Slovak translation for esphome-nspanel-lovelace-native

mcu-air-office-r.yaml

@@ -2,10 +2,12 @@ substitutions:
   device: air-office-r
   name: Office R Air Quality Monitor
   name_short: Office R
-  comment: "DEV"
-  
+  area: Office R
+  comment: "${area} | AirQ Monitoring"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   
 esp32:
@@ -13,8 +15,8 @@ esp32:
   # board: m5stamp-pico
   framework:
     type: esp-idf
-    # version: 5.2.1
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: components
@@ -22,11 +24,6 @@ external_components:
 packages:
   common: !include common/common.yaml
   
-time:
-  - platform: homeassistant
-    id: ha_time
-    timezone: Europe/Bratislava
-
 i2c:
   # - id: i2c0
   sda: 32

mcu-atoms3.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: atoms3
   name: AtomS3
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | --"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
@@ -15,7 +17,7 @@ esphome:
   #           id(display_tft).enable();
   #           id(display_tft).transfer_byte(0x11);
   #           id(display_tft).disable();
-
+  
 esp32:
   board: esp32-s3-devkitc-1
   # board: m5stack-atoms3
@@ -25,17 +27,24 @@ esp32:
     # version: dev
     # version: 5.1.2
     # platform_version: 6.6.0
-    version: 5.2.1
-    platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
     # type: arduino
 
+pcf8574:
+  - id: 'pcf8574_hub'
+    address: 0x21
+    pcf8575: true
+
 animation:
   - file: "blinky.gif"
     id: blinky
     resize: 128x128
+    type: RGB565
   - file: "vault_boy_walking.gif"
     id: vaultboy
     resize: 168x121
+    type: RGB565
 
 logger:
   logs:
@@ -45,6 +54,17 @@ web_server:
   port: 80
   version: 3
 
+light:
+  - platform: esp32_rmt_led_strip
+    name: "${name} LED"
+    id: neo
+    rgb_order: GRB
+    pin: 2
+    num_leds: 1
+    # rmt_channel: 0
+    chipset: ws2812
+    restore_mode: ALWAYS_OFF
+
 text:
   - platform: template
     name: "${name} Test Text"
@@ -66,12 +86,6 @@ external_components:
     refresh: 0s
   # - source: github://pr#5586
   #   components: [ http_request ]
-  - source:
-      type: git
-      url: https://github.com/ssieb/esphome
-      ref: onewire
-    components: [ gpio ]
-    refresh: 1min
   # - source: github://mknjc/esphome@ds248x
   #   components: ds248x
   # - source: github://bekriebel/esphome@sh1107_fix
@@ -217,7 +231,15 @@ switch:
     channel: 4
     # interlock: *interlock_group_2
     m5stack_4relay_id: m5stack_relay_1
-
+  - platform: gpio
+    name: "PCF8574 Pin #8"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 17
+      # One of INPUT or OUTPUT
+      mode:
+        output: true
+      inverted: false
 spi:
   clk_pin: 17
   mosi_pin: 21
@@ -443,11 +465,12 @@ time:
   #    - 1.pool.ntp.org
   #    - 2.pool.ntp.org
 
-esp32_ble_tracker:
+# esp32_ble_tracker:
 #   scan_parameters:
-#     interval: 1100ms
-#     window: 1100ms
 #     active: true
 
-bluetooth_proxy:
-  active: true
+# bluetooth_proxy:
+#   active: true
+
+# esp32_improv:
+#   authorizer: none

mcu-basement-2.yaml

@@ -2,10 +2,12 @@ substitutions:
   device: basement-2
   name_short: Basement
   name: Basement 2
-  comment: "Basement: Lights"
+  area: Basement
+  comment: "${area} | Lights"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-basement.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: basement
   name: Basement
-  comment: "Basement: Sockets"
+  area: Basement
+  comment: "${area} | Sockets"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-bedroom-lamp-left.yaml

@@ -1,17 +1,21 @@
 substitutions:
   device: bedroom-lamp-left
   name: Bedroom Lamp Left
-  comment: ""
+  area: Bedroom
+  comment: "${area} | Left Lamp"
   default_transition_length: 800ms
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: esp32doit-devkit-v1
   framework:
     type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
     sdkconfig_options:
       CONFIG_FREERTOS_UNICORE: y
     advanced:

mcu-bedroom-lamp-right.yaml

@@ -1,17 +1,21 @@
 substitutions:
   device: bedroom-lamp-right
   name: Bedroom Lamp Right
-  comment: ""
+  area: Bedroom
+  comment: "${area} | Right Lamp"
   default_transition_length: 800ms
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: esp32doit-devkit-v1
   framework:
     type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
     sdkconfig_options:
       CONFIG_FREERTOS_UNICORE: y
     advanced:

mcu-c6-test-1.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: c6-test-1
   name: C6 TEST 1
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | C6"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   # platformio_options:
   #   board_build.flash_mode: dio
@@ -38,8 +40,8 @@ esp32:
   flash_size: 16MB
   framework:
     type: esp-idf
-    version: 5.2.1
-    platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 logger:
   hardware_uart: USB_SERIAL_JTAG

