NSPanels no longer need an explicit esp_http_client - fixed in the ext component

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

.github/workflows/ci.yml

@@ -0,0 +1,53 @@
+name: CI
+
+on:
+  push:
+    branches: [main]
+  pull_request:
+
+jobs:
+  yamllint:
+    name: YAML lint
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get changed YAML files
+        id: changed
+        uses: tj-actions/changed-files@v46
+        with:
+          files: "**/*.yaml"
+
+      - uses: ibiqlik/action-yamllint@v3
+        if: steps.changed.outputs.any_changed == 'true'
+        with:
+          config_file: .yamllint.yml
+          file_or_dir: ${{ steps.changed.outputs.all_changed_files }}
+
+  validate:
+    name: ESPHome config validation
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get changed device configs
+        id: changed
+        uses: tj-actions/changed-files@v46
+        with:
+          files: "mcu-*.yaml"
+
+      - name: Install ESPHome (dev)
+        if: steps.changed.outputs.any_changed == 'true'
+        run: pip install git+https://github.com/esphome/esphome.git@dev
+
+      - name: Prepare secrets
+        if: steps.changed.outputs.any_changed == 'true'
+        run: cp secrets.yaml.default secrets.yaml
+
+      - name: Validate changed configs
+        if: steps.changed.outputs.any_changed == 'true'
+        run: |
+          for f in ${{ steps.changed.outputs.all_changed_files }}; do
+            echo "Validating $f..."
+            esphome config "$f"
+          done

.yamllint.yml

@@ -0,0 +1,27 @@
+extends: default
+
+rules:
+  # ESPHome uses True/False (Python style) and yes/no
+  truthy:
+    allowed-values: ["true", "false", "True", "False", "yes", "no", "on", "off", "ON", "OFF"]
+    check-keys: false
+
+  # Lambdas and long substitutions can exceed 80 chars
+  line-length:
+    max: 200
+    level: warning
+
+  # Not all files use --- document start marker
+  document-start: disable
+
+  # ESPHome uses both indented and non-indented sequences
+  indentation:
+    spaces: 2
+    indent-sequences: whatever
+    check-multi-line-strings: false
+
+  # Some files have trailing spaces; warn only
+  trailing-spaces: enable
+
+  comments:
+    require-starting-space: false

arduino_port_expander.h

@@ -1,311 +0,0 @@
-// Must disable logging if using logging in main.cpp or in other custom components for the
-//  __c causes a section type conflict with __c thingy
-// you can enable logging and use it if you enable this in logger:
-/*
-logger:
-  level: DEBUG
-  esp8266_store_log_strings_in_flash: False
-  */
-
-//#define APE_LOGGING
-
-// take advantage of LOG_ defines to decide which code to include
-#ifdef LOG_BINARY_OUTPUT
-#define APE_BINARY_OUTPUT
-#endif
-#ifdef LOG_BINARY_SENSOR
-#define APE_BINARY_SENSOR
-#endif
-#ifdef LOG_SENSOR
-#define APE_SENSOR
-#endif
-
-static const char *TAGape = "ape";
-
-#define APE_CMD_DIGITAL_READ 0
-#define APE_CMD_WRITE_ANALOG 2
-#define APE_CMD_WRITE_DIGITAL_HIGH 3
-#define APE_CMD_WRITE_DIGITAL_LOW 4
-#define APE_CMD_SETUP_PIN_OUTPUT 5
-#define APE_CMD_SETUP_PIN_INPUT_PULLUP 6
-#define APE_CMD_SETUP_PIN_INPUT 7
-// 8 analog registers.. A0 to A7
-// A4 and A5 not supported due to I2C
-#define CMD_ANALOG_READ_A0 0b1000 // 0x8
-// ....
-#define CMD_ANALOG_READ_A7 0b1111 // 0xF
-
-#define CMD_SETUP_ANALOG_INTERNAL 0x10
-#define CMD_SETUP_ANALOG_DEFAULT 0x11
-
-#define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
-
-#define ape_binary_output(ape, pin) get_ape(ape)->get_binary_output(pin)
-#define ape_binary_sensor(ape, pin) get_ape(ape)->get_binary_sensor(pin)
-#define ape_analog_input(ape, pin) get_ape(ape)->get_analog_input(pin)
-
-class ArduinoPortExpander;
-
-using namespace esphome;
-
-#ifdef APE_BINARY_OUTPUT
-class ApeBinaryOutput : public output::BinaryOutput
-{
-public:
-  ApeBinaryOutput(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->parent_ = parent;
-    this->pin_ = pin;
-  }
-  void write_state(bool state) override;
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  ArduinoPortExpander *parent_;
-  uint8_t pin_;
-  // Pins are setup as output after the state is written, Arduino has no open drain outputs, after setting an output it will either sink or source thus activating outputs writen to false during a flick.
-  bool setup_{true};
-  bool state_{false};
-
-  friend class ArduinoPortExpander;
-};
-#endif
-
-#ifdef APE_BINARY_SENSOR
-class ApeBinarySensor : public binary_sensor::BinarySensor
-{
-public:
-  ApeBinarySensor(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->pin_ = pin;
-  }
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  uint8_t pin_;
-};
-#endif
-
-#ifdef APE_SENSOR
-class ApeAnalogInput : public sensor::Sensor
-{
-public:
-  ApeAnalogInput(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->pin_ = pin;
-  }
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  uint8_t pin_;
-};
-#endif
-
-class ArduinoPortExpander : public Component, public I2CDevice
-{
-public:
-  ArduinoPortExpander(I2CBus *bus, uint8_t address, bool vref_default = false)
-  {
-    set_i2c_address(address);
-    set_i2c_bus(bus);
-    this->vref_default_ = vref_default;
-  }
-  void setup() override
-  {
-#ifdef APE_LOGGING
-    ESP_LOGCONFIG(TAGape, "Setting up ArduinoPortExpander at %#02x ...", address_);
-#endif
-
-    /* We cannot setup as usual as arduino boots later than esp8266
-
-            Poll i2c bus for our Arduino for a n seconds instead of failing fast,
-            also this is important as pin setup (INPUT_PULLUP, OUTPUT it's done once)
-        */
-    this->configure_timeout_ = millis() + 5000;
-  }
-  void loop() override
-  {
-    if (millis() < this->configure_timeout_)
-    {
-      bool try_configure = millis() % 100 > 50;
-      if (try_configure == this->configure_)
-        return;
-      this->configure_ = try_configure;
-
-      if (ERROR_OK == this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 3))
-      {
-#ifdef APE_LOGGING
-        ESP_LOGCONFIG(TAGape, "ArduinoPortExpander found at %#02x", address_);
-#endif
-        delay(10);
-        if (this->vref_default_)
-        {
-          this->write_register(CMD_SETUP_ANALOG_DEFAULT, nullptr, 0); // 0: unused
-        }
-
-        // Config success
-        this->configure_timeout_ = 0;
-        this->status_clear_error();
-#ifdef APE_BINARY_SENSOR
-        for (ApeBinarySensor *pin : this->input_pins_)
-        {
-          App.feed_wdt();
-          uint8_t pinNo = pin->get_pin();
-#ifdef APE_LOGGING
-          ESP_LOGCONFIG(TAGape, "Setup input pin %d", pinNo);
-#endif
-          this->write_register(APE_CMD_SETUP_PIN_INPUT_PULLUP, &pinNo, 1);
-          delay(20);
-        }
-#endif
-#ifdef APE_BINARY_OUTPUT
-        for (ApeBinaryOutput *output : this->output_pins_)
-        {
-          if (!output->setup_)
-          { // this output has a valid value already
-            this->write_state(output->pin_, output->state_, true);
-            App.feed_wdt();
-            delay(20);
-          }
-        }
-#endif
-#ifdef APE_SENSOR
-        for (ApeAnalogInput *sensor : this->analog_pins_)
-        {
-          App.feed_wdt();
-          uint8_t pinNo = sensor->get_pin();
-#ifdef APE_LOGGING
-          ESP_LOGCONFIG(TAGape, "Setup analog input pin %d", pinNo);
-#endif
-          this->write_register(APE_CMD_SETUP_PIN_INPUT, &pinNo, 1);
-          delay(20);
-        }
-#endif
-        return;
-      }
-      // Still not answering
-      return;
-    }
-    if (this->configure_timeout_ != 0 && millis() > this->configure_timeout_)
-    {
-#ifdef APE_LOGGING
-      ESP_LOGE(TAGape, "ArduinoPortExpander NOT found at %#02x", address_);
-#endif
-      this->mark_failed();
-      return;
-    }
-
-#ifdef APE_BINARY_SENSOR
-    if (ERROR_OK != this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 3))
-    {
-#ifdef APE_LOGGING
-      ESP_LOGE(TAGape, "Error reading. Reconfiguring pending.");
-#endif
-      this->status_set_error();
-      this->configure_timeout_ = millis() + 5000;
-      return;
-    }
-    for (ApeBinarySensor *pin : this->input_pins_)
-    {
-      uint8_t pinNo = pin->get_pin();
-
-      uint8_t bit = pinNo % 8;
-      uint8_t value = pinNo < 8 ? this->read_buffer_[0] : pinNo < 16 ? this->read_buffer_[1] : this->read_buffer_[2];
-      bool ret = value & (1 << bit);
-      if (this->initial_state_)
-        pin->publish_initial_state(ret);
-      else
-        pin->publish_state(ret);
-    }
-#endif
-#ifdef APE_SENSOR
-    for (ApeAnalogInput *pin : this->analog_pins_)
-    {
-      uint8_t pinNo = pin->get_pin();
-      pin->publish_state(analogRead(pinNo));
-    }
-#endif
-    this->initial_state_ = false;
-  }
-
-#ifdef APE_SENSOR
-  uint16_t analogRead(uint8_t pin)
-  {
-    bool ok = (ERROR_OK == this->read_register((uint8_t)(CMD_ANALOG_READ_A0 + pin), const_cast<uint8_t *>(this->read_buffer_), 2));
-#ifdef APE_LOGGING
-    ESP_LOGVV(TAGape, "analog read pin: %d ok: %d byte0: %d byte1: %d", pin, ok, this->read_buffer_[0], this->read_buffer_[1]);
-#endif
-    uint16_t value = this->read_buffer_[0] | ((uint16_t)this->read_buffer_[1] << 8);
-    return value;
-  }
-#endif
-
-#ifdef APE_BINARY_OUTPUT
-  output::BinaryOutput *get_binary_output(uint8_t pin)
-  {
-    ApeBinaryOutput *output = new ApeBinaryOutput(this, pin);
-    output_pins_.push_back(output);
-    return output;
-  }
-#endif
-#ifdef APE_BINARY_SENSOR
-  binary_sensor::BinarySensor *get_binary_sensor(uint8_t pin)
-  {
-    ApeBinarySensor *binarySensor = new ApeBinarySensor(this, pin);
-    input_pins_.push_back(binarySensor);
-    return binarySensor;
-  }
-#endif
-#ifdef APE_SENSOR
-  sensor::Sensor *get_analog_input(uint8_t pin)
-  {
-    ApeAnalogInput *input = new ApeAnalogInput(this, pin);
-    analog_pins_.push_back(input);
-    return input;
-  }
-#endif
-  void write_state(uint8_t pin, bool state, bool setup = false)
-  {
-    if (this->configure_timeout_ != 0)
-      return;
-#ifdef APE_LOGGING
-    ESP_LOGD(TAGape, "Writing %d to pin %d", state, pin);
-#endif
-    this->write_register(state ? APE_CMD_WRITE_DIGITAL_HIGH : APE_CMD_WRITE_DIGITAL_LOW, &pin, 1);
-    if (setup)
-    {
-      App.feed_wdt();
-      delay(20);
-#ifdef APE_LOGGING
-      ESP_LOGI(TAGape, "Setup output pin %d", pin);
-#endif
-      this->write_register(APE_CMD_SETUP_PIN_OUTPUT, &pin, 1);
-    }
-  }
-
-protected:
-  bool configure_{true};
-  bool initial_state_{true};
-  uint8_t read_buffer_[3]{0, 0, 0};
-  unsigned long configure_timeout_{5000};
-  bool vref_default_{false};
-
-#ifdef APE_BINARY_OUTPUT
-  std::vector<ApeBinaryOutput *> output_pins_;
-#endif
-#ifdef APE_BINARY_SENSOR
-  std::vector<ApeBinarySensor *> input_pins_;
-#endif
-#ifdef APE_SENSOR
-  std::vector<ApeAnalogInput *> analog_pins_;
-#endif
-};
-
-#ifdef APE_BINARY_OUTPUT
-void ApeBinaryOutput::write_state(bool state)
-{
-  this->state_ = state;
-  this->parent_->write_state(this->pin_, state, this->setup_);
-  this->setup_ = false;
-}
-#endif

common/gate_beacon_close.yaml

@@ -0,0 +1,9 @@
+- if:
+    condition:
+      and:
+        - switch.is_on: ${enable_id}
+        - switch.is_on: auto_close
+        - lambda: 'return id(beacon_count) == 1;'
+    then:
+      - button.press: gate_close
+- lambda: 'id(beacon_count) -= 1;'

common/gate_beacon_open.yaml

@@ -0,0 +1,9 @@
+- lambda: 'id(beacon_count) += 1;'
+- if:
+    condition:
+      and:
+        - switch.is_on: ${enable_id}
+        - switch.is_on: auto_open
+        - lambda: 'return id(beacon_count) == 1;'
+    then:
+      - button.press: gate_open

common/vehicle_base.yaml

@@ -0,0 +1,105 @@
+esp32:
+  variant: esp32
+  framework:
+    type: esp-idf
+
+external_components:
+  - source: components
+
+# PINOUTS: M5ATOM
+# IR        G12
+# NEO       G27
+# BUTTON    G39
+# I2C0 SDA  G26
+# I2C0 SCL  G32
+# I2C1 SDA  G25
+# I2C1 SCL  G21
+# UART0 RX  G3
+# UART0 TX  G1
+# UART1 RX  G23
+# UART1 TX  G33
+# 1-WIRE    G22
+# NC        G19
+
+esphome:
+  on_loop:
+    then:
+      lambda: |-
+        static uint32_t last_state = 0;
+        auto state = App.get_app_state();
+        if (state != last_state) {
+          if (state & STATUS_LED_ERROR) {
+            auto call = id(led).turn_on();
+            call.set_effect("ERROR");
+            call.perform();
+          } else if (state & STATUS_LED_WARNING) {
+            auto call = id(led).turn_on();
+            call.set_effect("BOOT");
+            call.perform();
+          } else {
+            auto call = id(led).turn_on();
+            call.set_effect("BEACON");
+            call.perform();
+          }
+          last_state = state;
+        }
+
+light:
+  - platform: esp32_rmt_led_strip
+    name: LED
+    id: led
+    rgb_order: GRB
+    pin: 27
+    num_leds: 1
+    chipset: ws2812
+    restore_mode: ALWAYS_OFF
+    effects:
+      - strobe:
+          name: "BEACON"
+          colors:
+            - state: true
+              red: 0%
+              green: 0%
+              blue: 50%
+              duration: 200ms
+            - state: false
+              duration: 200ms
+            - state: true
+              red: 0%
+              green: 0%
+              blue: 50%
+              duration: 200ms
+            - state: false
+              duration: 10s
+      - lambda:
+          name: "ERROR"
+          update_interval: 0.5s
+          lambda: |-
+            static bool state = false;
+            auto call = id(led).turn_on();
+            call.set_transition_length(500);
+            call.set_rgb(1, 0, 0);
+            if (!state) {
+              call.set_brightness(1);
+            } else {
+              // If using 0, it freaks Home Assistant UI.
+              call.set_brightness(0.01);
+            }
+            call.perform();
+            state = !state;
+      - lambda:
+          name: "BOOT"
+          update_interval: 0.5s
+          lambda: |-
+            static bool state = false;
+            auto call = id(led).turn_on();
+            call.set_transition_length(500);
+            call.set_rgb(0, 1, 0);
+            if (!state) {
+              call.set_brightness(1);
+            } else {
+              // If using 0, it freaks Home Assistant UI.
+              call.set_brightness(0.01);
+            }
+            call.perform();
+            state = !state;

components/bm8563/__init__.py

@@ -1,24 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c
-from esphome.const import CONF_ID, CONF_SLEEP_DURATION
-
-DEPENDENCIES = ['i2c']
-
-CONF_I2C_ADDR = 0x51
-
-bm8563 = cg.esphome_ns.namespace('bm8563')
-BM8563 = bm8563.class_('BM8563', cg.Component, i2c.I2CDevice)
-
-CONFIG_SCHEMA = cv.Schema({
-    cv.GenerateID(): cv.declare_id(BM8563),
-    cv.Optional(CONF_SLEEP_DURATION): cv.positive_time_period_seconds,
-}).extend(cv.COMPONENT_SCHEMA).extend(i2c.i2c_device_schema(CONF_I2C_ADDR))
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    if CONF_SLEEP_DURATION in config:
-        cg.add(var.set_sleep_duration(config[CONF_SLEEP_DURATION]))
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)
-    

