery_low
+        name: SRAM Force AXS Battery Low
+
+uart:
+  id: link
+  port: UART1
+  tx_pin: P1.01
+  # unused, but must be set: the fork otherwise keeps the board's default RX, which on
+  # the DK is P1.01 too, and the UART hears its own transmissions
+  rx_pin: P1.02
+  baud_rate: 115200
+
+packet_transport:
+  - platform: uart
+    uart_id: link
+    update_interval: 1s
+    sensors:
+      - hrm_pro_heart_rate
+      - hrm_pro_battery
+      - pm5_power
+      - pm5_stroke_rate
+      - tempe_temperature
+      - tempe_temperature_min
+      - tempe_temperature_max
+      - tempe_battery
+      - varia_battery
+      - hrm_dual_heart_rate
+      - hrm_dual_battery
+      - hrm_tri_heart_rate
+      - hrm_tri_battery
+      - rally_power
+      - rally_cadence
+      - speed2_speed
+      - speed2_battery
+    binary_sensors:
+      - ant_connected
+      - ant_unknown_device
+      - pm5_in_use
+      - tempe_battery_low
+      - varia_battery_low
+      - rally_battery_low
+      - speed2_battery_low
+      - sram_battery_low

mcu-nrf-dk.yaml

@@ -1,12 +1,293 @@
 ---
 # Hardware: Nordic nRF52840 DK
+# Pinout:
+#   P0.11   Button 1 (active low)      -> Button 1 (binary_sensor gpio)
+#   P0.12   Button 2 (active low)      -> Button 2 (binary_sensor gpio)
+#   P0.13   LED 1 (active low)         -> LED 1 (light binary)
+#   P0.14   LED 2 (active low)         -> LED 2 (light binary)
+#   P0.15   LED 3 (active low)         -> LED 3 (light binary)
+#   P0.16   LED 4 (active low)         -> LED 4 (light binary)
+#   P0.24   Button 3 (active low)      -> Button 3 (binary_sensor gpio)
+#   P0.25   Button 4 (active low)      -> Button 4 (binary_sensor gpio)
+#   P1.01   UART1 RX                   <- mcu-nrf-ant UART1 TX (P1.01), packet_transport; plus GND
+# ANT+ values (Garmin HRM-Pro, Concept2 PM5, Garmin Tempe, Garmin Varia RTL515) come from mcu-nrf-ant
 esphome:
   name: mcu-nrf-dk
-  friendly_name: mcu-nrf-dk
+  friendly_name: nRF DK
 
-nrf52:
+# needs the esphomeplatformzephyr fork (esphome-zephyr), upstream has no zephyr: platform yet
-  board: nrf52840_dk
+zephyr:
-  bootloader: adafruit_nrf52_sd140_v7
+  variant: NRF52
+  board: nrf52840dk/nrf52840
+  framework:
+    type: zephyr
 