mcu-c6-test-2.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: c6-test-2
   name: C6 TEST 2
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | C6"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   # platformio_options:
   #   board_build.flash_mode: dio
@@ -38,8 +40,8 @@ esp32:
   flash_size: 16MB
   framework:
     type: esp-idf
-    version: 5.2.1
-    platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 logger:
   hardware_uart: USB_SERIAL_JTAG

mcu-cam-1.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: cam-1
   name: Cam 1
-  comment: "DEV: Camera"
-  
+  area: DEV
+  comment: "${area} | Camera"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:

mcu-can-node-1.yaml

@@ -1,19 +1,20 @@
 substitutions:
   device: can-node-1
   name: CAN Node 1
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | CANOpen"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: esp32dev
   framework:
-    # type: arduino
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: github://mrk-its/esphome-canopen@dev

mcu-can-node-2.yaml

@@ -1,19 +1,20 @@
 substitutions:
   device: can-node-2
   name: CAN Node 2
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | CANOpen"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: esp32dev
   framework:
-    # type: arduino
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: github://mrk-its/esphome-canopen@dev

mcu-cec-bedroom.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: cec-bedroom
   name: Bedroom TV
-  comment: "DEV"
-  
+  area: Bedroom
+  comment: "${area} | CEC"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
@@ -12,6 +14,8 @@ esp32:
   framework:
     # type: arduino
     type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   # - source: github://pr#3017

mcu-clock-1.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: clock-1
   name: Clock 1
-  comment: "First floor: Clock"
-  
+  area: Office R
+  comment: "${area} | Clock"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
@@ -14,8 +16,8 @@ esp32:
   variant: esp32c3
   framework:
     type: esp-idf
-    # version: 5.2.1
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml
@@ -35,7 +37,6 @@ packages:
 #
 # GPIO9   GPIO (BUZZER?)
 
-
 # https://github.com/granadaxronos/120-SONG_NOKIA_RTTTL_RINGTONE_PLAYER_FOR_ARDUINO_UNO/blob/master/RTTTL_PLAYER/songs.h
 api:
   services:

mcu-desk-lamp.yaml

@@ -1,18 +1,20 @@
 substitutions:
   device: desk-lamp
   name: Mi Desk Lamp
-  comment: ""
+  area: Room
+  comment: "${area} | Desk lamp"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.2.1
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 # external_components:
 #   - source: github://pr#7958
@@ -146,4 +148,4 @@ sensor:
             // apply new settings
             call.set_brightness(brightness);
             call.set_color_temperature(temp);
-            call.perform();
+            call.perform();

mcu-dimmer.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: dimmer
   name: Dimmer
-  comment: "Pain cave: Fan"
+  area: Basement
+  comment: "${area} | Pain cave fan"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_loop:
     then:
@@ -30,11 +32,9 @@ esphome:
 esp32:
   board: m5stack-atom
   framework:
-    # type: arduino
-    # version: 2.0.14
     type: esp-idf
-    # version: 5.2.1
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: github://pr#7072

mcu-echo-1.yaml

@@ -2,10 +2,12 @@ substitutions:
   device: echo-1
   name: Echo 1
   name_short: Echo 1
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | Echo"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:

mcu-echo.yaml

@@ -2,19 +2,21 @@ substitutions:
   device: echo
   name: Echo
   name_short: Echo
-  comment: "DEV"
-  
+  area: Office R
+  comment: "${area} | Speaker"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
-    type: arduino
-    # type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    # type: arduino
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: components
@@ -61,7 +63,8 @@ binary_sensor:
         input: true
         pullup: true
     on_click:
-      - media_player.toggle: media_out
+      - media_player.toggle:
+          id: media_out
 
 light:
   # - platform: neopixelbus
@@ -96,62 +99,50 @@ output:
       number: 23
       allow_other_uses: true
 
-# i2s_audio:
-#   - id: i2s_out
-#     i2s_lrclk_pin: 33
-#     i2s_bclk_pin: 19
-
-# adf_pipeline:
-#   - platform: i2s_audio
-#     type: audio_out
-#     id: adf_i2s_out
-#     i2s_audio_id: i2s_out
-#     i2s_dout_pin: 22
-
-# media_player:
-#   - platform: adf_pipeline
-#     keep_pipeline_alive: true
-#     id: media_out
-#     name: ${name} Player
-#     on_play:
-#       - light.turn_on: led_light
-#     on_idle:
-#       - light.turn_off: led_light
-#     pipeline:
-#       - self
-#       - adf_i2s_out
-
-
 i2s_audio:
   i2s_lrclk_pin: 33
   i2s_bclk_pin: 19
 