components/bm8563/bm8563.cpp

@@ -1,242 +0,0 @@
-#include "esphome/core/log.h"
-#include "esphome/components/i2c/i2c_bus.h"
-#include "bm8563.h"
-
-namespace esphome {
-namespace bm8563 {
-
-static const char *TAG = "bm8563.sensor";
-
-void BM8563::setup(){
-  this->write_byte_16(0,0);
-  this->setupComplete = true;
-  if (this->sleep_duration_.has_value()) {
-    SetAlarmIRQ(*this->sleep_duration_);
-  }
-}
-
-void BM8563::loop(){
-  // if(!this->setupComplete){
-  //   return;
-  // }
-  // BM8563_TimeTypeDef BM8563_TimeStruct;
-  // getTime(&BM8563_TimeStruct);
-  // this->publish_state(BM8563_TimeStruct.seconds);
-}
-
-void BM8563::dump_config(){
-  ESP_LOGCONFIG(TAG, "BM8563:");
-  ESP_LOGCONFIG(TAG, "  Address: 0x%02X", this->address_);
-  ESP_LOGCONFIG(TAG, "  setupComplete: %s", this->setupComplete ? "true" : "false");
-  if (this->sleep_duration_.has_value()) {
-    uint32_t duration = *this->sleep_duration_;
-    ESP_LOGCONFIG(TAG, "  Sleep Duration: %u ms", duration);
-  }
-}
-
-void BM8563::set_sleep_duration(uint32_t time_s) {
-  this->sleep_duration_ = uint64_t(time_s);
-  if (this->sleep_duration_.has_value()) {
-    SetAlarmIRQ(*this->sleep_duration_);
-  }
-}
-
-bool BM8563::getVoltLow() {
-  uint8_t data = ReadReg(0x02);
-  return data & 0x80; // RTCC_VLSEC_MASK
-}
-
-uint8_t BM8563::bcd2ToByte(uint8_t value) {
-  uint8_t tmp = 0;
-  tmp = ((uint8_t)(value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
-  return (tmp + (value & (uint8_t)0x0F));
-}
-
-uint8_t BM8563::byteToBcd2(uint8_t value) {
-  uint8_t bcdhigh = 0;
-
-  while (value >= 10) {
-    bcdhigh++;
-    value -= 10;
-  }
-
-  return ((uint8_t)(bcdhigh << 4) | value);
-}
-
-void BM8563::getTime(BM8563_TimeTypeDef* BM8563_TimeStruct) {
-  uint8_t buf[3] = {0};
-
-  this->read_register(0x02, buf, 3);
-
-  BM8563_TimeStruct->seconds = bcd2ToByte(buf[0] & 0x7f);
-  BM8563_TimeStruct->minutes = bcd2ToByte(buf[1] & 0x7f);
-  BM8563_TimeStruct->hours   = bcd2ToByte(buf[2] & 0x3f);
-}
-
-void BM8563::setTime(BM8563_TimeTypeDef* BM8563_TimeStruct) {
-  if (BM8563_TimeStruct == NULL) {
-    return;
-  }
-  uint8_t buf[3] = {byteToBcd2(BM8563_TimeStruct->seconds), byteToBcd2(BM8563_TimeStruct->minutes), byteToBcd2(BM8563_TimeStruct->hours)};
-
-  this->write_register(0x02, buf, 3);
-}
-
-void BM8563::getDate(BM8563_DateTypeDef* BM8563_DateStruct) {
-  uint8_t buf[4] = {0};
-  this->read_register(0x05, buf, 4);
-
-  BM8563_DateStruct->date    = bcd2ToByte(buf[0] & 0x3f);
-  BM8563_DateStruct->weekDay = bcd2ToByte(buf[1] & 0x07);
-  BM8563_DateStruct->month   = bcd2ToByte(buf[2] & 0x1f);
-
-  if (buf[2] & 0x80) {
-    BM8563_DateStruct->year = 1900 + bcd2ToByte(buf[3] & 0xff);
-  } else {
-    BM8563_DateStruct->year = 2000 + bcd2ToByte(buf[3] & 0xff);
-  }
-}
-
-void BM8563::setDate(BM8563_DateTypeDef* BM8563_DateStruct) {
-  if (BM8563_DateStruct == NULL) {
-    return;
-  }
-  uint8_t buf[4] = {byteToBcd2(BM8563_DateStruct->date), byteToBcd2(BM8563_DateStruct->weekDay), 0, byteToBcd2((uint8_t)(BM8563_DateStruct->year % 100))};
-
-
-  if (BM8563_DateStruct->year < 2000) {
-    buf[3] = byteToBcd2(BM8563_DateStruct->month) | 0x80;
-  } else {
-    buf[3] = byteToBcd2(BM8563_DateStruct->month) | 0x00;
-  }
-
-  this->write_register(0x05, buf, 4);
-}
-
-void BM8563::WriteReg(uint8_t reg, uint8_t data) {
-  this->write_byte(reg, data);
-}
-
-uint8_t BM8563::ReadReg(uint8_t reg) {
-  uint8_t data;
-  this->read_register(reg, &data, 1);
-  return data;
-}
-
-int BM8563::SetAlarmIRQ(int afterSeconds) {
-  uint8_t reg_value = 0;
-  reg_value = ReadReg(0x01);
-
-  if (afterSeconds < 0) {
-    reg_value &= ~(1 << 0);
-    WriteReg(0x01, reg_value);
-    reg_value = 0x03;
-    WriteReg(0x0E, reg_value);
-    return -1;
-  }
-
-  uint8_t type_value = 2;
-  uint8_t div = 1;
-  if (afterSeconds > 255) {
-    div = 60;
-    type_value = 0x83;
-  } else {
-    type_value = 0x82;
-  }
-
-  afterSeconds = (afterSeconds / div) & 0xFF;
-  WriteReg(0x0F, afterSeconds);
-  WriteReg(0x0E, type_value);
-
-  reg_value |= (1 << 0);
-  reg_value &= ~(1 << 7);
-  WriteReg(0x01, reg_value);
-  return afterSeconds * div;
-}
-
-int BM8563::SetAlarmIRQ(const BM8563_TimeTypeDef &BM8563_TimeStruct) {
-  uint8_t irq_enable = false;
-  uint8_t out_buf[4] = {0x80, 0x80, 0x80, 0x80};
-
-  if (BM8563_TimeStruct.minutes >= 0) {
-    irq_enable = true;
-    out_buf[0] = byteToBcd2(BM8563_TimeStruct.minutes) & 0x7f;
-  }
-
-  if (BM8563_TimeStruct.hours >= 0) {
-    irq_enable = true;
-    out_buf[1] = byteToBcd2(BM8563_TimeStruct.hours) & 0x3f;
-  }
-
-  out_buf[2] = 0x00;
-  out_buf[3] = 0x00;
-
-  uint8_t reg_value = ReadReg(0x01);
-
-  if (irq_enable) {
-    reg_value |= (1 << 1);
-  } else {
-    reg_value &= ~(1 << 1);
-  }
-
-  for (int i = 0; i < 4; i++) {
-    WriteReg(0x09 + i, out_buf[i]);
-  }
-  WriteReg(0x01, reg_value);
-
-  return irq_enable ? 1 : 0;
-}
-
-int BM8563::SetAlarmIRQ(const BM8563_DateTypeDef &BM8563_DateStruct, const BM8563_TimeTypeDef &BM8563_TimeStruct) {
-  uint8_t irq_enable = false;
-  uint8_t out_buf[4] = {0x80, 0x80, 0x80, 0x80};
-
-  if (BM8563_TimeStruct.minutes >= 0) {
-    irq_enable = true;
-    out_buf[0] = byteToBcd2(BM8563_TimeStruct.minutes) & 0x7f;
-  }
-
-  if (BM8563_TimeStruct.hours >= 0) {
-    irq_enable = true;
-    out_buf[1] = byteToBcd2(BM8563_TimeStruct.hours) & 0x3f;
-  }
-
-  if (BM8563_DateStruct.date >= 0) {
-    irq_enable = true;
-    out_buf[2] = byteToBcd2(BM8563_DateStruct.date) & 0x3f;
-  }
-
-  if (BM8563_DateStruct.weekDay >= 0) {
-    irq_enable = true;
-    out_buf[3] = byteToBcd2(BM8563_DateStruct.weekDay) & 0x07;
-  }
-
-  uint8_t reg_value = ReadReg(0x01);
-
-  if (irq_enable) {
-    reg_value |= (1 << 1);
-  } else {
-    reg_value &= ~(1 << 1);
-  }
-
-  for (int i = 0; i < 4; i++) {
-    WriteReg(0x09 + i, out_buf[i]);
-  }
-  WriteReg(0x01, reg_value);
-
-  return irq_enable ? 1 : 0;
-}
-
-void BM8563::clearIRQ() {
-  uint8_t data = ReadReg(0x01);
-  WriteReg(0x01, data & 0xf3);
-}
-
-void BM8563::disableIRQ() {
-  clearIRQ();
-  uint8_t data = ReadReg(0x01);
-  WriteReg(0x01, data & 0xfC);
-}
-
-}  // namespace bm8563
-}  // namespace esphome

components/bm8563/bm8563.h

@@ -1,62 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
-
-
-namespace esphome {
-namespace bm8563 {
-
-typedef struct
-{
-  int8_t hours;
-  int8_t minutes;
-  int8_t seconds;
-} BM8563_TimeTypeDef;
-
-typedef struct
-{
-  int8_t weekDay;
-  int8_t month;
-  int8_t date;
-  int16_t year;
-} BM8563_DateTypeDef;
-
-class BM8563 : public Component, public i2c::I2CDevice {
-  public:
-    void setup() override;
-    void loop() override;
-    void dump_config() override;
-    
-    void set_sleep_duration(uint32_t time_ms);
-
-    bool getVoltLow();
-
-    void getTime(BM8563_TimeTypeDef* BM8563_TimeStruct);
-    void getDate(BM8563_DateTypeDef* BM8563_DateStruct);
-
-    void setTime(BM8563_TimeTypeDef* BM8563_TimeStruct);
-    void setDate(BM8563_DateTypeDef* BM8563_DateStruct);
-
-    int SetAlarmIRQ(int afterSeconds);
-    int SetAlarmIRQ(const BM8563_TimeTypeDef &BM8563_TimeStruct);
-    int SetAlarmIRQ(const BM8563_DateTypeDef &BM8563_DateStruct, const BM8563_TimeTypeDef &BM8563_TimeStruct);
-
-    void clearIRQ();
-    void disableIRQ();
-
-    void WriteReg(uint8_t reg, uint8_t data);
-    uint8_t ReadReg(uint8_t reg);
-
-  private:
-    uint8_t bcd2ToByte(uint8_t value);
-    uint8_t byteToBcd2(uint8_t value);
-
-    uint8_t trdata[7];
-    optional<uint64_t> sleep_duration_;
-    bool setupComplete;
-};
-
-}  // namespace bm8563
-}  // namespace esphome

components/m5stack_4relay/__init__.py

@@ -1,30 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c
-from esphome.const import CONF_ID
-
-DEPENDENCIES = ["i2c"]
-MULTI_CONF = True
-AUTO_LOAD = ["switch"]
-CODEOWNERS = ["@brotherdust"]
-
-m5stack_4relay_ns = cg.esphome_ns.namespace("m5stack_4relay")
-M5STACK4RELAYOutput = m5stack_4relay_ns.class_(
-    "M5STACK4RELAYSwitchComponent", cg.Component, i2c.I2CDevice
-)
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(M5STACK4RELAYOutput),
-        }
-    )
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(i2c.i2c_device_schema(0x26))
-)
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)

components/m5stack_4relay/m5stack_4relay.cpp

@@ -1,49 +0,0 @@
-#include "m5stack_4relay.h"
-#include <bitset>
-#include "esphome/core/log.h"
-namespace esphome {
-namespace m5stack_4relay {
-static const char *const TAG = "m5stack_4relay.switch";
-
-void M5STACK4RELAYSwitchComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up M5STACK4RELAY (0x%02X)...", this->address_);
-  component_status = 0;
-  get_status(&component_status);
-  ESP_LOGD(TAG, "Setup Status 0x%02X", component_status);
-}
-
-M5STACK4RELAYChannel *M5STACK4RELAYSwitchComponent::create_channel(uint8_t channel) {
-  return new M5STACK4RELAYChannel(this, channel);
-}
-
-void M5STACK4RELAYSwitchComponent::get_status(uint8_t *state) { this->read_byte(RELAY_CONTROL_REG); }
-
-bool M5STACK4RELAYSwitchComponent::set_channel_value_(uint8_t channel, bool state) {
-  get_status(&component_status);
-
-  ESP_LOGD(TAG, "Current status 0x%02X", component_status);
-  ESP_LOGD(TAG, "Desired channel: %1u", channel);
-  ESP_LOGD(TAG, "Desired state: %1u", state);
-
-  channel = 3 - channel;
-  if (state) {
-    component_status |= (1u << channel);
-  } else {
-    component_status &= ~(1u << channel);
-  }
-
-  ESP_LOGD(TAG, "New status 0x%02X", component_status);
-
-  return this->write_byte(this->address_, RELAY_CONTROL_REG, component_status);
-}
-
-void M5STACK4RELAYChannel::write_state(bool state) {
-  if (!this->set_channel_value_(this->channel_, state)) {
-    publish_state(false);
-  } else {
-    publish_state(state);
-  }
-}
-
-}  // namespace m5stack_4relay
-}  // namespace esphome

components/m5stack_4relay/m5stack_4relay.h

@@ -1,49 +0,0 @@
-#pragma once
-
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/components/switch/switch.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace m5stack_4relay {
-
-class M5STACK4RELAYSwitchComponent;
-class M5STACK4RELAYChannel : public switch_::Switch {
- public:
-  M5STACK4RELAYChannel(M5STACK4RELAYSwitchComponent *parent, uint8_t channel) : parent_(parent), channel_(channel) {}
-
- protected:
-  void write_state(bool state) override;
-
-  M5STACK4RELAYSwitchComponent *parent_;
-  uint8_t channel_;
-};
-
-class M5STACK4RELAYSwitchComponent : public Component, public i2c::I2CDevice {
- public:
-  const uint8_t MODE_CONTROL_REG = 0x10;
-  const uint8_t RELAY_CONTROL_REG = 0x11;
-  uint8_t component_status;
-  M5STACK4RELAYSwitchComponent() {}
-  M5STACK4RELAYChannel *create_channel(uint8_t channel);
-
-  void setup() override;
-  float get_setup_priority() const override { return setup_priority::HARDWARE; }
-
- protected:
-  friend M5STACK4RELAYChannel;
-
-  void get_status(uint8_t *state);
-
-  bool set_channel_value_(uint8_t channel, bool state);
-
-  bool read_bytes_(uint8_t a_register, uint8_t *data, uint8_t len, uint32_t conversion) {
-    return this->raw_receive(this->address_, data, len);
-  }
-
-  float value_;
-};
-
-}  // namespace m5stack_4relay
-}  // namespace esphome

components/m5stack_4relay/switch.py

@@ -1,25 +0,0 @@
-import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome.components import switch
-from esphome.const import CONF_ID, CONF_CHANNEL
-from . import M5STACK4RELAYOutput, m5stack_4relay_ns
-
-DEPENDENCIES = ["m5stack_4relay"]
-
-M5STACK4RELAYChannel = m5stack_4relay_ns.class_("M5STACK4RELAYChannel", switch.Switch)
-CONF_M5STACK_4RELAY_ID = "m5stack_4relay_id"
-
-CONFIG_SCHEMA = switch.SWITCH_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(M5STACK4RELAYChannel),
-        cv.GenerateID(CONF_M5STACK_4RELAY_ID): cv.use_id(M5STACK4RELAYOutput),
-        cv.Required(CONF_CHANNEL): cv.int_range(min=0, max=3),
-    }
-)
-
-
-async def to_code(config):
-    paren = await cg.get_variable(config[CONF_M5STACK_4RELAY_ID])
-    rhs = paren.create_channel(config[CONF_CHANNEL])
-    var = cg.Pvariable(config[CONF_ID], rhs)
-    await switch.register_switch(var, config)

components/notes.txt

@@ -1 +0,0 @@
-https://github.com/TomG736/esphome-BM8563

components/pca9536d/README.md

@@ -1,28 +0,0 @@
-# PCA9536D i2c I/O expander
-
-Requires a configured i2c bus
-
-Example:
-```yaml
-pca9536d:
-  - id: my_pca
-
-switch:
-  - platform: gpio
-    pin:
-      pca9536d: my_pca
-      number: 0
-    id: relay
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      pca9536d: my_pca
-      number: 1
-    id: button
-```
-
-# Optional parameters
-
-`address:` defaults to 0x41
-

components/pca9536d/__init__.py

@@ -1,69 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import i2c
-from esphome.const import (
-    CONF_ID,
-    CONF_INPUT,
-    CONF_INVERTED,
-    CONF_NUMBER,
-    CONF_MODE,
-    CONF_OUTPUT,
-)
-
-DEPENDENCIES = ["i2c"]
-MULTI_CONF = True
-
-CONF_PCA9536D = "pca9536d"
-
-pca9536d_ns = cg.esphome_ns.namespace("pca9536d")
-PCA9536DGPIOMode = pca9536d_ns.enum("PCA9536DGPIOMode")
-
-PCA9536D = pca9536d_ns.class_("PCA9536D", cg.Component, i2c.I2CDevice)
-PCA9536DGPIOPin = pca9536d_ns.class_("PCA9536DGPIOPin", cg.GPIOPin)
-
-CONFIG_SCHEMA = cv.COMPONENT_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(PCA9536D),
-    }
-).extend(i2c.i2c_device_schema(0x41))
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-def validate_mode(value):
-    if not (value[CONF_INPUT] or value[CONF_OUTPUT]):
-        raise cv.Invalid("Mode must be either input or output")
-    if value[CONF_INPUT] and value[CONF_OUTPUT]:
-        raise cv.Invalid("Mode must be either input or output")
-    return value
-
-PCA9536D_PIN_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(PCA9536DGPIOPin),
-        cv.Required(CONF_PCA9536D): cv.use_id(PCA9536D),
-        cv.Required(CONF_NUMBER): cv.int_range(min=0, max=7),
-        cv.Optional(CONF_MODE, default={}): cv.All(
-            {
-                cv.Optional(CONF_INPUT, default=False): cv.boolean,
-                cv.Optional(CONF_OUTPUT, default=False): cv.boolean,
-            },
-            validate_mode,
-        ),
-        cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-    }
-)
-
-@pins.PIN_SCHEMA_REGISTRY.register(CONF_PCA9536D, PCA9536D_PIN_SCHEMA)
-async def pca9536d_pin_to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    parent = await cg.get_variable(config[CONF_PCA9536D])
-
-    cg.add(var.set_parent(parent))
-    cg.add(var.set_pin(config[CONF_NUMBER]))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
-    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
-    return var
-