-# Enable logging
 logger:
+
+network:
+  enable_ipv6: true
+
+# Active dataset of the Thread network (HA: Settings > Thread > ... > dataset TLV)
+openthread:
+  tlv: !secret thread_tlv
+  # end device, doesn't route for others; saves flash (FTD fills the MCUboot slot)
+  device_type: MTD
+
+api:
+  encryption:
+    key: !secret api_key
+
+# ANT+ values from mcu-nrf-ant (second nRF52840 DK) over UART
+uart:
+  id: ant_link
+  port: UART1
+  rx_pin: P1.01
+  baud_rate: 115200
+
+packet_transport:
+  - platform: uart
+    uart_id: ant_link
+    providers:
+      - name: mcu-nrf-ant
+
+sensor:
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_pro_heart_rate
+    name: Garmin HRM-Pro Heart Rate
+    internal: false
+    unit_of_measurement: bpm
+    icon: mdi:heart-pulse
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_pro_battery
+    name: Garmin HRM-Pro Battery
+    internal: false
+    unit_of_measurement: "%"
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: pm5_power
+    name: Concept2 PM5 Power
+    internal: false
+    unit_of_measurement: W
+    device_class: power
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: pm5_stroke_rate
+    name: Concept2 PM5 Stroke Rate
+    internal: false
+    unit_of_measurement: spm
+    icon: mdi:rowing
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: tempe_temperature
+    name: Garmin Tempe Temperature
+    internal: false
+    unit_of_measurement: °C
+    device_class: temperature
+    accuracy_decimals: 1
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: tempe_temperature_min
+    name: Garmin Tempe Temperature 24h Min
+    internal: false
+    unit_of_measurement: °C
+    device_class: temperature
+    accuracy_decimals: 1
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: tempe_temperature_max
+    name: Garmin Tempe Temperature 24h Max
+    internal: false
+    unit_of_measurement: °C
+    device_class: temperature
+    accuracy_decimals: 1
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: tempe_battery
+    name: Garmin Tempe Battery
+    internal: false
+    unit_of_measurement: V
+    device_class: voltage
+    accuracy_decimals: 2
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: varia_battery
+    name: Garmin Varia RTL515 Battery
+    internal: false
+    unit_of_measurement: V
+    device_class: voltage
+    accuracy_decimals: 2
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_dual_heart_rate
+    name: Garmin HRM-Dual Heart Rate
+    internal: false
+    unit_of_measurement: bpm
+    icon: mdi:heart-pulse
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_dual_battery
+    name: Garmin HRM-Dual Battery
+    internal: false
+    unit_of_measurement: "%"
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_tri_heart_rate
+    name: Garmin HRM-Tri Heart Rate
+    internal: false
+    unit_of_measurement: bpm
+    icon: mdi:heart-pulse
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: hrm_tri_battery
+    name: Garmin HRM-Tri Battery
+    internal: false
+    unit_of_measurement: "%"
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: rally_power
+    name: Garmin Rally RS200 Power
+    internal: false
+    unit_of_measurement: W
+    device_class: power
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: rally_cadence
+    name: Garmin Rally RS200 Cadence
+    internal: false
+    unit_of_measurement: rpm
+    icon: mdi:rotate-right
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: speed2_speed
+    name: Garmin Speed Sensor 2 Speed
+    internal: false
+    unit_of_measurement: m/s
+    device_class: speed
+    accuracy_decimals: 2
+    filters:
+      - throttle: 1s
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: speed2_battery
+    name: Garmin Speed Sensor 2 Battery
+    internal: false
+    unit_of_measurement: V
+    device_class: voltage
+    accuracy_decimals: 2
+    entity_category: diagnostic
+
+output:
+  - platform: gpio
+    id: led_1_out
+    pin: {number: P0.13, inverted: true}
+  - platform: gpio
+    id: led_2_out
+    pin: {number: P0.14, inverted: true}
+  - platform: gpio
+    id: led_3_out
+    pin: {number: P0.15, inverted: true}
+  - platform: gpio
+    id: led_4_out
+    pin: {number: P0.16, inverted: true}
+
+light:
+  - {platform: binary, name: LED 1, id: led_1, output: led_1_out}
+  - {platform: binary, name: LED 2, id: led_2, output: led_2_out}
+  - {platform: binary, name: LED 3, id: led_3, output: led_3_out}
+  - {platform: binary, name: LED 4, id: led_4, output: led_4_out}
+
+# each button toggles its LED locally and is visible in HA
+binary_sensor:
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: ant_connected
+    name: ANT+ Connected
+    internal: false
+    device_class: connectivity
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: ant_unknown_device
+    name: ANT+ Unknown Device
+    internal: false
+    icon: mdi:access-point
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: pm5_in_use
+    name: Concept2 PM5 In Use
+    internal: false
+    device_class: running
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: tempe_battery_low
+    name: Garmin Tempe Battery Low
+    internal: false
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: varia_battery_low
+    name: Garmin Varia RTL515 Battery Low
+    internal: false
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: rally_battery_low
+    name: Garmin Rally RS200 Battery Low
+    internal: false
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: speed2_battery_low
+    name: Garmin Speed Sensor 2 Battery Low
+    internal: false
+    device_class: battery
+    entity_category: diagnostic
+  - platform: packet_transport
+    provider: mcu-nrf-ant
+    remote_id: sram_battery_low
+    name: SRAM Force AXS Battery Low
+    internal: false
+    device_class: battery
+    entity_category: diagnostic
+  - platform: gpio
+    name: Button 1
+    pin: {number: P0.11, inverted: true, mode: {input: true, pullup: true}}
+    on_press: {light.toggle: led_1}
+  - platform: gpio
+    name: Button 2
+    pin: {number: P0.12, inverted: true, mode: {input: true, pullup: true}}
+    on_press: {light.toggle: led_2}
+  - platform: gpio
+    name: Button 3
+    pin: {number: P0.24, inverted: true, mode: {input: true, pullup: true}}
+    on_press: {light.toggle: led_3}
+  - platform: gpio
+    name: Button 4
+    pin: {number: P0.25, inverted: true, mode: {input: true, pullup: true}}
+    on_press: {light.toggle: led_4}

secrets.yaml.default

@@ -28,4 +28,10 @@ ble_beacon_toyota_auris_major: 10167
 ble_beacon_toyota_auris_minor: 61958
 ble_beacon_toyota_yaris_uuid: "00000000-0000-0000-0000-000000000000"
 ble_beacon_toyota_yaris_honda_major: 10167
-ble_beacon_toyota_yaris_honda_minor: 61958
+ble_beacon_toyota_yaris_honda_minor: 61958
+
+# Thread active dataset (hex TLV) from Home Assistant
+thread_tlv: "0E080000000000010000"
+
+# ANT+ network key (8 bytes hex), from thisisant.com
+ant_plus_network_key: "0000000000000000"