components/pca9536d/pca9536d.cpp

@@ -1,108 +0,0 @@
-#include "pca9536d.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace pca9536d {
-
-static const char *TAG = "pca9536d";
-
-void PCA9536D::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCA9536D...");
-  if (!this->read_gpio_()) {
-    ESP_LOGE(TAG, "PCA9536D not available under 0x%02X", this->address_);
-    this->mark_failed();
-    return;
-  }
-
-  this->write_gpio_();
-}
-
-void PCA9536D::dump_config() {
-  ESP_LOGCONFIG(TAG, "PCA9536D:");
-  LOG_I2C_DEVICE(this)
-  if (this->is_failed())
-    ESP_LOGE(TAG, "Communication with PCA9536D failed!");
-}
-
-bool PCA9536D::digital_read(uint8_t pin) {
-  this->read_gpio_();
-  return this->inputs_ & (1 << pin);
-}
-
-void PCA9536D::digital_write(uint8_t pin, bool value) {
-  if (value)
-    this->outputs_ |= (1 << pin);
-  else
-    this->outputs_ &= ~(1 << pin);
-  this->write_gpio_();
-}
-
-void PCA9536D::set_pin_mode(uint8_t pin, uint8_t mode) {
-  switch (mode) {
-    case gpio::FLAG_INPUT:
-      this->modes_ |= 1 << pin;
-      break;
-    case gpio::FLAG_OUTPUT:
-      this->modes_ &= ~(1 << pin);
-      break;
-  }
-  this->set_modes_();
-}
-
-bool PCA9536D::read_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data;
-  if (!this->read_bytes(0, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->inputs_ = data;
-  this->status_clear_warning();
-  return true;
-}
-
-bool PCA9536D::write_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data = this->outputs_;
-  if (!this->write_bytes(1, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->status_clear_warning();
-  return true;
-}
-
-bool PCA9536D::set_modes_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data = this->modes_;
-  if (!this->write_bytes(3, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->status_clear_warning();
-  return true;
-}
-
-void PCA9536DGPIOPin::setup() { this->pin_mode(this->flags_); }
-
-bool PCA9536DGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
-
-void PCA9536DGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
-
-void PCA9536DGPIOPin::pin_mode(gpio::Flags flags) { this->parent_->set_pin_mode(this->pin_, flags); }
-
-std::string PCA9536DGPIOPin::dump_summary() const {
-  return str_sprintf("%u via PCA9536D", pin_);
-}
-
-}  // namespace pca9536d
-}  // namespace esphome

components/pca9536d/pca9536d.h

@@ -1,52 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/core/hal.h"
-#include "esphome/components/i2c/i2c.h"
-
-namespace esphome {
-namespace pca9536d {
-
-class PCA9536D: public Component, public i2c::I2CDevice {
- public:
-  void setup() override;
-  float get_setup_priority() const { return setup_priority::IO; }
-  void dump_config() override;
-
-  bool digital_read(uint8_t pin);
-  void digital_write(uint8_t pin, bool value);
-  void set_pin_mode(uint8_t pin, uint8_t mode);
-
- protected:
-  bool read_gpio_();
-  bool write_gpio_();
-  bool set_modes_();
-
-  // pin modes - 0 means output, 1 means input
-  uint8_t modes_{0xff};
-  uint8_t outputs_{0x00};
-  uint8_t inputs_{0x00};
-};
-
-class PCA9536DGPIOPin : public GPIOPin {
- public:
-  void setup() override;
-  void pin_mode(gpio::Flags flags) override;
-  bool digital_read() override;
-  void digital_write(bool value) override;
-  std::string dump_summary() const override;
-
-  void set_parent(PCA9536D *parent) { parent_ = parent; }
-  void set_pin(uint8_t pin) { pin_ = pin; }
-  void set_inverted(bool inverted) { inverted_ = inverted; }
-  void set_flags(gpio::Flags flags) { flags_ = flags; }
-
- protected:
-  PCA9536D *parent_;
-  uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
-};
-
-}  // namespace pca9536d
-}  // namespace esphome

components/pca9554_2/__init__.py

@@ -1,57 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import i2c
-from esphome.const import CONF_ID, CONF_NUMBER, CONF_MODE, CONF_INVERTED
-
-DEPENDENCIES = ['i2c']
-MULTI_CONF = True
-
-pca9554_ns = cg.esphome_ns.namespace('pca9554')
-PCA9554GPIOMode = pca9554_ns.enum('PCA9554GPIOMode')
-PCF8674_GPIO_MODES = {
-    'INPUT': PCA9554GPIOMode.PCA9554_INPUT,
-    'OUTPUT': PCA9554GPIOMode.PCA9554_OUTPUT,
-}
-
-PCA9554Component = pca9554_ns.class_('PCA9554Component', cg.Component, i2c.I2CDevice)
-PCA9554GPIOPin = pca9554_ns.class_('PCA9554GPIOPin', cg.GPIOPin)
-
-CONF_PCA9554 = 'pca9554'
-CONF_PCF8575 = 'pcf8575'
-CONFIG_SCHEMA = cv.Schema({
-    cv.Required(CONF_ID): cv.declare_id(PCA9554Component),
-    cv.Optional(CONF_PCF8575, default=False): cv.boolean,
-}).extend(cv.COMPONENT_SCHEMA).extend(i2c.i2c_device_schema(0x20))
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)
-    cg.add(var.set_pcf8575(config[CONF_PCF8575]))
-
-
-def validate_pca9554_gpio_mode(value):
-    value = cv.string(value)
-    return cv.enum(PCF8674_GPIO_MODES, upper=True)(value)
-
-
-PCA9554_OUTPUT_PIN_SCHEMA = cv.Schema({
-    cv.Required(CONF_PCA9554): cv.use_id(PCA9554Component),
-    cv.Required(CONF_NUMBER): cv.int_,
-    cv.Optional(CONF_MODE, default="OUTPUT"): validate_pca9554_gpio_mode,
-    cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-})
-PCA9554_INPUT_PIN_SCHEMA = cv.Schema({
-    cv.Required(CONF_PCA9554): cv.use_id(PCA9554Component),
-    cv.Required(CONF_NUMBER): cv.int_,
-    cv.Optional(CONF_MODE, default="INPUT"): validate_pca9554_gpio_mode,
-    cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-})
-
-
-@pins.PIN_SCHEMA_REGISTRY.register('pca9554', (PCA9554_OUTPUT_PIN_SCHEMA, PCA9554_INPUT_PIN_SCHEMA))
-def pca9554_pin_to_code(config):
-    parent = yield cg.get_variable(config[CONF_PCA9554])
-    yield PCA9554GPIOPin.new(parent, config[CONF_NUMBER], config[CONF_MODE], config[CONF_INVERTED])

components/pca9554_2/pca9554.cpp

@@ -1,96 +0,0 @@
-#include "pca9554.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace pca9554 {
-
-static const char *TAG = "pca9554";
-
-void PCA9554Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCA9554...");
-  if (!this->read_gpio_()) {
-    ESP_LOGE(TAG, "PCA9554 not available under 0x%02X", this->address_);
-    this->mark_failed();
-    return;
-  }
-
-  this->write_gpio_();
-  this->read_gpio_();
-}
-void PCA9554Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "PCA9554:");
-  LOG_I2C_DEVICE(this)
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with PCA9554 failed!");
-  }
-}
-bool PCA9554Component::digital_read(uint8_t pin) {
-  this->read_gpio_();
-  return this->input_mask_ & (1 << pin);
-}
-void PCA9554Component::digital_write(uint8_t pin, bool value) {
-  if (value) {
-    this->output_mask_ |= (1 << pin);
-  } else {
-    this->output_mask_ &= ~(1 << pin);
-  }
-
-  this->write_gpio_();
-}
-void PCA9554Component::pin_mode(uint8_t pin, uint8_t mode) {
-  switch (mode) {
-    case PCA9554_OUTPUT:
-      // Clear mode mask bit
-      this->mode_mask_ &= ~(1 << pin);
-      // Write GPIO to enable input mode
-      this->write_gpio_();
-      break;
-    case PCA9554_INPUT:
-      // Set mode mask bit
-      this->mode_mask_ |= 1 << pin;
-      break;
-    default:
-      break;
-  }
-}
-bool PCA9554Component::read_gpio_() {
-  if (this->is_failed())
-    return false;
-  bool success;
-  uint8_t data[2];
-
-  if (!success) {
-    this->status_set_warning();
-    return false;
-  }
-  this->status_clear_warning();
-  return true;
-}
-bool PCA9554Component::write_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint16_t value = 0;
-  // Pins in OUTPUT mode and where pin is HIGH.
-  value |= this->mode_mask_ & this->output_mask_;
-  // Pins in INPUT mode must also be set here
-  value |= ~this->mode_mask_;
-
-  uint8_t data[2];
-  data[0] = value;
-  data[1] = value >> 8;
-
-  this->status_clear_warning();
-  return true;
-}
-float PCA9554Component::get_setup_priority() const { return setup_priority::IO; }
-
-void PCA9554GPIOPin::setup() { this->pin_mode(this->mode_); }
-bool PCA9554GPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
-void PCA9554GPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
-void PCA9554GPIOPin::pin_mode(uint8_t mode) { this->parent_->pin_mode(this->pin_, mode); }
-PCA9554GPIOPin::PCA9554GPIOPin(PCA9554Component *parent, uint8_t pin, uint8_t mode, bool inverted)
-    : GPIOPin(pin, mode, inverted), parent_(parent) {}
-
-}  // namespace pca9554
-}  // namespace esphome

components/pca9554_2/pca9554.h

@@ -1,61 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/core/esphal.h"
-#include "esphome/components/i2c/i2c.h"
-
-namespace esphome {
-namespace pca9554 {
-
-/// Modes for PCA9554 pins
-enum PCA9554GPIOMode : uint8_t {
-  PCA9554_INPUT = INPUT,
-  PCA9554_OUTPUT = OUTPUT,
-};
-
-class PCA9554Component : public Component, public i2c::I2CDevice {
- public:
-  PCA9554Component() = default;
-
-  /// Check i2c availability and setup masks
-  void setup() override;
-  /// Helper function to read the value of a pin.
-  bool digital_read(uint8_t pin);
-  /// Helper function to write the value of a pin.
-  void digital_write(uint8_t pin, bool value);
-  /// Helper function to set the pin mode of a pin.
-  void pin_mode(uint8_t pin, uint8_t mode);
-
-  float get_setup_priority() const override;
-
-  void dump_config() override;
-
- protected:
-  bool read_gpio_();
-
-  bool write_gpio_();
-
-  /// Mask for the pin mode - 1 means input, 0 means output
-  uint16_t mode_mask_{0x00};
-  /// The mask to write as output state - 1 means HIGH, 0 means LOW
-  uint16_t output_mask_{0x00};
-  /// The state read in read_gpio_ - 1 means HIGH, 0 means LOW
-  uint16_t input_mask_{0x00};
-};
-
-/// Helper class to expose a PCA9554 pin as an internal input GPIO pin.
-class PCA9554GPIOPin : public GPIOPin {
- public:
-  PCA9554GPIOPin(PCA9554Component *parent, uint8_t pin, uint8_t mode, bool inverted = false);
-
-  void setup() override;
-  void pin_mode(uint8_t mode) override;
-  bool digital_read() override;
-  void digital_write(bool value) override;
-
- protected:
-  PCA9554Component *parent_;
-};
-
-}  // namespace pca9554
-}  // namespace esphome

components/st7735/__init__.py

@@ -1,3 +0,0 @@
-import esphome.codegen as cg
-
-st7735_ns = cg.esphome_ns.namespace('st7735')

components/st7735/display.py

@@ -1,41 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import display, spi
-from esphome.const import CONF_ID, CONF_LAMBDA
-from esphome.const import CONF_DC_PIN, CONF_CS_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
-from esphome.const import CONF_EXTERNAL_VCC, CONF_LAMBDA, CONF_MODEL, CONF_RESET_PIN, \
-    CONF_BRIGHTNESS
-from . import st7735_ns
-
-DEPENDENCIES = ['spi']
-
-ST7735 = st7735_ns.class_('ST7735', cg.PollingComponent, spi.SPIDevice)
-ST7735Ref = ST7735.operator('ref')
-
-CONFIG_SCHEMA = display.FULL_DISPLAY_SCHEMA.extend({
-    cv.GenerateID(): cv.declare_id(ST7735),
-    cv.Required(CONF_RESET_PIN): pins.gpio_output_pin_schema,
-    cv.Required(CONF_DC_PIN): pins.gpio_output_pin_schema,
-    cv.Required(CONF_CS_PIN): pins.gpio_output_pin_schema,
-    cv.Optional(CONF_BRIGHTNESS, default=1.0): cv.percentage,
-}).extend(cv.polling_component_schema('1s')).extend(spi.spi_device_schema())
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield spi.register_spi_device(var, config)
-
-    dc = yield cg.gpio_pin_expression(config[CONF_DC_PIN])
-    cg.add(var.set_dc_pin(dc))
-
-    reset = yield cg.gpio_pin_expression(config[CONF_RESET_PIN])
-    cg.add(var.set_reset_pin(reset))
-
-    if CONF_LAMBDA in config:
-        lambda_ = yield cg.process_lambda(
-            config[CONF_LAMBDA], [(display.DisplayBufferRef, 'it')], return_type=cg.void)
-        cg.add(var.set_writer(lambda_))
-
-    yield display.register_display(var, config)

components/st7735/st7735.cpp

@@ -1,351 +0,0 @@
-#include "st7735.h"
-#include "esphome/core/log.h"
-#include "esphome/components/display/display_buffer.h"
-
-namespace esphome {
-namespace st7735 {
-
-#define ST_CMD_DELAY      0x80    // special signifier for command lists
-
-#define ST77XX_NOP        0x00
-#define ST77XX_SWRESET    0x01
-#define ST77XX_RDDID      0x04
-#define ST77XX_RDDST      0x09
-
-#define ST77XX_SLPIN      0x10
-#define ST77XX_SLPOUT     0x11
-#define ST77XX_PTLON      0x12
-#define ST77XX_NORON      0x13
-
-#define ST77XX_INVOFF     0x20
-#define ST77XX_INVON      0x21
-#define ST77XX_DISPOFF    0x28
-#define ST77XX_DISPON     0x29
-#define ST77XX_CASET      0x2A
-#define ST77XX_RASET      0x2B
-#define ST77XX_RAMWR      0x2C
-#define ST77XX_RAMRD      0x2E
-
-#define ST77XX_PTLAR      0x30
-#define ST77XX_TEOFF      0x34
-#define ST77XX_TEON       0x35
-#define ST77XX_MADCTL     0x36
-#define ST77XX_COLMOD     0x3A
-
-#define ST77XX_MADCTL_MY  0x80
-#define ST77XX_MADCTL_MX  0x40
-#define ST77XX_MADCTL_MV  0x20
-#define ST77XX_MADCTL_ML  0x10
-#define ST77XX_MADCTL_RGB 0x00
-
-#define ST77XX_RDID1      0xDA
-#define ST77XX_RDID2      0xDB
-#define ST77XX_RDID3      0xDC
-#define ST77XX_RDID4      0xDD
-
-
-// some flags for initR() :(
-#define INITR_GREENTAB    0x00
-#define INITR_REDTAB      0x01
-#define INITR_BLACKTAB    0x02
-#define INITR_18GREENTAB  INITR_GREENTAB
-#define INITR_18REDTAB    INITR_REDTAB
-#define INITR_18BLACKTAB  INITR_BLACKTAB
-#define INITR_144GREENTAB 0x01
-#define INITR_MINI160x80  0x04
-#define INITR_HALLOWING   0x05
-
-// Some register settings
-#define ST7735_MADCTL_BGR 0x08
-#define ST7735_MADCTL_MH  0x04
-
-#define ST7735_FRMCTR1    0xB1
-#define ST7735_FRMCTR2    0xB2
-#define ST7735_FRMCTR3    0xB3
-#define ST7735_INVCTR     0xB4
-#define ST7735_DISSET5    0xB6
-
-#define ST7735_PWCTR1     0xC0
-#define ST7735_PWCTR2     0xC1
-#define ST7735_PWCTR3     0xC2
-#define ST7735_PWCTR4     0xC3
-#define ST7735_PWCTR5     0xC4
-#define ST7735_VMCTR1     0xC5
-
-#define ST7735_PWCTR6     0xFC
-
-#define ST7735_GMCTRP1    0xE0
-#define ST7735_GMCTRN1    0xE1
-
-static const uint8_t PROGMEM
-    Rcmd1[] = {                       // 7735R init, part 1 (red or green tab)
-        15,                             // 15 commands in list:
-        ST77XX_SWRESET,   ST_CMD_DELAY, //  1: Software reset, 0 args, w/delay
-        150,                          //     150 ms delay
-        ST77XX_SLPOUT,    ST_CMD_DELAY, //  2: Out of sleep mode, 0 args, w/delay
-        255,                          //     500 ms delay
-        ST7735_FRMCTR1, 3,              //  3: Framerate ctrl - normal mode, 3 arg:
-        0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
-        ST7735_FRMCTR2, 3,              //  4: Framerate ctrl - idle mode, 3 args:
-        0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
-        ST7735_FRMCTR3, 6,              //  5: Framerate - partial mode, 6 args:
-        0x01, 0x2C, 0x2D,             //     Dot inversion mode
-        0x01, 0x2C, 0x2D,             //     Line inversion mode
-        ST7735_INVCTR,  1,              //  6: Display inversion ctrl, 1 arg:
-        0x07,                         //     No inversion
-        ST7735_PWCTR1,  3,              //  7: Power control, 3 args, no delay:
-        0xA2,
-        0x02,                         //     -4.6V
-        0x84,                         //     AUTO mode
-        ST7735_PWCTR2,  1,              //  8: Power control, 1 arg, no delay:
-        0xC5,                         //     VGH25=2.4C VGSEL=-10 VGH=3 * AVDD
-        ST7735_PWCTR3,  2,              //  9: Power control, 2 args, no delay:
-        0x0A,                         //     Opamp current small
-        0x00,                         //     Boost frequency
-        ST7735_PWCTR4,  2,              // 10: Power control, 2 args, no delay:
-        0x8A,                         //     BCLK/2,
-        0x2A,                         //     opamp current small & medium low
-        ST7735_PWCTR5,  2,              // 11: Power control, 2 args, no delay:
-        0x8A, 0xEE,
-        ST7735_VMCTR1,  1,              // 12: Power control, 1 arg, no delay:
-        0x0E,
-        ST77XX_INVOFF,  0,              // 13: Don't invert display, no args
-        ST77XX_MADCTL,  1,              // 14: Mem access ctl (directions), 1 arg:
-        0xC8,                         //     row/col addr, bottom-top refresh
-        ST77XX_COLMOD,  1,              // 15: set color mode, 1 arg, no delay:
-        0x05 },                       //     16-bit color
-
-    Rcmd2green[] = {                  // 7735R init, part 2 (green tab only)
-        2,                              //  2 commands in list:
-        ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
-        0x00, 0x02,                   //     XSTART = 0
-        0x00, 0x7F+0x02,              //     XEND = 127
-        ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
-        0x00, 0x01,                   //     XSTART = 0
-        0x00, 0x9F+0x01 },            //     XEND = 159
-    Rcmd2green144[] = {               // 7735R init, part 2 (green 1.44 tab)
-        2,                              //  2 commands in list:
-        ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
-        0x00, 0x00,                   //     XSTART = 0
-        0x00, 0x7F,                   //     XEND = 127
-        ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
-        0x00, 0x00,                   //     XSTART = 0
-        0x00, 0x7F },                 //     XEND = 127
-    Rcmd3[] = {                       // 7735R init, part 3 (red or green tab)
-        4,                              //  4 commands in list:
-        ST7735_GMCTRP1, 16      ,       //  1: Gamma Adjustments (pos. polarity), 16 args + delay:
-        0x02, 0x1c, 0x07, 0x12,       //     (Not entirely necessary, but provides
-        0x37, 0x32, 0x29, 0x2d,       //      accurate colors)
-        0x29, 0x25, 0x2B, 0x39,
-        0x00, 0x01, 0x03, 0x10,
-        ST7735_GMCTRN1, 16      ,       //  2: Gamma Adjustments (neg. polarity), 16 args + delay:
-        0x03, 0x1d, 0x07, 0x06,       //     (Not entirely necessary, but provides
-        0x2E, 0x2C, 0x29, 0x2D,       //      accurate colors)
-        0x2E, 0x2E, 0x37, 0x3F,
-        0x00, 0x00, 0x02, 0x10,
-        ST77XX_NORON,     ST_CMD_DELAY, //  3: Normal display on, no args, w/delay
-        10,                           //     10 ms delay
-        ST77XX_DISPON,    ST_CMD_DELAY, //  4: Main screen turn on, no args w/delay
-        100 };                        //     100 ms delay        
-
-static const char *TAG = "st7735";
-
-void ST7735::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up SPI ST7735...");
-  this->spi_setup();
-  this->dc_pin_->setup();  // OUTPUT
-
-  this->init_reset_();
-  
-  this->displayInit(Rcmd1);
-  this->displayInit(Rcmd2green);
-  this->displayInit(Rcmd3);
-  this->writecommand(ST7735_INVON);
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-  //this->disable();
-  delay(120);
-  //this->enable();
-
-  this->writecommand(ST7735_DISPON);    //Display on
-  delay(120);
-  
-  this->init_internal_(this->get_buffer_length_());
-  memset(this->buffer_, 0x00, this->get_buffer_length_());
-}
-
-void ST7735::write_display_data() {
-  
-  uint16_t offsetx = 26; 
-  uint16_t offsety = 1; 
-
-  uint16_t x1 = offsetx;
-  uint16_t x2 = x1 + get_width_internal()-1;
-  uint16_t y1 = offsety;
-  uint16_t y2 = y1 + get_height_internal()-1;
-	
-	this->enable();
-
-	// set column(x) address
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_CASET);
-	this->dc_pin_->digital_write(true);
-	this->spi_master_write_addr(x1, x2);
-	
-	// set Page(y) address
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_RASET);
-	this->dc_pin_->digital_write(true);
-	this->spi_master_write_addr(y1, y2);
-
-	//  Memory Write
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_RAMWR);
-	this->dc_pin_->digital_write(true);
-
-	this->write_array(this->buffer_, this->get_buffer_length_());
-
-	this->disable();
-}
-
-void ST7735::spi_master_write_addr(uint16_t addr1, uint16_t addr2)
-{
-	static uint8_t Byte[4];
-	Byte[0] = (addr1 >> 8) & 0xFF;
-	Byte[1] = addr1 & 0xFF;
-	Byte[2] = (addr2 >> 8) & 0xFF;
-	Byte[3] = addr2 & 0xFF;
-
-	
-	this->dc_pin_->digital_write(true);
-	this->write_array(Byte, 4);
-	
-}
-
-void ST7735::spi_master_write_color(uint16_t color, uint16_t size)
-{
-	static uint8_t Byte[1024];
-	int index = 0;
-	for(int i=0;i<size;i++) {
-		Byte[index++] = (color >> 8) & 0xFF;
-		Byte[index++] = color & 0xFF;
-	}
-
-	this->dc_pin_->digital_write(true);
-	return write_array(Byte, size*2);
-
-}
-
-
-void ST7735::dump_config() {
-  LOG_DISPLAY("", "SPI ST7735", this);
-  LOG_PIN("  CS Pin: ", this->cs_);
-  LOG_PIN("  DC Pin: ", this->dc_pin_);
-  LOG_PIN("  Reset Pin: ", this->reset_pin_);
-  LOG_UPDATE_INTERVAL(this);
-}
-
-float ST7735::get_setup_priority() const { 
-	return setup_priority::PROCESSOR; 
-}
-
-void ST7735::update() {
-  this->do_update_();
-  this->write_display_data();
-}
-
-void ST7735::loop() {
-
-}
-
-int ST7735::get_width_internal() {
-	return 80;
-}
-
-int ST7735::get_height_internal() {
-	return 160;
-}
-
-size_t ST7735::get_buffer_length_() {
-  return size_t(this->get_width_internal()) * size_t(this->get_height_internal()) * 2;
-}
-
-void HOT ST7735::draw_absolute_pixel_internal(int x, int y, Color color) {
-  if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0)
-    return;
-  const uint32_t color565 = color.to_rgb_565();
-  // where should the bits go in the big buffer array? math...
-  uint16_t pos = (x + y * this->get_width_internal()) * 2;
-  this->buffer_[pos++] = (color565 >> 8) & 0xff;
-  this->buffer_[pos] = color565 & 0xff;
-}
-
-void ST7735::displayInit(const uint8_t *addr) {
-
-  uint8_t  numCommands, cmd, numArgs;
-  uint16_t ms;
-
-  numCommands = pgm_read_byte(addr++);   // Number of commands to follow
-  while(numCommands--) {                 // For each command...
-    cmd = pgm_read_byte(addr++);         // Read command
-    numArgs  = pgm_read_byte(addr++);    // Number of args to follow
-    ms       = numArgs & ST_CMD_DELAY;   // If hibit set, delay follows args
-    numArgs &= ~ST_CMD_DELAY;            // Mask out delay bit
-    this->sendcommand(cmd, addr, numArgs);
-    addr += numArgs;
-
-    if(ms) {
-      ms = pgm_read_byte(addr++); // Read post-command delay time (ms)
-      if(ms == 255) ms = 500;     // If 255, delay for 500 ms
-      delay(ms);
-    }
-  }
-}
-
-void ST7735::init_reset_() {
-  if (this->reset_pin_ != nullptr) {
-    this->reset_pin_->setup();
-    this->reset_pin_->digital_write(true);
-    delay(1);
-    // Trigger Reset
-    this->reset_pin_->digital_write(false);
-    delay(10);
-    // Wake up
-    this->reset_pin_->digital_write(true);
-  }
-}
-
-void ST7735::writecommand(uint8_t value) {
-  this->enable();
-  this->dc_pin_->digital_write(false);
-  this->write_byte(value);
-  this->dc_pin_->digital_write(true);
-  this->disable();
-}
-
-void ST7735::writedata(uint8_t value) {
-  this->dc_pin_->digital_write(true);
-  this->enable();
-  this->write_byte(value);
-  this->disable();
-}
-
-void ST7735::sendcommand(uint8_t cmd, const uint8_t* dataBytes, uint8_t numDataBytes) { 
-  this->writecommand(cmd);
-  this->senddata(dataBytes,numDataBytes);
-}
-
-void ST7735::senddata(const uint8_t* dataBytes, uint8_t numDataBytes) {
-  this->dc_pin_->digital_write(true); //pull DC high to indicate data
-  this->cs_->digital_write(false);
-  this->enable();
-  for (uint8_t i=0; i<numDataBytes; i++) {
-    this->transfer_byte(pgm_read_byte(dataBytes++));  //write byte - SPI library
-  }
-  this->cs_->digital_write(true);
-  this->disable();
-
-}
-
-}  // namespace st7735
-}  // namespace esphome

components/st7735/st7735.h

@@ -1,149 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/spi/spi.h"
-#include "esphome/components/display/display_buffer.h"
-
-// ST7735 specific commands used in init
-#define ST7735_NOP			0x00
-#define ST7735_SWRESET		0x01
-#define ST7735_RDDID		0x04
-#define ST7735_RDDST		0x09
-
-#define ST7735_RDDPM		0x0A      // Read display power mode
-#define ST7735_RDD_MADCTL	0x0B      // Read display MADCTL
-#define ST7735_RDD_COLMOD	0x0C      // Read display pixel format
-#define ST7735_RDDIM		0x0D      // Read display image mode
-#define ST7735_RDDSM		0x0E      // Read display signal mode
-#define ST7735_RDDSR		0x0F      // Read display self-diagnostic result (ST7735)
-
-#define ST7735_SLPIN		0x10
-#define ST7735_SLPOUT		0x11
-#define ST7735_PTLON		0x12
-#define ST7735_NORON		0x13
-
-#define ST7735_INVOFF		0x20
-#define ST7735_INVON		0x21
-#define ST7735_GAMSET		0x26      // Gamma set
-#define ST7735_DISPOFF		0x28
-#define ST7735_DISPON		0x29
-#define ST7735_CASET		0x2A
-#define ST7735_RASET		0x2B
-#define ST7735_RAMWR		0x2C
-#define ST7735_RGBSET		0x2D      // Color setting for 4096, 64K and 262K colors
-#define ST7735_RAMRD		0x2E
-
-#define ST7735_PTLAR		0x30
-#define ST7735_VSCRDEF		0x33      // Vertical scrolling definition (ST7735)
-#define ST7735_TEOFF		0x34      // Tearing effect line off
-#define ST7735_TEON			0x35      // Tearing effect line on
-#define ST7735_MADCTL		0x36      // Memory data access control
-#define ST7735_IDMOFF		0x38      // Idle mode off
-#define ST7735_IDMON		0x39      // Idle mode on
-#define ST7735_RAMWRC		0x3C      // Memory write continue (ST7735)
-#define ST7735_RAMRDC		0x3E      // Memory read continue (ST7735)
-#define ST7735_COLMOD		0x3A
-
-#define ST7735_RAMCTRL		0xB0      // RAM control
-#define ST7735_RGBCTRL		0xB1      // RGB control
-#define ST7735_PORCTRL		0xB2      // Porch control
-#define ST7735_FRCTRL1		0xB3      // Frame rate control
-#define ST7735_PARCTRL		0xB5      // Partial mode control
-#define ST7735_GCTRL		0xB7      // Gate control
-#define ST7735_GTADJ		0xB8      // Gate on timing adjustment
-#define ST7735_DGMEN		0xBA      // Digital gamma enable
-#define ST7735_VCOMS		0xBB      // VCOMS setting
-#define ST7735_LCMCTRL		0xC0      // LCM control
-#define ST7735_IDSET		0xC1      // ID setting
-#define ST7735_VDVVRHEN		0xC2      // VDV and VRH command enable
-#define ST7735_VRHS			0xC3      // VRH set
-#define ST7735_VDVSET		0xC4      // VDV setting
-#define ST7735_VCMOFSET		0xC5      // VCOMS offset set
-#define ST7735_FRCTR2		0xC6      // FR Control 2
-#define ST7735_CABCCTRL		0xC7      // CABC control
-#define ST7735_REGSEL1		0xC8      // Register value section 1
-#define ST7735_REGSEL2		0xCA      // Register value section 2
-#define ST7735_PWMFRSEL		0xCC      // PWM frequency selection
-#define ST7735_PWCTRL1		0xD0      // Power control 1
-#define ST7735_VAPVANEN		0xD2      // Enable VAP/VAN signal output
-#define ST7735_CMD2EN		0xDF      // Command 2 enable
-#define ST7735_PVGAMCTRL	0xE0      // Positive voltage gamma control
-#define ST7735_NVGAMCTRL	0xE1      // Negative voltage gamma control
-#define ST7735_DGMLUTR		0xE2      // Digital gamma look-up table for red
-#define ST7735_DGMLUTB		0xE3      // Digital gamma look-up table for blue
-#define ST7735_GATECTRL		0xE4      // Gate control
-#define ST7735_SPI2EN		0xE7      // SPI2 enable
-#define ST7735_PWCTRL2		0xE8      // Power control 2
-#define ST7735_EQCTRL		0xE9      // Equalize time control
-#define ST7735_PROMCTRL		0xEC      // Program control
-#define ST7735_PROMEN		0xFA      // Program mode enable
-#define ST7735_NVMSET		0xFC      // NVM setting
-#define ST7735_PROMACT		0xFE      // Program action
-
-// Some ready-made 16-bit ('565') color settings:
-#define ST77XX_BLACK      0x0000
-#define ST77XX_WHITE      0xFFFF
-#define ST77XX_RED        0xF800
-#define ST77XX_GREEN      0x07E0
-#define ST77XX_BLUE       0x001F
-#define ST77XX_CYAN       0x07FF
-#define ST77XX_MAGENTA    0xF81F
-#define ST77XX_YELLOW     0xFFE0
-#define ST77XX_ORANGE     0xFC00
-
-// Some ready-made 16-bit ('565') color settings:
-#define ST7735_BLACK      ST77XX_BLACK
-#define ST7735_WHITE      ST77XX_WHITE
-#define ST7735_RED        ST77XX_RED
-#define ST7735_GREEN      ST77XX_GREEN
-#define ST7735_BLUE       ST77XX_BLUE
-#define ST7735_CYAN       ST77XX_CYAN
-#define ST7735_MAGENTA    ST77XX_MAGENTA
-#define ST7735_YELLOW     ST77XX_YELLOW
-#define ST7735_ORANGE     ST77XX_ORANGE
-
-namespace esphome {
-namespace st7735 {
-
-class ST7735 : public PollingComponent, public display::DisplayBuffer, 
-                 public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH, spi::CLOCK_PHASE_TRAILING,
-                                         spi::DATA_RATE_8MHZ> {
- public:
-  void set_dc_pin(GPIOPin *dc_pin) { this->dc_pin_ = dc_pin; }
-  void set_reset_pin(GPIOPin *reset_pin) { this->reset_pin_ = reset_pin; }
-  
-  // ========== INTERNAL METHODS ==========
-  // (In most use cases you won't need these)
-  void setup() override;
-  void dump_config() override;
-  float get_setup_priority() const override;
-  void update() override;
-  void loop() override;
-  
-  void write_display_data();
-  
- protected:
-  GPIOPin *dc_pin_;
-  GPIOPin *reset_pin_{nullptr};
-  
-  void displayInit(const uint8_t *addr);
-  void sendcommand(uint8_t cmd, const uint8_t* dataBytes, uint8_t numDataBytes);
-  void senddata(const uint8_t* dataBytes, uint8_t numDataBytes);
-
-  void init_reset_();
-  void writecommand(uint8_t value);
-  void writedata(uint8_t value);
-  
-  void spi_master_write_addr(uint16_t addr1, uint16_t addr2);
-  void spi_master_write_color(uint16_t color, uint16_t size);
-  
-  void draw_absolute_pixel_internal(int x, int y, Color color) override;
-
-  int get_height_internal() override;
-  int get_width_internal() override;
-  size_t get_buffer_length_();
-};
-
-
-}  // namespace st7735
-}  // namespace esphome

mcu-air-office-r.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: air-office-r
   name: Office R Air
@@ -10,7 +11,7 @@ esphome:
   friendly_name: ${name}
   area: ${area}
   comment: ${comment}
-  
+
 esp32:
   variant: esp32
   framework:
@@ -18,7 +19,7 @@ esp32:
 
 packages:
   common: !include common/common.yaml
-  
+
 i2c:
   # - id: i2c0
   sda: 32
@@ -104,9 +105,9 @@ light:
           move_interval: 100ms
 
 sensor:
-# https://blissair.com/what-is-pm-2-5.htm
+  # https://blissair.com/what-is-pm-2-5.htm
   - platform: pm1006
     uart_id: particle_uart
     update_interval: 20s
     pm_2_5:
-      name: Particulate Matter 2.5µm Concentration
+      name: Particulate Matter 2.5µm Concentration

mcu-atoms3.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: atoms3
   name: AtomS3
@@ -16,7 +17,7 @@ esphome:
   #           id(display_tft).enable();
   #           id(display_tft).transfer_byte(0x11);
   #           id(display_tft).disable();
-  
+
 esp32:
   variant: esp32s3
   flash_size: 8MB
@@ -32,18 +33,18 @@ pcf8574:
     pcf8575: true
 
 animation:
-  - file: "blinky.gif"
+  - file: "assets/images/blinky.gif"
     id: blinky
     resize: 128x128
     type: RGB565
-  - file: "vault_boy_walking.gif"
+  - file: "assets/images/vault_boy_walking.gif"
     id: vaultboy
     resize: 168x121
     type: RGB565
 
 logger:
   logs:
-    component: ERROR 
+    component: ERROR
 
 web_server:
   port: 80
@@ -118,36 +119,36 @@ canbus:
     bit_rate: 1000KBPS
     use_extended_id: true
     on_frame:
-    - can_id: 0x123
+      - can_id: 0x123
-      use_extended_id: true
+        use_extended_id: true
-      then:
+        then:
-      - lambda: |-
+        - lambda: |-
-          std::string b(x.begin(), x.end());
+            std::string b(x.begin(), x.end());
-          ESP_LOGD("can extended id 0x123", "%s", &b[0] );
+            ESP_LOGD("can extended id 0x123", "%s", &b[0] );
-    - can_id: 0x123
+      - can_id: 0x123
-      then:
+        then:
-      - lambda: |-
+        - lambda: |-
-          std::string b(x.begin(), x.end());
+            std::string b(x.begin(), x.end());
-          ESP_LOGD("can standard id 0x123", "%s", &b[0] );
+            ESP_LOGD("can standard id 0x123", "%s", &b[0] );
-    - can_id: 0x3f1
+      - can_id: 0x3f1
-      can_id_mask: 0x7ff
+        can_id_mask: 0x7ff
-      use_extended_id: false
+        use_extended_id: false
-      then:
+        then:
-      - lambda: |-
+        - lambda: |-
-          std::string b(x.begin(), x.end());
+            std::string b(x.begin(), x.end());
-          ESP_LOGD("can id 0x03f1", "%s", &b[0] );
+            ESP_LOGD("can id 0x03f1", "%s", &b[0] );
-    - can_id: 0x108
+      - can_id: 0x108
-      use_extended_id: false
+        use_extended_id: false
-      then:
+        then:
-      - lambda: |-
+        - lambda: |-
-          std::string b(x.begin(), x.end());
+            std::string b(x.begin(), x.end());
-          ESP_LOGD("can id 0x108", "%s", &b[0] );
+            ESP_LOGD("can id 0x108", "%s", &b[0] );
-    - can_id: 0x109
+      - can_id: 0x109
-      use_extended_id: false
+        use_extended_id: false
-      then:
+        then:
-      - lambda: |-
+        - lambda: |-
-          std::string b(x.begin(), x.end());
+            std::string b(x.begin(), x.end());
-          ESP_LOGD("can id 0x109", "%s", &b[0] );
+            ESP_LOGD("can id 0x109", "%s", &b[0] );
 
 i2c:
   # - id: i2c_groove
@@ -177,9 +178,9 @@ i2c:
 #   - platform: gpio
 #     pin: 1
 #     id: hub_1
-  # - platform: gpio
+# - platform: gpio
-  #   pin: 2
+#   pin: 2
-  #   id: hub_2
+#   id: hub_2
 
 m5stack_4relay:
   id: m5stack_relay_1
@@ -229,7 +230,7 @@ switch:
       - output.turn_off: motor_in1
       - output.turn_off: motor_in2
 
-# switch:
+  # switch:
   - platform: m5stack_4relay
     name: Relay 1
     id: relay_1
@@ -377,7 +378,7 @@ display:
       id(blinky).next_frame();
       // Draw the animation my_animation at position [x=0,y=0]
       it.image(0, 0, id(blinky), COLOR_ON, COLOR_OFF);
-  
+
       // // it.print(0, 0, id(font_default), "Hello World!");
       // // it.strftime(0, 0, id(font_default), TextAlign::TOP_LEFT, "%H:%M", id(ha_time).now());
       // it.rectangle(0,  0, it.get_width(), it.get_height(), id(my_blue));
@@ -498,4 +499,4 @@ time:
 #   active: true
 
 # esp32_improv:
-#   authorizer: none
+#   authorizer: none

mcu-basement-2.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: basement-2
   name_short: Basement
@@ -16,7 +17,7 @@ esp8266:
 
 packages:
   common: !include common/common_esp8266.yaml
-  
+
 # Sonoff Dual R2
 # GPIO10	Push Button
 # GPIO00	Pin "button 0" on expansion header

mcu-basement.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: basement
   name: Basement
@@ -15,7 +16,7 @@ esp8266:
 
 packages:
   common: !include common/common_esp8266.yaml
-  
+
 # Sonoff Dual R2
 # Pin 	  Function
 # GPIO10	Push Button
@@ -40,35 +41,35 @@ binary_sensor:
     name: Light Switch
     device_class: light
     on_click:
-    - min_length: 50ms
+      - min_length: 50ms
-      max_length: 350ms
+        max_length: 350ms
-      then:
+        then:
-        - homeassistant.service:
+          - homeassistant.service:
-            service: light.toggle
+              service: light.toggle
-            data:
+              data:
-              entity_id: light.mcu_basement_2_light
+                entity_id: light.mcu_basement_2_light
-    - min_length: 351ms
+      - min_length: 351ms
-      max_length: 1000ms
+        max_length: 1000ms
-      then:
+        then:
-        - homeassistant.service:
+          - homeassistant.service:
-            service: light.toggle
+              service: light.toggle
-            data:
+              data:
-              entity_id: light.exercise_room
+                entity_id: light.exercise_room
-    - min_length: 1001ms
+      - min_length: 1001ms
-      max_length: 10000ms
+        max_length: 10000ms
-      then:
+        then:
-        # - homeassistant.service:
+          # - homeassistant.service:
-        #     service: light.turn_off
+          #     service: light.turn_off
-        #     data:
+          #     data:
-        #       entity_id: light.basement_light
+          #       entity_id: light.basement_light
-        - homeassistant.service:
+          - homeassistant.service:
-            service: light.turn_off
+              service: light.turn_off
-            data:
+              data:
-              entity_id: light.exercise_room
+                entity_id: light.exercise_room
-        - homeassistant.service:
+          - homeassistant.service:
-            service: light.turn_off
+              service: light.turn_off
-            data:
+              data:
-              entity_id: light.exercise_room_fan
+                entity_id: light.exercise_room_fan
   - platform: gpio
     pin:
       number: 10
@@ -118,7 +119,7 @@ select:
                 id(blower_auto) = false;
                 id(relay_1).turn_off();
             }
-      
+
 status_led:
   pin:
     number: 13
@@ -136,7 +137,7 @@ switch:
     icon: mdi:power-socket-fr
     pin: 5
     id: relay_2
-    
+
 time:
   - platform: homeassistant
     timezone: Europe/Bratislava

mcu-bedroom-lamp-left.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: bedroom-lamp-left
   name: Bedroom Lamp Left
@@ -95,7 +96,7 @@ script:
                   id: my_light_mode
                   state: white
           then:
-            - front_panel.turn_on_leds: [ POWER, COLOR ]
+            - front_panel.turn_on_leds: [POWER, COLOR]
             - front_panel.set_level: !lambda return id(current_brightness);
       # In night light mode, turn off the front panel illumination, except
       # for the power button.
@@ -105,7 +106,7 @@ script:
                 id: my_light_mode
                 state: night
           then:
-            - front_panel.turn_on_leds: [ POWER ]
+            - front_panel.turn_on_leds: [POWER]
       - front_panel.update_leds:
 
 # If you want to control light presets from Home Assistant, then you can
@@ -201,18 +202,18 @@ light:
     # These bindings have been setup below, using the binary_sensor for
     # the color button.
     presets:
-#      rgb:
+      # rgb:
-#        red:         { red: 100%, green: 0%,   blue: 0%   }
+      # red:         { red: 100%, green: 0%,   blue: 0%   }
-#        green:       { red: 0%,   green: 100%, blue: 0%   }
+      # green:       { red: 0%,   green: 100%, blue: 0%   }
-#        blue:        { red: 0%,   green: 0%,   blue: 100% }
+      # blue:        { red: 0%,   green: 0%,   blue: 100% }
-#        yellow:      { red: 100%, green: 100%, blue: 0%   }
+      # yellow:      { red: 100%, green: 100%, blue: 0%   }
-#        purple:      { red: 100%, green: 0%,   blue: 100% }
+      # purple:      { red: 100%, green: 0%,   blue: 100% }
-#        randomize:   { effect: Fast Random                }
+      # randomize:   { effect: Fast Random                }
       white:
-        cold:        { color_temperature: 153 mireds      }
+        cold:        {color_temperature: 153 mireds}
-        chilly:      { color_temperature: 275 mireds      }
+        chilly:      {color_temperature: 275 mireds}
-        luke:        { color_temperature: 400 mireds      }
+        luke:        {color_temperature: 400 mireds}
-        warm:        { color_temperature: 588 mireds      }
+        warm:        {color_temperature: 588 mireds}
 
 # Binary sensors can be created for handling front panel touch / release
 # events. To specify what part of the front panel to look at, the "for"
@@ -224,16 +225,16 @@ binary_sensor:
     id: my_power_button
     for: POWER_BUTTON
     on_multi_click:
-    - timing:
+      - timing:
-        - ON for at most 0.8s
+          - ON for at most 0.8s
-      then:
+        then:
-        - light.toggle: my_light
+          - light.toggle: my_light
-    - timing:
+      - timing:
-        - ON for at least 0.8s
+          - ON for at least 0.8s
-      then:
+        then:
-        - light.turn_on:
+          - light.turn_on:
-            id: my_light
+              id: my_light
-            brightness: 1%
+              brightness: 1%
 
   # When tapping the color button, activate the next preset.
   # When holding the color button, activate the next preset group.
@@ -241,17 +242,17 @@ binary_sensor:
     id: my_color_button
     for: COLOR_BUTTON
     on_multi_click:
-    - timing:
+      - timing:
-        - ON for at most 0.6s
+          - ON for at most 0.6s
-      then:
+        then:
-        - preset.activate:
+          - preset.activate:
-            next: preset
+              next: preset
-    - timing:
+      - timing:
-        - ON for at least 0.6s
+          - ON for at least 0.6s
-      then:
+        then:
-        - globals.set:
+          - globals.set:
-            id: group_control
+              id: group_control
-            value: !lambda return !id(group_control);
+              value: !lambda return !id(group_control);
 #      - timing:
 #          - ON for at least 0.6s
 #        then:
@@ -271,20 +272,20 @@ sensor:
     id: my_slider_level
     range_from: 0.02
     on_value:
-    - if:
+      - if:
-        condition:
+          condition:
-          lambda: |-
+            lambda: |-
-            return id(group_control);
+              return id(group_control);
-        then:
+          then:
-          - homeassistant.service:
+            - homeassistant.service:
-              service: light.turn_on
+                service: light.turn_on
-              data:
+                data:
-                light_name: bedroom_lamp
+                  light_name: bedroom_lamp
+                  brightness: !lambda return x;
+          else:
+            - light.turn_on:
+                id: my_light
                 brightness: !lambda return x;
-        else:
-          - light.turn_on:
-              id: my_light
-              brightness: !lambda return x;
 
 # This text sensor propagates the currently active light mode.
 # The possible light modes are: "off", "rgb", "white" and "night".
@@ -338,6 +339,6 @@ xiaomi_bslamp2:
     master1: output_master1
     master2: output_master2
   front_panel:
-    i2c: front_panel_i2c 
+    i2c: front_panel_i2c
     address: 0x2C
     trigger_pin: GPIO16

mcu-bedroom-lamp-right.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: bedroom-lamp-right
   name: Bedroom Lamp Right
@@ -92,7 +93,7 @@ script:
                   id: my_light_mode
                   state: white
           then:
-            - front_panel.turn_on_leds: [ POWER, COLOR ]
+            - front_panel.turn_on_leds: [POWER, COLOR]
             - front_panel.set_level: !lambda return id(current_brightness);
       # In night light mode, turn off the front panel illumination, except
       # for the power button.
@@ -102,7 +103,7 @@ script:
                 id: my_light_mode
                 state: night
           then:
-            - front_panel.turn_on_leds: [ POWER ]
+            - front_panel.turn_on_leds: [POWER]
       - front_panel.update_leds:
 
 # If you want to control light presets from Home Assistant, then you can
@@ -198,18 +199,18 @@ light:
     # These bindings have been setup below, using the binary_sensor for
     # the color button.
     presets:
-#      rgb:
+      # rgb:
-#        red:         { red: 100%, green: 0%,   blue: 0%   }
+      # red:         { red: 100%, green: 0%,   blue: 0%   }
-#        green:       { red: 0%,   green: 100%, blue: 0%   }
+      # green:       { red: 0%,   green: 100%, blue: 0%   }
-#        blue:        { red: 0%,   green: 0%,   blue: 100% }
+      # blue:        { red: 0%,   green: 0%,   blue: 100% }
-#        yellow:      { red: 100%, green: 100%, blue: 0%   }
+      # yellow:      { red: 100%, green: 100%, blue: 0%   }
-#        purple:      { red: 100%, green: 0%,   blue: 100% }
+      # purple:      { red: 100%, green: 0%,   blue: 100% }
-#        randomize:   { effect: Fast Random                }
+      # randomize:   { effect: Fast Random                }
       white:
-        cold:        { color_temperature: 153 mireds      }
+        cold:        {color_temperature: 153 mireds}
-        chilly:      { color_temperature: 275 mireds      }
+        chilly:      {color_temperature: 275 mireds}
-        luke:        { color_temperature: 400 mireds      }
+        luke:        {color_temperature: 400 mireds}
-        warm:        { color_temperature: 588 mireds      }
+        warm:        {color_temperature: 588 mireds}
 
 # Binary sensors can be created for handling front panel touch / release
 # events. To specify what part of the front panel to look at, the "for"
@@ -319,6 +320,6 @@ xiaomi_bslamp2:
     master1: output_master1
     master2: output_master2
   front_panel:
-    i2c: front_panel_i2c 
+    i2c: front_panel_i2c
     address: 0x2C
     trigger_pin: GPIO16

mcu-c6-test-1.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: c6-test-1
   name: C6 TEST 1
@@ -46,7 +47,7 @@ esp32:
 logger:
   hardware_uart: USB_SERIAL_JTAG
   logs:
-    component: ERROR 
+    component: ERROR
 
 # web_server:
 #   port: 80
@@ -114,4 +115,4 @@ light:
             state = !state;
 
 packages:
-  common: !include common/common.yaml
+  common: !include common/common.yaml

mcu-c6-test-2.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: c6-test-2
   name: C6 TEST 2
@@ -46,7 +47,7 @@ esp32:
 logger:
   hardware_uart: USB_SERIAL_JTAG
   logs:
-    component: ERROR 
+    component: ERROR
 
 # web_server:
 #   port: 80
@@ -114,4 +115,4 @@ light:
             state = !state;
 
 packages:
-  common: !include common/common.yaml
+  common: !include common/common.yaml

mcu-cam-1.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: cam-1
   name: Cam 1
@@ -52,4 +53,4 @@ switch:
 #   - port: 8080
 #     mode: stream
 #   - port: 8081
-#     mode: snapshot
+#     mode: snapshot

mcu-can-node-1.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: can-node-1
   name: CAN Node 1
@@ -14,8 +15,6 @@ esp32:
   variant: esp32
   framework:
     type: esp-idf
-    # version: 5.4.2
-    # platform_version: 54.03.21
 
 external_components:
   - source: github://mrk-its/esphome-canopen@dev
@@ -25,7 +24,7 @@ external_components:
 
 packages:
   common: !include common/common.yaml
-  
+
 canbus:
   - platform: esp32_can
     id: can_bus

mcu-can-node-2.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: can-node-2
   name: CAN Node 2
@@ -14,8 +15,6 @@ esp32:
   variant: esp32
   framework:
     type: esp-idf
-    version: 5.4.2
-    platform_version: 54.03.21
 
 external_components:
   - source: github://mrk-its/esphome-canopen@dev
@@ -25,7 +24,7 @@ external_components:
 
 packages:
   common: !include common/common.yaml
-  
+
 canbus:
   - platform: esp32_can
     id: can_bus

mcu-cec-bedroom.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: cec-bedroom
   name: Bedroom TV
@@ -52,11 +53,11 @@ uart:
     baud_rate: 9600
 
 sensor:
- - platform: a02yyuw
+  - platform: a02yyuw
-   uart_id: uart_distance
+    uart_id: uart_distance
-   name: 'Distance'
+    name: 'Distance'
-   accuracy_decimals: 2
+    accuracy_decimals: 2
-   unit_of_measurement: cm
+    unit_of_measurement: cm
 
 binary_sensor:
   - platform: gpio
@@ -138,22 +139,22 @@ hdmi_cec:
       then:
         - hdmi_cec.send: # Report ARC started
             destination: 0x0
-            data: [ 0xC1 ]
+            data: [0xC1]
     - opcode: 0x70 # System audio mode request
       then:
         - hdmi_cec.send:
             destination: 0x0
-            data: [ 0x72, 0x01 ]
+            data: [0x72, 0x01]
     - opcode: 0x71 # Give audio status
       then:
         - hdmi_cec.send:
             destination: 0x0
-            data: [ 0x7A, 0x7F ]
+            data: [0x7A, 0x7F]
     - opcode: 0x7D # Give audio system mode status
       then:
         - hdmi_cec.send:
             destination: 0x0
-            data: [ 0x7E, 0x01 ]
+            data: [0x7E, 0x01]
     - opcode: 0x46 # Give OSD name
       then:
         - hdmi_cec.send:

mcu-clock-1.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: clock-1
   name: Clock 1
@@ -126,7 +127,7 @@ display:
         if ((i % 2) == 0)
           it.print("8 8 ");
         else
-          it.print(" 8 8");      
+          it.print(" 8 8");
       } else {
         if (((i / 10) % 2) == 0) {
           //it.set_intensity(7);

mcu-clock-living-room.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: clock-living-room
   name: Living room Clock
@@ -21,7 +22,7 @@ external_components:
       url: https://github.com/trip5/esphome-tm1650
       ref: main
     refresh: 60s
-    components: [ tm1650 ]
+    components: [tm1650]
 
 packages:
   common: !include common/common.yaml
@@ -76,7 +77,7 @@ display:
         if ((i % 2) == 0)
           it.print("8 8 ");
         else
-          it.print(" 8 8");      
+          it.print(" 8 8");
       } else {
         if (((i / 10) % 2) == 0) {
           //it.set_intensity(7);

mcu-desk-lamp.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: desk-lamp
   name: Desk Lamp
@@ -107,7 +108,7 @@ sensor:
 
             // positive rotation
             if (id(rotary).state > 0) {
-              // 
+              //
               if (id(rotary_button).state) {
                 temp -= 5.0f;
               } else {

mcu-dimmer.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: dimmer
   name: Dimmer
@@ -35,7 +36,7 @@ esp32:
   framework:
     type: esp-idf
 
-  
+
 packages:
   common: !include common/common.yaml
 

mcu-echo-1.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: echo-1
   name: Echo 1
@@ -20,18 +21,18 @@ esp32:
     # type: esp-idf
     # version: 5.1.2
     # platform_version: 6.5.0
-    
+
 
 external_components:
   - source: components
-  # - source: 
+  # - source:
   #     type: git
   #     url: https://github.com/nielsnl68/esphome
   #     ref: nvds-RTTTL_I2S
   #   components: [ speaker, rtttl ]
   #   refresh: 0s
   - source: github://pr#5177
-    components: [ rtttl ]
+    components: [rtttl]
     refresh: 0s
 
 packages:
@@ -48,10 +49,10 @@ api:
             rtttl: !lambda 'return song;'
 
 # i2c:
-  # sda: 26
+#   - sda: 26
-  # scl: 32
+#     scl: 32
-#   scan: true #false
+#     scan: true #false
-#   frequency: 100kHz
+#     frequency: 100kHz
 
 # uart:
 #   id: particle_uart
@@ -94,14 +95,14 @@ light:
 #           condition:
 #              lambda: return state > 0;
 #           then:
-#             - light.turn_on: 
+#             - light.turn_on:
 #                 id: neo_buildin
 #                 red: 1.0
 #                 green: 0.0
 #                 blue: 0.0
 #                 brightness: 100%
 #           else:
-#             - light.turn_off: 
+#             - light.turn_off:
 #                 id: neo_buildin
 #                 # green: 0.0
 #                 # red: 0.0
@@ -134,7 +135,7 @@ speaker:
 rtttl:
   id: my_rtttl
   speaker: echo_speaker
-  
+
 microphone:
   - platform: i2s_audio
     id: echo_microphone
@@ -148,4 +149,4 @@ voice_assistant:
     - media_player.play_media:
         id: media_out
         media_url: !lambda |-
-          return x;
+          return x;

mcu-echo.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: echo
   name: Echo
@@ -227,12 +228,12 @@ button:
 # http_request:
 #   useragent: esphome/${device}
 #   timeout: 5s
-  
+
 # # Example configuration entry
 # interval:
 #   - interval: 1min
 #     then:
 #       # - script.execute: say_hello_server
-#       - http_request.get: 
+#       - http_request.get:
 #           url: https://esphome.io
 #           verify_ssl: false

mcu-eworkbench.yaml

@@ -1,8 +1,9 @@
+---
 substitutions:
   device: eworkbench
   name: Electronics Workbench
   comment: "Office R | Electronics Workbench"
-  
+
 esphome:
   name: mcu-${device}
   friendly_name: ${name}
@@ -32,7 +33,7 @@ packages:
 # GPIO7   GPIO
 # GPIO8   GPIO
 # GPIO10   GPIO
-# GPIO18   UART RX 
+# GPIO18   UART RX
 # GPIO19   UART TX
 
 i2c:
@@ -257,7 +258,7 @@ time:
 #         if ((i % 2) == 0)
 #           it.print("8 8 ");
 #         else
-#           it.print(" 8 8");      
+#           it.print(" 8 8");
 #       } else {
 #         if (((i / 10) % 2) == 0) {
 #           //it.set_intensity(7);

mcu-fireplace.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: fireplace
   name: Heating Fireplace

mcu-gate.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: gate
   name: Gate
@@ -14,7 +15,7 @@ esp32:
   variant: esp32
   framework:
     type: esp-idf
-  
+
 packages:
   common: !include common/common.yaml
 
@@ -93,132 +94,46 @@ switch:
     optimistic: true
     restore_mode: RESTORE_DEFAULT_ON
 
-# Bluetooth related stuff
+globals:
+  - id: beacon_count
+    type: int
+    restore_value: no
+    initial_value: '0'
+
 esp32_ble_tracker:
-  id: ${name}_ble_tracker
+  id: ${device}_ble_tracker
   scan_parameters:
     duration: 1min
 
-# bluetooth_proxy:
-
 binary_sensor:
   - platform: ble_presence
     id: ibeacon_auris
     ibeacon_uuid: !secret ble_beacon_toyota_auris_uuid
     name: "Vehicle iBeacon Auris"
     timeout: 2min
-    on_press:
+    on_press: !include {file: common/gate_beacon_open.yaml, vars: {enable_id: enable_auris}}
-      - if:
+    on_release: !include {file: common/gate_beacon_close.yaml, vars: {enable_id: enable_auris}}
-          condition:
-            and:
-              - switch.is_on: enable_auris
-              - switch.is_on: auto_open
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_pcx125
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_open
-    on_release:
-      - if:
-          condition:
-            and:
-              - switch.is_on: enable_auris
-              - switch.is_on: auto_close
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_pcx125
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_close
   - platform: ble_presence
     id: ibeacon_yaris
     ibeacon_uuid: !secret ble_beacon_toyota_yaris_uuid
     name: "Vehicle iBeacon Yaris"
     timeout: 2min
-    on_press:
+    on_press: !include {file: common/gate_beacon_open.yaml, vars: {enable_id: enable_yaris}}
-      - if:
+    on_release: !include {file: common/gate_beacon_close.yaml, vars: {enable_id: enable_yaris}}
-          condition:
-            and:
-              - switch.is_on: enable_yaris
-              - switch.is_on: auto_open
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_pcx125
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_open
-    on_release:
-      - if:
-          condition:
-            and:
-              - switch.is_on: enable_yaris
-              - switch.is_on: auto_close
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_pcx125
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_close
   - platform: ble_presence
     id: ibeacon_pcx125
     ibeacon_uuid: !secret ble_beacon_honda_uuid
     name: "Vehicle iBeacon Honda PCX125"
     timeout: 2min
-    on_press:
+    on_press: !include {file: common/gate_beacon_open.yaml, vars: {enable_id: enable_pcx125}}
-      - if:
+    on_release: !include {file: common/gate_beacon_close.yaml, vars: {enable_id: enable_pcx125}}
-          condition:
-            and:
-              - switch.is_on: enable_pcx125
-              - switch.is_on: auto_open
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_open
-    on_release:
-      - if:
-          condition:
-            and:
-              - switch.is_on: enable_pcx125
-              - switch.is_on: auto_close
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_dl650
-          then: 
-            - button.press: gate_close
   - platform: ble_presence
     id: ibeacon_dl650
     ibeacon_uuid: !secret ble_beacon_suzuki_uuid
     name: "Vehicle iBeacon Suzuki DL650"
     timeout: 2min
-    on_press:
+    on_press: !include {file: common/gate_beacon_open.yaml, vars: {enable_id: enable_dl650}}
-      - if:
+    on_release: !include {file: common/gate_beacon_close.yaml, vars: {enable_id: enable_dl650}}
-          condition:
-            and:
-              - switch.is_on: enable_dl650
-              - switch.is_on: auto_open
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_pcx125
-          then: 
-            - button.press: gate_open
-    on_release:
-      - if:
-          condition:
-            and:
-              - switch.is_on: enable_dl650
-              - switch.is_on: auto_close
-              - binary_sensor.is_off: ibeacon_auris
-              - binary_sensor.is_off: ibeacon_yaris
-              - binary_sensor.is_off: ibeacon_pcx125
-          then: 
-            - button.press: gate_close
-  # - platform: gpio
-  #   id: gate_flash
-  #   pin:
-  #     number: 26
-  #     inverted: true
-  #     mode:
-  #       input: true
-  #   filters:
-  #     - delayed_on: 10ms
   - platform: gpio
     id: gate_ogi
     pin:
@@ -230,53 +145,53 @@ binary_sensor:
       - delayed_on: 10ms
     entity_category: diagnostic
     on_multi_click:
-    - timing:
+      - timing:
-        - OFF for at least 1500ms
+          - OFF for at least 1500ms
-      then:
+        then:
-        - select.set:
+          - select.set:
-            id: gate_state
+              id: gate_state
-            option: Closed
+              option: Closed
-        - logger.log: "OGI OFF => GATE CLOSED"
+          - logger.log: "OGI OFF => GATE CLOSED"
-      invalid_cooldown: 100ms
+        invalid_cooldown: 100ms
-    - timing:
+      - timing:
-        - ON for at least 400ms
+          - ON for at least 400ms
-        - OFF for at least 400ms
+          - OFF for at least 400ms
-        - ON for at least 400ms
+          - ON for at least 400ms
-        - OFF for at least 400ms
+          - OFF for at least 400ms
-      then:
+        then:
-        - select.set:
+          - select.set:
-            id: gate_state
+              id: gate_state
-            option: Opening
+              option: Opening
-        - logger.log: "OGI SLOW BLINK => GATE OPENING"
+          - logger.log: "OGI SLOW BLINK => GATE OPENING"
-      invalid_cooldown: 100ms
+        invalid_cooldown: 100ms
-    - timing:
+      - timing:
-        - ON for at most 300ms
+          - ON for at most 300ms
-        - OFF for at most 300ms
+          - OFF for at most 300ms
-        - ON for at most 300ms
+          - ON for at most 300ms
-        - OFF for at most 300ms
+          - OFF for at most 300ms
-      then:
+        then:
-        - select.set:
+          - select.set:
-            id: gate_state
+              id: gate_state
-            option: Closing
+              option: Closing
-        - logger.log: "OGI FAST BLINK => GATE CLOSING"
+          - logger.log: "OGI FAST BLINK => GATE CLOSING"
-      invalid_cooldown: 100ms
+        invalid_cooldown: 100ms
-    - timing:
+      - timing:
-        - ON for at least 1500ms
+          - ON for at least 1500ms
-      then:
+        then:
-        - select.set:
+          - select.set:
-            id: gate_state
+              id: gate_state
-            option: Open
+              option: Open
-        - logger.log: "OGI ON => GATE OPEN"
+          - logger.log: "OGI ON => GATE OPEN"
-      invalid_cooldown: 100ms
+        invalid_cooldown: 100ms
 
 select:
   - platform: template
     name: State
     id: gate_state
     options:
-     - Open
+      - Open
-     - Closed
+      - Closed
-     - Opening
+      - Opening
-     - Closing
+      - Closing
     initial_option: Closed
     optimistic: true

mcu-gateway.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: gateway
   name: Gateway
@@ -54,11 +55,11 @@ ethernet:
     # Enable LLDP transmission
     #enabled: true
     # Optional: override default port
-    port: "test-port"
+    port: eth
     # Optional: override default system name
-    system_name: "test-system"
+    system_name: mcu-${device}
     # Optional: override default system description
-    system_description: "test-description"
+    system_description: ${comment}
     # Optional: override default "fast mode" burst packet count
     tx_fast_count: 4
     # Optional: override default LLDP frame transmission interval
@@ -73,19 +74,19 @@ ethernet:
 #   clk_mode: GPIO17_OUT
 #   phy_addr: 0
 #   power_pin: 12
-  # use_address: 10.17.240.245
+# use_address: 10.17.240.245
 
-  # # Optional manual IP
+# # Optional manual IP
-  # manual_ip:
+# manual_ip:
-  #   static_ip: 10.17.240.254
+#   static_ip: 10.17.240.254
-  #   gateway: 10.17.240.1
+#   gateway: 10.17.240.1
-  #   subnet: 255.255.255.0
+#   subnet: 255.255.255.0
 
 
 # ethernet:
-  # use_address: 10.17.241.254
+# use_address: 10.17.241.254
-  # use_address: 10.17.241.98
+# use_address: 10.17.241.98
-  # use_address: mcu-gateway.local
+# use_address: mcu-gateway.local
 
 uart:
   id: uart_modbus
@@ -190,17 +191,17 @@ sensor:
     register_count: 2
     filters:
       - calibrate_linear:
-        - 50 -> 0
+          - 50 -> 0
-        - 450 -> 5
+          - 450 -> 5
 
 switch:
-- platform: modbus_controller
+  - platform: modbus_controller
-  modbus_controller_id: modbus_adc_1
+    modbus_controller_id: modbus_adc_1
-  name: Readress MODBUS
+    name: Readress MODBUS
-  register_type: holding
+    register_type: holding
-  address: 0x00FD
+    address: 0x00FD
-  entity_category: config
+    entity_category: config
-  icon: "mdi:toggle-switch"
+    icon: "mdi:toggle-switch"
 
 esp32_ble_tracker:
   scan_parameters:

mcu-heater.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: heater
   name: Heater
@@ -241,22 +242,22 @@ switch:
       number: 5
 # - platform: uart
 #     name: Total Heater Power Reset
-#     uart_id: 
+#     uart_id:
 #     id: reset_total_heater_power
 #     data: [0x01, 0x42, 0x80, 0x11]
 
 sensor:
   # - platform: ds248x
   - platform: dallas_temp
-# [22:06:25][D][dallas.sensor:082]:     0x1701143E35C5AA28  Feed
+    # [22:06:25][D][dallas.sensor:082]:     0x1701143E35C5AA28  Feed
-# [22:06:25][D][dallas.sensor:082]:     0x7301143F7F57AA28  Return
+    # [22:06:25][D][dallas.sensor:082]:     0x7301143F7F57AA28  Return
-# [22:06:25][D][dallas.sensor:082]:     0xF701143E397FAA28  Heater Tank
+    # [22:06:25][D][dallas.sensor:082]:     0xF701143E397FAA28  Heater Tank
-# [22:06:25][D][dallas.sensor:082]:     0x5A041750B2C8FF28  Hot Water Tank - Bottom (Solar)
+    # [22:06:25][D][dallas.sensor:082]:     0x5A041750B2C8FF28  Hot Water Tank - Bottom (Solar)
-# [22:06:25][D][dallas.sensor:082]:     0xDB041750EAE2FF28  Heating Water Return (OUT from System, TO Heater)
+    # [22:06:25][D][dallas.sensor:082]:     0xDB041750EAE2FF28  Heating Water Return (OUT from System, TO Heater)
-# [22:06:25][D][dallas.sensor:082]:     0xB2041750CF1AFF28  Heating Water (OUT from Heater, TO System)
+    # [22:06:25][D][dallas.sensor:082]:     0xB2041750CF1AFF28  Heating Water (OUT from Heater, TO System)
-# [22:06:25][D][dallas.sensor:082]:     0x960417517301FF28  Hot Water Tank - TOP (Heater)
+    # [22:06:25][D][dallas.sensor:082]:     0x960417517301FF28  Hot Water Tank - TOP (Heater)
     # address: 0x320417500A93FF28 # 1. broken
-    # address: 0x67041750F44CFF28 # 2. broken 
+    # address: 0x67041750F44CFF28 # 2. broken
     address: 0x960417517301FF28 # Hot Water Tank - TOP (Heater)
     name: Heater
     id: hot_water_heater
@@ -297,7 +298,7 @@ sensor:
     lambda: |-
       //# platba za odberne miesto        0,75          1,1
       //# pevna mesacna zlozka tarify     0,15080000    0,1508 * 75 A
-      
+
       //## platba za systemove sluzby      0,00629760
       //# platba za prevadzku systemu     0,01590000
       //# variabilna zlozka tarify za distribuciu 0,00398400
@@ -346,7 +347,7 @@ sensor:
       - lambda: return x * (0.001) + 2282;
     unit_of_measurement: kWh
     icon: mdi:counter
-  # L2  
+  # L2
   - platform: pzemac
     address: 162
     current:
@@ -507,4 +508,4 @@ binary_sensor:
         - switch.turn_on: heating_demand
     on_release:
       then:
-        - switch.turn_off: heating_demand
+        - switch.turn_off: heating_demand

mcu-kitchen.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: kitchen
   name: Kitchen

mcu-lightening.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: lightening
   name: Lightening detector
@@ -10,15 +11,12 @@ esphome:
   friendly_name: ${name}
   area: ${area}
   comment: ${comment}
-  
+
 esp32:
   variant: esp32
   framework:
     type: esp-idf
 
-external_components:
-  - source: components
-
 packages:
   common: !include common/common.yaml
 
@@ -38,11 +36,11 @@ as3935_i2c:
   irq_pin: 26
 
 binary_sensor:
-#   - platform: gpio
+  #   - platform: gpio
-#     # name: Button
+  #     # name: Button
-#     pin:
+  #     pin:
-#       number: 39
+  #       number: 39
-#       inverted: true
+  #       inverted: true
   - platform: as3935
     name: Storm Alert
 
@@ -62,4 +60,3 @@ sensor:
       name: Energy
     distance:
       name: Storm Distance
-

mcu-lvgl-eworkbench.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: lvgl-eworkbench
   name: Electronics Workbench Display
@@ -29,13 +30,13 @@ i2c:
 psram:
   mode: octal
   speed: 40MHz
-  
+
 spi:
   id: display_qspi
   type: quad
   clk_pin: 47
   data_pins: [21, 48, 40, 39]
-    
+
 color:
   - id: my_red
     red: 100%

mcu-lvgl-trainer.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: lvgl-trainer
   name: Trainer Display
@@ -28,13 +29,13 @@ i2c:
 psram:
   mode: octal
   speed: 80MHz
-  
+
 spi:
   id: display_qspi
   type: quad
   clk_pin: 47
   data_pins: [21, 48, 40, 39]
-    
+
 color:
   - id: my_red
     red: 100%
@@ -140,9 +141,9 @@ touchscreen:
     display: main_display
     i2c_id: touchscreen_bus
     update_interval: 100ms
-    # interrupt_pin: 
+    # interrupt_pin:
-      # number: 3
+    # number: 3
-      # ignore_strapping_warning: true
+    # ignore_strapping_warning: true
     calibration:
       x_min: 0
       x_max: 479
@@ -209,14 +210,14 @@ lvgl:
   log_level: WARN
   color_depth: 16
   default_font: montserrat_18
-#   on_idle:
+  #   on_idle:
-#     - timeout: !lambda "return (id(display_timeout).state * 1000);"
+  #     - timeout: !lambda "return (id(display_timeout).state * 1000);"
-#       then:
+  #       then:
-#         - logger.log: "LVGL is idle"
+  #         - logger.log: "LVGL is idle"
-#         - light.turn_off:
+  #         - light.turn_off:
-#             id: display_backlight
+  #             id: display_backlight
-#             transition_length: 2500ms
+  #             transition_length: 2500ms
-#         - lvgl.pause:
+  #         - lvgl.pause:
   top_layer:
     widgets:
       - buttonmatrix:
@@ -229,21 +230,21 @@ lvgl:
           #   styles: header_footer
           rows:
             - buttons:
-              - id: page_prev
+                - id: page_prev
-                text: "\uF053"
+                  text: "\uF053"
-                on_press:
+                  on_press:
-                  then:
+                    then:
-                    lvgl.page.previous:
+                      lvgl.page.previous:
-              - id: page_home
+                - id: page_home
-                text: "\uF015"
+                  text: "\uF015"
-                on_press:
+                  on_press:
-                  then:
+                    then:
-                    lvgl.page.show: main_page
+                      lvgl.page.show: main_page
-              - id: page_next
+                - id: page_next
-                text: "\uF054"
+                  text: "\uF054"
-                on_press:
+                  on_press:
-                  then:
+                    then:
-                    lvgl.page.next:
+                      lvgl.page.next:
   pages:
     - id: main_page
       widgets:
@@ -286,4 +287,4 @@ lvgl:
             - homeassistant.action:
                 action: light.toggle
                 data:
-                    entity_id: light.mcu_dimmer_exercise_room_fan
+                    entity_id: light.mcu_dimmer_exercise_room_fan

mcu-lvgl.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: lvgl
   name: LVGL
@@ -11,7 +12,6 @@ esphome:
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
-  includes: ota.h
 
 esp32:
   variant: esp32s3
@@ -27,12 +27,12 @@ esp32:
 
 psram:
   mode: octal
-  speed: 80MHz 
+  speed: 80MHz
 
 packages:
   common: !include common/common.yaml
 
-# PINOUTS: ESP32 Cheap Yellow Display, 4.3", IPS, Capacitive 
+# PINOUTS: ESP32 Cheap Yellow Display, 4.3", IPS, Capacitive
 ## Display
 # R0        GND
 # R1        GND
@@ -256,7 +256,7 @@ script:
       #     src: solar_power_icon
       #     img_recolor: 0xFFF000 #mixes this color with the base image
       #     #img_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
-      #     #bg_color: 0xFFFFFF          
+      #     #bg_color: 0xFFFFFF
       # # - lvgl.indicator.line.update:
       # #     id: power_meter_input2
       # #     value: !lambda return id(counting_number).state;
@@ -288,7 +288,7 @@ script:
       #     src: solar_power_icon
       #     img_recolor: 0xFFF000 #mixes this color with the base image
       #     #img_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
-      #     #bg_color: 0xFFFFFF   
+      #     #bg_color: 0xFFFFFF
 
 image:
   - file: mdi:sun-wireless-outline
@@ -329,7 +329,7 @@ lvgl:
       bg_opa: TRANSP
       bg_color: 0
       radius: 4
-      pad_all: 2 
+      pad_all: 2
     - id: details_style
       text_font: MONTSERRAT_18
       align: center
@@ -338,7 +338,7 @@ lvgl:
       bg_opa: TRANSP
       bg_color: 0
       radius: 4
-      pad_all: 2 
+      pad_all: 2
   widgets:
     - obj: # Meter
         height: 240
@@ -663,4 +663,4 @@ lvgl:
               image_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
               #bg_color: 0xFFFFFF
               y: 50
-              #x: -60
+              #x: -60

mcu-m5paper.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: m5paper
   name: M5Paper
@@ -27,7 +28,7 @@ time:
   - platform: homeassistant
     id: ha_time
     timezone: Europe/Bratislava
-    on_time_sync: 
+    on_time_sync:
       - bm8563.write_time
   - platform: bm8563
     id: rtc_time
@@ -75,9 +76,9 @@ binary_sensor:
     pin:
       number: 37
       inverted: true
-    on_press: 
+    on_press:
       - component.update: m5paper_display
-    on_release: 
+    on_release:
       - component.update: m5paper_display
   - platform: gpio
     name: ${name} Button Press
@@ -100,7 +101,7 @@ binary_sensor:
     x_max: 100
     y_min: 0
     y_max: 100
-    on_press: 
+    on_press:
       # Example of applying the sleep duration and shutting down to the lowest power mode
       - bm8563.apply_sleep_duration
       - delay: 1s

mcu-mains-power.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: mains-power
   name: Mains Power
@@ -21,7 +22,7 @@ esp32:
   variant: esp32
   framework:
     type: esp-idf
-  
+
 packages:
   common: !include common/common.yaml
 
@@ -99,7 +100,7 @@ sensor:
   #     - lambda: return x * (0.001) + 2282;
   #   unit_of_measurement: kWh
   #   icon: mdi:counter
-  # L2  
+  # L2
   - platform: pzemac
     address: 11
     id: pzemac_l2
@@ -224,7 +225,7 @@ button:
       - pzemac.reset_energy: pzemac_l1
       - pzemac.reset_energy: pzemac_l2
       - pzemac.reset_energy: pzemac_l3
-  
+
 time:
   - platform: homeassistant
     id: ha_time
@@ -234,4 +235,4 @@ time:
         then:
           - pzemac.reset_energy: pzemac_l1
           - pzemac.reset_energy: pzemac_l2
-          - pzemac.reset_energy: pzemac_l3
+          - pzemac.reset_energy: pzemac_l3

mcu-nrf-dk.yaml

@@ -0,0 +1,11 @@
+---
+esphome:
+  name: mcu-nrf-dk
+  friendly_name: mcu-nrf-dk
+
+nrf52:
+  board: nrf52840_dk
+  bootloader: adafruit_nrf52_sd140_v7
+
+# Enable logging
+logger:

mcu-nspanel-bedroom.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-bedroom
   name: Bedroom NSPanel
@@ -33,7 +34,7 @@ external_components:
       url: https://github.com/sairon/esphome-nspanel-lovelace-ui
       ref: dev
     components: [nspanel_lovelace]
-  
+
 packages:
   common: !include common/common.yaml
 
@@ -63,7 +64,7 @@ api:
       then:
         - lambda: |-
             id(nspanel_id).upload_tft("${tft_url}");
-            
+
     - service: upload_tft
       variables:
         url: string
@@ -267,7 +268,6 @@ sensor:
       reference_temperature: 25°C
       reference_resistance: 10kOhm
     name: Temperature
-    
+
   - platform: template
     id: room_temperature_id
-

mcu-nspanel-dev.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-dev
   name: NSPanel DEV
@@ -36,6 +37,8 @@ esp32:
     type: esp-idf
     advanced:
       minimum_chip_revision: "3.0"
+      include_builtin_idf_components:
+        - esp_http_client
 
 external_components:
   # - source:
@@ -51,7 +54,7 @@ external_components:
     refresh: 0s
     components: [nspanel_lovelace]
   # - source: components
-  
+
 packages:
   common: !include common/common.yaml
   # common: !include common/common_dev.yaml
@@ -85,12 +88,12 @@ api:
         # - delay: 10s
         # - lambda: 'id(nspanel_id).send_custom_command("notify~~");'
 
-# DISABLED until https://github.com/olicooper/esphome-nspanel-lovelace-native/issues/20 is fixed
+    # DISABLED until https://github.com/olicooper/esphome-nspanel-lovelace-native/issues/20 is fixed
     # - service: update_tft
     #   then:
     #     - lambda: |-
     #         id(nspanel_id).upload_tft("${tft_url}");
-            
+
     # - service: upload_tft
     #   variables:
     #     url: string
@@ -517,7 +520,7 @@ sensor:
       reference_temperature: 25°C
       reference_resistance: 10kOhm
     name: Living Room Temperature Entry
-    
+
   - platform: template
     id: room_temperature_id
 

mcu-nspanel-fireplace.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-fireplace
   name: Fireplace NSPanel
@@ -31,7 +32,7 @@ external_components:
       url: https://github.com/sairon/esphome-nspanel-lovelace-ui
       ref: dev
     components: [nspanel_lovelace]
-  
+
 packages:
   common: !include common/common.yaml
 
@@ -61,7 +62,7 @@ api:
       then:
         - lambda: |-
             id(nspanel_id).upload_tft("${tft_url}");
-            
+
     - service: upload_tft
       variables:
         url: string
@@ -187,7 +188,7 @@ binary_sensor:
       number: 14
       inverted: true
     on_click:
-    #   - switch.toggle: relay_1
+      #   - switch.toggle: relay_1
       - min_length: 50ms
         max_length: 350ms
         then:
@@ -217,7 +218,7 @@ binary_sensor:
       number: 27
       inverted: true
     on_click:
-    #   - switch.toggle: relay_2
+      #   - switch.toggle: relay_2
       - min_length: 50ms
         max_length: 350ms
         then:
@@ -294,6 +295,6 @@ sensor:
       reference_temperature: 25°C
       reference_resistance: 10kOhm
     name: "Living Room Temperature"
-    
+
   - platform: template
     id: room_temperature_id

mcu-nspanel-office-j.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-office-j
   name: Office J NSPanel
@@ -32,13 +33,13 @@ external_components:
       url: https://github.com/sairon/esphome-nspanel-lovelace-ui
       ref: dev
     components: [nspanel_lovelace]
-  
+
 packages:
   common: !include common/common.yaml
 
 api:
   # https://github.com/granadaxronos/120-SONG_NOKIA_RTTTL_RINGTONE_PLAYER_FOR_ARDUINO_UNO/blob/master/RTTTL_PLAYER/songs.h
-  # 
+  #
   # stupnovane:d=4,o=6,b=180:c,e,g
   # help:d=4,o=6,b=100:f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f
   # gate_opening:d=16,o=5,b=160:a, 8p, a
@@ -67,7 +68,7 @@ api:
       then:
         - lambda: |-
             id(nspanel_id).upload_tft("${tft_url}");
-            
+
     - service: upload_tft
       variables:
         url: string
@@ -299,7 +300,7 @@ sensor:
 # text_sensor:
 #   - platform: ble_scanner
 #     name: BLE Scanner
-    
+
 # esp32_ble_beacon:
 #   type: iBeacon
 #   uuid: '6d68252f-2e6f-b5b9-965f-43c0a3713880'

mcu-nspanel-office-r.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-office-r
   name: Office R NSPanel
@@ -33,7 +34,7 @@ external_components:
       url: https://github.com/sairon/esphome-nspanel-lovelace-ui
       ref: dev
     components: [nspanel_lovelace]
-  
+
 packages:
   common: !include common/common.yaml
 
@@ -56,7 +57,7 @@ script:
 
 api:
   # https://github.com/granadaxronos/120-SONG_NOKIA_RTTTL_RINGTONE_PLAYER_FOR_ARDUINO_UNO/blob/master/RTTTL_PLAYER/songs.h
-  # 
+  #
   # stupnovane:d=4,o=6,b=180:c,e,g
   # help:d=4,o=6,b=100:f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f,8p,f
   # gate_opening:d=16,o=5,b=160:a, 8p, a
@@ -86,7 +87,7 @@ api:
         - logger.log: "tft updating from: ${tft_url}"
         - lambda: |-
             id(nspanel_id).upload_tft("${tft_url}");
-            
+
     - service: upload_tft
       variables:
         url: string
@@ -356,7 +357,7 @@ sensor:
 # text_sensor:
 #   - platform: ble_scanner
 #     name: BLE Scanner
-    
+
 # esp32_ble_beacon:
 #   type: iBeacon
 #   uuid: '6d68252f-2e6f-b5b9-965f-43c0a3713880'

mcu-nspanel-patio.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: nspanel-patio
   name: Patio NSPanel
@@ -31,8 +32,7 @@ external_components:
       url: https://github.com/sairon/esphome-nspanel-lovelace-ui
       ref: dev
     components: [nspanel_lovelace]
-  - source: components
+
-  
 packages:
   common: !include common/common.yaml
 
@@ -62,7 +62,7 @@ api:
       then:
         - lambda: |-
             id(nspanel_id).upload_tft("${tft_url}");
-            
+
     - service: upload_tft
       variables:
         url: string
@@ -235,7 +235,7 @@ switch:
     entity_category: config
     pin:
       number: 19
-      
+
   - platform: gpio
     name: Screen Power
     id: screen_power
@@ -270,6 +270,6 @@ sensor:
       reference_temperature: 25°C
       reference_resistance: 10kOhm
     name: Living Room Temperature
-    
+
   - platform: template
     id: room_temperature_id

mcu-office-r.yaml

@@ -1,9 +1,10 @@
+---
 substitutions:
   device: office-r
   name: Office R
   area: Office R
   comment: "${area} | MS Teams presence"
-  
+
 esphome:
   name: mcu-${device}
   friendly_name: ${name}
@@ -54,4 +55,4 @@ output:
     pin: 5
   - platform: ledc
     id: led_blue
-    pin: 6
+    pin: 6

mcu-patio.yaml

@@ -1,9 +1,10 @@
+---
 substitutions:
   device: patio
   name: Patio
   area: Outside
   comment: "${area}, Patio | On the back yard"
-  
+
 esphome:
   name: mcu-${device}
   friendly_name: ${name}

mcu-pow-dishwasher.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: pow-dishwasher
   name: Dishwasher POW
@@ -16,24 +17,14 @@ esp32:
     advanced:
       minimum_chip_revision: "3.1"
 
-interval:
-  - interval: 30s
-    then:
-      if:
-        condition:
-          wifi.connected:
-        then:
-          - light.turn_on: wifi_status_led
-        else:
-          - light.turn_off: wifi_status_led
-
 packages:
   common: !include common/common.yaml
 
 uart:
-  rx_pin: 16
+  - id: cse7766_uart
-  baud_rate: 4800
+    rx_pin: 16
-  parity: EVEN
+    baud_rate: 4800
+    parity: EVEN
 
 binary_sensor:
   - platform: gpio
@@ -92,7 +83,7 @@ display:
       it.display_kwh(false);
       it.printf(0, "%.1f", id(v_sensor).state);
       it.printf(1, "%.1f", id(a_sensor).state);
-    } else {  
+    } else {
       it.display_voltage(false);
       it.display_kwh(true);
       it.printf(0, "%.1f", id(wh_sensor).state);
@@ -120,6 +111,7 @@ output:
 
 sensor:
   - platform: cse7766
+    uart_id: cse7766_uart
     current:
       name: Current
       id: a_sensor
@@ -143,10 +135,15 @@ sensor:
           then:
             - light.turn_off: switch_led
     energy:
-      name: Energy"
+      name: Energy
       id: wh_sensor
       filters:
         - throttle_average: ${update_interval}
+    power_factor:
+      name: Power Factor
+      id: power_factor
+      filters:
+        - throttle_average: ${update_interval}
 
   - platform: total_daily_energy
     name: Total Daily Energy
@@ -155,12 +152,6 @@ sensor:
       - multiply: 0.001
     unit_of_measurement: kWh
 
-  - platform: template
-    name: Power Factor
-    device_class: power_factor
-    id: power_factor
-    lambda: return id(w_sensor).state / id(v_sensor).state / id(a_sensor).state;
-
 switch:
   - platform: template
     name: Relay
@@ -180,7 +171,6 @@ switch:
     on_turn_on:
       - delay: 500ms
       - switch.turn_off: relay_on  # bi-stable relay so no need to keep on
-      - light.turn_on: switch_led
     interlock: [relay_off]
 
   - platform: gpio
@@ -191,8 +181,7 @@ switch:
     on_turn_on:
       - delay: 500ms
       - switch.turn_off: relay_off # bi-stable relay so no need to keep on
-      - light.turn_off: switch_led
     interlock: [relay_on]
 
 time:
-  - !include common/time/homeassistant.yaml
+  - !include common/time/homeassistant.yaml

mcu-pow-washer.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: pow-washer
   name: Washer POW
@@ -16,24 +17,14 @@ esp32:
     advanced:
       minimum_chip_revision: "3.1"
 
-interval:
-  - interval: 30s
-    then:
-      if:
-        condition:
-          wifi.connected:
-        then:
-          - light.turn_on: wifi_status_led
-        else:
-          - light.turn_off: wifi_status_led
-
 packages:
   common: !include common/common.yaml
 
 uart:
-  rx_pin: 16
+  - id: cse7766_uart
-  baud_rate: 4800
+    rx_pin: 16
-  parity: EVEN
+    baud_rate: 4800
+    parity: EVEN
 
 binary_sensor:
   - platform: gpio
@@ -92,7 +83,7 @@ display:
       it.display_kwh(false);
       it.printf(0, "%.1f", id(v_sensor).state);
       it.printf(1, "%.1f", id(a_sensor).state);
-    } else {  
+    } else {
       it.display_voltage(false);
       it.display_kwh(true);
       it.printf(0, "%.1f", id(wh_sensor).state);
@@ -120,6 +111,7 @@ output:
 
 sensor:
   - platform: cse7766
+    uart_id: cse7766_uart
     current:
       name: Current
       id: a_sensor
@@ -147,6 +139,11 @@ sensor:
       id: wh_sensor
       filters:
         - throttle_average: ${update_interval}
+    power_factor:
+      name: Power Factor
+      id: power_factor
+      filters:
+        - throttle_average: ${update_interval}
 
   - platform: total_daily_energy
     name: Total Daily Energy
@@ -155,12 +152,6 @@ sensor:
       - multiply: 0.001
     unit_of_measurement: kWh
 
-  - platform: template
-    name: Power Factor
-    device_class: power_factor
-    id: power_factor
-    lambda: return id(w_sensor).state / id(v_sensor).state / id(a_sensor).state;
-
 switch:
   - platform: template
     name: Relay
@@ -180,7 +171,6 @@ switch:
     on_turn_on:
       - delay: 500ms
       - switch.turn_off: relay_on  # bi-stable relay so no need to keep on
-      - light.turn_on: switch_led
     interlock: [relay_off]
 
   - platform: gpio
@@ -191,8 +181,7 @@ switch:
     on_turn_on:
       - delay: 500ms
       - switch.turn_off: relay_off # bi-stable relay so no need to keep on
-      - light.turn_off: switch_led
     interlock: [relay_on]
 
 time:
-  - !include common/time/homeassistant.yaml
+  - !include common/time/homeassistant.yaml

mcu-rf433.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: rf433
   name: RF433 Bridge
@@ -28,11 +29,11 @@ remote_transmitter:
   carrier_duty_percent: 100%
 
 binary_sensor:
-# Key Fob remote
+  # Key Fob remote
-# A: 011110110011101010100010
+  # A: 011110110011101010100010
-# B: 011110110011101010101000
+  # B: 011110110011101010101000
-# C: 011110110011101010100001
+  # C: 011110110011101010100001
-# D: 011110110011101010100100
+  # D: 011110110011101010100100
   - platform: remote_receiver
     name: "Keyfob Remote Button A"
     rc_switch_raw:
@@ -73,4 +74,4 @@ status_led:
   #   rc_switch_raw:
   #     code: '100000000001010000000010'
   #     protocol: 1
-  #   repeat: 3
+  #   repeat: 3

mcu-rfid-reader.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: rfid-reader
   name: RFID Reader

mcu-shed.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: shed
   name: Shed
@@ -37,18 +38,18 @@ binary_sensor:
       number: 6
       inverted: true
     on_click:
-    - min_length: 50ms
+      - min_length: 50ms
-      max_length: 350ms
+        max_length: 350ms
-      then:
+        then:
-        - switch.toggle: shed_light_relay
+          - switch.toggle: shed_light_relay
-    - min_length: 351ms
+      - min_length: 351ms
-      max_length: 1000ms
+        max_length: 1000ms
-      then:
+        then:
-        - switch.toggle: garden_light_relay
+          - switch.toggle: garden_light_relay
-    - min_length: 1001ms
+      - min_length: 1001ms
-      max_length: 10000ms
+        max_length: 10000ms
-      then:
+        then:
-        - switch.toggle: socket_relay
+          - switch.toggle: socket_relay
 
 switch:
   - platform: gpio
@@ -108,4 +109,4 @@ switch:
       mode: OUTPUT
 
 time:
-  - !include common/time/homeassistant.yaml
+  - !include common/time/homeassistant.yaml

mcu-socket-01.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: socket-01
   name: Socket 01
@@ -72,7 +73,7 @@ light:
     name: Blue LED
     id: light_blue
     output: led_blue
-    
+
 sensor:
   - platform: hlw8012
     sel_pin:
@@ -99,8 +100,8 @@ sensor:
     name: Total Daily Power"
     power_id: power
     filters:
-        # Multiplication factor from W to kW is 0.001
+      # Multiplication factor from W to kW is 0.001
-        - multiply: 0.001
+      - multiply: 0.001
     unit_of_measurement: kWh
     icon: mdi:circle-slice-3
 

mcu-socket-02.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: socket-02
   device_id: socket_02
@@ -74,7 +75,7 @@ output:
     pin: GPIO02
     id: led_blue
     inverted: True
-    
+
 sensor:
   - platform: hlw8012
     sel_pin:
@@ -101,8 +102,8 @@ sensor:
     name: Total Daily Power
     power_id: power
     filters:
-        # Multiplication factor from W to kW is 0.001
+      # Multiplication factor from W to kW is 0.001
-        - multiply: 0.001
+      - multiply: 0.001
     unit_of_measurement: kWh
     icon: mdi:circle-slice-3
 

mcu-socket-03.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: socket-03
   name: Socket 03
@@ -59,7 +60,7 @@ binary_sensor:
         - delay: 10s
         - switch.turn_off: relay
         - light.turn_off: light_blue
-        
+
 output:
   - platform: gpio
     pin: GPIO00
@@ -79,7 +80,7 @@ light:
     name: Blue LED
     id: light_blue
     output: led_blue
-    
+
 sensor:
   - platform: hlw8012
     sel_pin:
@@ -122,8 +123,8 @@ sensor:
     power_id: power
     accuracy_decimals: 5
     filters:
-        # Multiplication factor from W to kW is 0.001
+      # Multiplication factor from W to kW is 0.001
-        - multiply: 0.001
+      - multiply: 0.001
     unit_of_measurement: kWh
     icon: mdi:circle-slice-3
 

mcu-staircase-light.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: staircase-light
   name: Staircase

mcu-tft.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: tft
   name: TFT
@@ -32,7 +33,7 @@ packages:
 
 logger:
   logs:
-    component: ERROR 
+    component: ERROR
 
 # GPIO1   UART TX
 # GPIO3   UART RX

mcu-tracker.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: tracker
   name: Tracker
@@ -9,7 +10,7 @@ esphome:
   comment: ${comment}
   on_boot:
     # priority: -10
-    priority: 600 
+    priority: 600
     then:
       - logger.log: turning modem off
       - binary_sensor.template.publish:
@@ -33,7 +34,7 @@ esphome:
           state: ON
       # - switch.turn_on: cmd_gnss_enable
   # on_boot:
-  #   priority: 600 
+  #   priority: 600
   #   then:
   #     # https://www.manualslib.com/manual/1498555/Simcom-Sim7000g.html?page=25#manual
   #     - logger.log: turning modem off
@@ -42,7 +43,7 @@ esphome:
   #         state: OFF
   #     # The doc says that pulling 'modem_power' to ground works,
   #     # But I had to put if off for 2.6s, then on ?
-  #     - switch.turn_off: modem_powerkey  
+  #     - switch.turn_off: modem_powerkey
   #     - delay: 2.6s
   #     - switch.turn_on: modem_powerkey
   #     - logger.log: waiting off status
@@ -94,13 +95,12 @@ external_components:
       type: git
       url: https://github.com/crossan007/esphome
       ref: "feature/AXP192"
-    components: [ axp192 ]
+    components: [axp192]
   - source: github://pr#6721
-    components: [ network, modem ]
+    components: [network, modem]
   - source: github://pr#9802
-    components: [ modem ]
+    components: [modem]
-  - source: components
+
-  
 # packages:
 #   common: !include common/common.yaml
 
@@ -168,7 +168,7 @@ sensor:
       name: Longitude
     altitude:
       name: Altitude
-  
+
 switch:
   - platform: gpio
     id: modem_powerkey
@@ -273,31 +273,31 @@ text_sensor:
   #       parts.push_back(data.substr(0, pos));
   #       data.erase(0, pos + delimiter.length());
   #     }
-  #     parts.push_back(data); 
+  #     parts.push_back(data);
 
   #     if (parts.size() < 14) {
   #       return { "Invalid GNSS data: " + gnss_info };
   #     }
-    
+
   #     std::string latitude = parts[4];
   #     std::string lat_direction = parts[5];
   #     std::string longitude = parts[6];
   #     std::string lon_direction = parts[7];
-    
+
   #     if (latitude.empty() || lat_direction.empty() || longitude.empty() || lon_direction.empty()) {
   #       return { "Invalid GNSS data: " + gnss_info };
   #     }
-    
+
   #     double lat_deg = std::stod(latitude.substr(0, 2));
   #     double lat_min = std::stod(latitude.substr(2));
   #     double lat = lat_deg + (lat_min / 60.0);
   #     if (lat_direction == "S") lat = -lat;
-    
+
   #     double lon_deg = std::stod(longitude.substr(0, 3));
   #     double lon_min = std::stod(longitude.substr(3));
   #     double lon = lon_deg + (lon_min / 60.0);
   #     if (lon_direction == "W") lon = -lon;
-    
+
   #     std::string google_maps_link = "https://www.google.com/maps/search/?api=1&query=" + std::to_string(lat) + "," + std::to_string(lon);
   #     return { google_maps_link };
 
@@ -317,7 +317,7 @@ text_sensor:
 #       url: https://github.com/ssieb/custom_components
 #     components: [ serial ]
 #   - source: components
-  
+
 # packages:
 #   common: !include common/common.yaml
 
@@ -475,4 +475,4 @@ text_sensor:
 #     name: USSD Code
 #   - platform: serial
 #     uart_id: modem_uart
-#     id: modem_read
+#     id: modem_read

mcu-tv-light.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: tv-light
   name: TV Light
@@ -23,7 +24,7 @@ packages:
 # B 	      GPIO12 	PWM3
 # W1 	      GPIO14 	PWM4
 # W2 	      GPIO04 	PWM5
-# LED D1 R 	GPIO05 	
+# LED D1 R 	GPIO05
 # LED D2 G 	GPIO01
 
 light:
@@ -42,7 +43,7 @@ light:
           name: Slow Strobe
       - strobe:
           name: Fast Strobe
-          colors: 
+          colors:
             - state: true
               duration: 100ms
             - state: false
@@ -63,4 +64,4 @@ output:
     pin: GPIO14
   - platform: esp8266_pwm
     id: pwm_warm_white
-    pin: GPIO04
+    pin: GPIO04

mcu-vehicle-honda-pcx125.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: vehicle-honda-pcx125
   name: Vehicle Honda PCX125
@@ -9,127 +10,13 @@ esphome:
   friendly_name: ${name}
   area: ${area}
   comment: ${comment}
-  on_loop:
-    then:
-      lambda: |-
-        static uint32_t last_state = 0;
-        auto state = App.get_app_state();
-        if (state != last_state) {
-          if (state & STATUS_LED_ERROR) {
-            auto call = id(led).turn_on();
-            call.set_effect("ERROR");
-            call.perform();
-          } else if (state & STATUS_LED_WARNING) {
-            auto call = id(led).turn_on();
-            call.set_effect("BOOT");
-            call.perform();
-          } else {
-            //auto call = id(led).turn_off();
-            //call.perform();
-            auto call = id(led).turn_on();
-            call.set_effect("BEACON");
-            call.perform();
-          }
-          last_state = state;
-        }
-
-esp32:
-  variant: esp32
-  framework:
-    type: esp-idf
-
-# api:
-#   reboot_timeout: 0s
-
-# wifi:
-#   reboot_timeout: 0s
-
-external_components:
-  - source: components
 
 packages:
-  common: !include common/logger.yaml
+  base: !include common/vehicle_base.yaml
-#   common: !include common/common.yaml
+  logger: !include common/logger.yaml
-  
-# debug:
-
-# PINOUTS: M5ATOM
-# IR        G12
-# NEO       G27
-# BUTTON    G39
-# I2C0 SDA  G26
-# I2C0 SCL  G32
-# I2C1 SDA  G25
-# I2C1 SCL  G21
-# UART0 RX  G3
-# UART0 TX  G1
-# UART1 RX  G23
-# UART1 TX  G33
-# 1-WIRE    G22
-# NC        G19
 
 esp32_ble_beacon:
   type: iBeacon
   uuid: !secret ble_beacon_honda_uuid
   major: !secret ble_beacon_honda_major
   minor: !secret ble_beacon_honda_minor
-
-light:
-  - platform: esp32_rmt_led_strip
-    name: LED
-    id: led
-    rgb_order: GRB
-    pin: 27
-    num_leds: 1
-    chipset: ws2812
-    restore_mode: ALWAYS_OFF
-    effects:
-      - strobe:
-          name: "BEACON"
-          colors:
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 200ms
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 10s
-      - lambda:
-          name: "ERROR"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(1, 0, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;
-      - lambda:
-          name: "BOOT"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(0, 1, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;

mcu-vehicle-suzuki-dl650.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: vehicle-suzuki-dl650
   name: Vehicle Suzuki DL650
@@ -9,127 +10,13 @@ esphome:
   friendly_name: ${name}
   area: ${area}
   comment: ${comment}
-  on_loop:
-    then:
-      lambda: |-
-        static uint32_t last_state = 0;
-        auto state = App.get_app_state();
-        if (state != last_state) {
-          if (state & STATUS_LED_ERROR) {
-            auto call = id(led).turn_on();
-            call.set_effect("ERROR");
-            call.perform();
-          } else if (state & STATUS_LED_WARNING) {
-            auto call = id(led).turn_on();
-            call.set_effect("BOOT");
-            call.perform();
-          } else {
-            //auto call = id(led).turn_off();
-            //call.perform();
-            auto call = id(led).turn_on();
-            call.set_effect("BEACON");
-            call.perform();
-          }
-          last_state = state;
-        }
-
-esp32:
-  variant: esp32
-  framework:
-    type: esp-idf
-
-# api:
-#   reboot_timeout: 0s
-
-# wifi:
-#   reboot_timeout: 0s
-
-external_components:
-  - source: components
 
 packages:
-  common: !include common/logger.yaml
+  base: !include common/vehicle_base.yaml
-#   common: !include common/common.yaml
+  logger: !include common/logger.yaml
-  
-# debug:
-
-# PINOUTS: M5ATOM
-# IR        G12
-# NEO       G27
-# BUTTON    G39
-# I2C0 SDA  G26
-# I2C0 SCL  G32
-# I2C1 SDA  G25
-# I2C1 SCL  G21
-# UART0 RX  G3
-# UART0 TX  G1
-# UART1 RX  G23
-# UART1 TX  G33
-# 1-WIRE    G22
-# NC        G19
 
 esp32_ble_beacon:
   type: iBeacon
   uuid: !secret ble_beacon_suzuki_uuid
   major: !secret ble_beacon_suzuki_major
   minor: !secret ble_beacon_suzuki_minor
-
-light:
-  - platform: esp32_rmt_led_strip
-    name: LED
-    id: led
-    rgb_order: GRB
-    pin: 27
-    num_leds: 1
-    chipset: ws2812
-    restore_mode: ALWAYS_OFF
-    effects:
-      - strobe:
-          name: "BEACON"
-          colors:
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 200ms
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 10s
-      - lambda:
-          name: "ERROR"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(1, 0, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;
-      - lambda:
-          name: "BOOT"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(0, 1, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;

mcu-vehicle-toyota-auris-ts.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: vehicle-toyota-auris-ts
   name: Vehicle Toyota Auris TS
@@ -16,69 +17,12 @@ esphome:
             - binary_sensor.is_off: button
           then:
             - wifi.disable:
-  on_loop:
-    then:
-      lambda: |-
-        static uint32_t last_state = 0;
-        auto state = App.get_app_state();
-        if (state != last_state) {
-          if (state & STATUS_LED_ERROR) {
-            auto call = id(led).turn_on();
-            call.set_effect("ERROR");
-            call.perform();
-          } else if (state & STATUS_LED_WARNING) {
-            auto call = id(led).turn_on();
-            call.set_effect("BOOT");
-            call.perform();
-          } else {
-            //auto call = id(led).turn_off();
-            //call.perform();
-            auto call = id(led).turn_on();
-            call.set_effect("BEACON");
-            call.perform();
-          }
-          last_state = state;
-        }
-
-esp32:
-  variant: esp32
-  framework:
-    type: esp-idf
-    # version: 5.3.2
-    # platform_version: 53.03.11
-
-external_components:
-  - source: components
 
 packages:
+  base: !include common/vehicle_base.yaml
   wifi: !include common/wifi.yaml
   logger: !include common/logger.yaml
-  # api: !include common/api.yaml
   ota: !include common/ota.yaml
-#   common: !include common/common.yaml
-
-# api:
-#   reboot_timeout: 0s
-
-# wifi:
-#   enable_on_boot: false
-
-# debug:
-
-# PINOUTS: M5ATOM
-# IR        G12
-# NEO       G27
-# BUTTON    G39
-# I2C0 SDA  G26
-# I2C0 SCL  G32
-# I2C1 SDA  G25
-# I2C1 SCL  G21
-# UART0 RX  G3
-# UART0 TX  G1
-# UART1 RX  G23
-# UART1 TX  G33
-# 1-WIRE    G22
-# NC        G19
 
 binary_sensor:
   - platform: gpio
@@ -92,63 +36,3 @@ esp32_ble_beacon:
   uuid: !secret ble_beacon_toyota_auris_uuid
   major: !secret ble_beacon_toyota_auris_major
   minor: !secret ble_beacon_toyota_auris_minor
-
-light:
-  - platform: esp32_rmt_led_strip
-    name: LED
-    id: led
-    rgb_order: GRB
-    pin: 27
-    num_leds: 1
-    chipset: ws2812
-    restore_mode: ALWAYS_OFF
-    effects:
-      - strobe:
-          name: "BEACON"
-          colors:
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 200ms
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 10s
-      - lambda:
-          name: "ERROR"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(1, 0, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;
-      - lambda:
-          name: "BOOT"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(0, 1, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;

mcu-vehicle-toyota-yaris-cross.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: vehicle-toyota-yaris-cross
   name: Vehicle Toyota Yaris Cross
@@ -9,128 +10,13 @@ esphome:
   friendly_name: ${name}
   area: ${area}
   comment: ${comment}
-  on_loop:
-    then:
-      lambda: |-
-        static uint32_t last_state = 0;
-        auto state = App.get_app_state();
-        if (state != last_state) {
-          if (state & STATUS_LED_ERROR) {
-            auto call = id(led).turn_on();
-            call.set_effect("ERROR");
-            call.perform();
-          } else if (state & STATUS_LED_WARNING) {
-            auto call = id(led).turn_on();
-            call.set_effect("BOOT");
-            call.perform();
-          } else {
-            //auto call = id(led).turn_off();
-            //call.perform();
-            auto call = id(led).turn_on();
-            call.set_effect("BEACON");
-            call.perform();
-          }
-          last_state = state;
-        }
-
-esp32:
-  variant: esp32
-  framework:
-    type: esp-idf
-
-# api:
-#   reboot_timeout: 0s
-
-# wifi:
-#   reboot_timeout: 0s
-
-external_components:
-  - source: components
 
 packages:
-  common: !include common/logger.yaml
+  base: !include common/vehicle_base.yaml
-  # wifi: !include common/wifi.yaml
+  logger: !include common/logger.yaml
-  # common: !include common/common.yaml
-  
-# debug:
-
-# PINOUTS: M5ATOM
-# IR        G12
-# NEO       G27
-# BUTTON    G39
-# I2C0 SDA  G26
-# I2C0 SCL  G32
-# I2C1 SDA  G25
-# I2C1 SCL  G21
-# UART0 RX  G3
-# UART0 TX  G1
-# UART1 RX  G23
-# UART1 TX  G33
-# 1-WIRE    G22
-# NC        G19
 
 esp32_ble_beacon:
   type: iBeacon
   uuid: !secret ble_beacon_toyota_yaris_uuid
   major: !secret ble_beacon_toyota_yaris_major
   minor: !secret ble_beacon_toyota_yaris_minor
-
-light:
-  - platform: esp32_rmt_led_strip
-    name: LED
-    id: led
-    rgb_order: GRB
-    pin: 27
-    num_leds: 1
-    chipset: ws2812
-    restore_mode: ALWAYS_OFF
-    effects:
-      - strobe:
-          name: "BEACON"
-          colors:
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 200ms
-            - state: true
-              red: 0%
-              green: 0%
-              blue: 50%
-              duration: 200ms
-            - state: false
-              duration: 10s
-      - lambda:
-          name: "ERROR"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(1, 0, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;
-      - lambda:
-          name: "BOOT"
-          update_interval: 0.5s
-          lambda: |-
-            static bool state = false;
-            auto call = id(led).turn_on();
-            call.set_transition_length(500);
-            call.set_rgb(0, 1, 0);
-            if (!state) {
-              call.set_brightness(1);
-            } else {
-              // If using 0, it freaks Home Assistant UI.
-              call.set_brightness(0.01);
-            }
-            call.perform();
-            state = !state;

mcu-waterproof-socket.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: waterproof-socket
   name: Waterproof Socket

mcu-well.yaml

@@ -1,3 +1,4 @@
+---
 substitutions:
   device: well
   name: Well
@@ -289,4 +290,4 @@ valve:
       - switch.turn_off: irrigation_relay_8
 
 time:
-  - !include common/time/homeassistant.yaml
+  - !include common/time/homeassistant.yaml

sonoff_dual_out.h

@@ -1,44 +0,0 @@
-#include "esphome.h"
-using namespace esphome;
-
-class SonoffOut1 : public Component, public switch_::Switch {
- public:
-  void setup() override {
-    // This will be called by App.setup()
-  }
-  
-  void write_state(bool state) override {
-    Serial.write(0xA0);
-    Serial.write(0x04);
-    if (state)
-      Serial.write(0x05);
-    else
-      Serial.write(0x00);
-    Serial.write(0xA1);
-    Serial.write('\n');
-    Serial.flush();
-    publish_state(state);
-  }
-};
-
-class SonoffOut2 : public Component, public switch_::Switch {
- public:
-  void setup() override {
-    // This will be called by App.setup()
-  }
-
-  void write_state(bool state) override {
-    Serial.write(0xA0);
-    Serial.write(0x04);
-    if (state)
-      Serial.write(0x06);
-    else
-      Serial.write(0x00);
-    Serial.write(0xA1);
-    Serial.write('\n');
-    Serial.flush();
-    
-    publish_state(state);
-
-  }
-};