-media_player:
+speaker:
   - platform: i2s_audio
+    id: speaker_id
+    dac_type: external
+    i2s_dout_pin: 22
+    channel: mono
+    sample_rate: 48000
+  - platform: mixer
+    id: mixer_speaker_id
+    output_speaker: speaker_id
+    source_speakers:
+      - id: announcement_spk_mixer_input
+      - id: media_spk_mixer_input
+      - id: rtttl_spk_mixer_input
+  - platform: resampler
+    id: media_spk_resampling_input
+    output_speaker: media_spk_mixer_input
+  - platform: resampler
+    id: announcement_spk_resampling_input
+    output_speaker: announcement_spk_mixer_input
+  - platform: resampler
+    id: rtttl_spk_resampling_input
+    output_speaker: rtttl_spk_mixer_input
+
+media_player:
+  - platform: speaker
     id: media_out
     name: ${name} Player
-    dac_type: external
-    i2s_dout_pin:
-      number: 22
-      allow_other_uses: true
-    mode: mono
+    media_pipeline:
+        speaker: media_spk_resampling_input
+    announcement_pipeline:
+        speaker: announcement_spk_resampling_input
     on_play:
       - light.turn_on: led_light
     on_idle:
       - light.turn_off: led_light
 
-speaker:
-  - platform: i2s_audio
-    id: echo_speaker
-    dac_type: external
-    i2s_dout_pin:
-      number: 22
-      allow_other_uses: true
-    channel: mono
-
 rtttl:
   id: my_rtttl
-  speaker: echo_speaker
+  speaker: rtttl_spk_resampling_input
 
 # microphone:
 #   - platform: i2s_audio
@@ -168,4 +159,4 @@ rtttl:
 #       # - script.execute: say_hello_server
 #       - http_request.get: 
 #           url: https://esphome.io
-#           verify_ssl: false
+#           verify_ssl: false

mcu-eworkbench.yaml

@@ -1,7 +1,7 @@
 substitutions:
   device: eworkbench
   name: Electronics Workbench
-  comment: "Office R: Electronics Workbench"
+  comment: "Office R | Electronics Workbench"
   
 esphome:
   name: mcu-${device}
@@ -14,8 +14,8 @@ esp32:
   variant: esp32c3
   framework:
     type: esp-idf
-    version: 5.1.2
-    platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml
@@ -42,6 +42,10 @@ i2c:
     sda: 1
     scl: 0
     scan: true
+  # - id: i2c_grove_2
+  #   sda: 19
+  #   scl: 18
+  #   scan: true
 
 uart:
   - id: uart_log
@@ -53,87 +57,188 @@ uart:
     tx_pin: 19
     baud_rate: 9600
 
+pcf8574:
+  - id: 'pcf8574_hub'
+    address: 0x20
+    pcf8575: true
+
+switch:
+  - platform: gpio
+    name: "PCF8574 Pin #0"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 0
+      # One of INPUT or OUTPUT
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #1"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 1
+      # One of INPUT or OUTPUT
+      mode:
+        output: true
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #7"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 7
+      # One of INPUT or OUTPUT
+      mode:
+        output: true
+      inverted: false
+
 binary_sensor:
   - platform: gpio
-    id: rotary_encoder_button
+    name: "PCF8574 Pin #10"
     pin:
-      number: 6
-      # mode: INPUT_PULLUP
-      inverted: true
-    filters:
-      - delayed_on: 30ms
-      - delayed_off: 30ms
-    on_press:
-      - display_menu.enter:
+      pcf8574: pcf8574_hub
+      number: 8
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #11"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 9
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #12"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 10
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #13"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 11
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #14"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 12
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #15"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 13
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #15"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 14
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
+  - platform: gpio
+    name: "PCF8574 Pin #17"
+    pin:
+      pcf8574: pcf8574_hub
+      number: 15
+      # One of INPUT or OUTPUT
+      mode: INPUT
+      inverted: false
 
-display:
-  - platform: lcd_pcf8574
-    id: my_lcd
-    dimensions: 20x4
-    address: 0x27
-    user_characters:
-      - position: 0
-        data:  # mark_back symbol
-          - 0b00100
-          - 0b01000
-          - 0b11110
-          - 0b01001
-          - 0b00101
-          - 0b00001
-          - 0b11110
-          - 0b00000
-    lambda: |-
-      id(my_lcd_menu).draw();
-      if (!id(my_lcd_menu).is_active())
-        it.print("Menu is not active");
+# binary_sensor:
+#   - platform: gpio
+#     id: rotary_encoder_button
+#     pin:
+#       number: 6
+#       # mode: INPUT_PULLUP
+#       inverted: true
+#     filters:
+#       - delayed_on: 30ms
+#       - delayed_off: 30ms
+#     on_press:
+#       - display_menu.enter:
 
-lcd_menu:
-  id: my_lcd_menu
-  display_id: my_lcd
-  active: true
-  mode: rotary
-  mark_back: 0x08
-  mark_selected: 0x3e
-  mark_editing: 0x2a
-  mark_submenu: 0x7e
-  items:
-    - type: back
-      text: 'Back'
-    - type: label
-      text: 'Label 1'
-    - type: label
-      text: !lambda |-
-        return "Templated label";
+# display:
+#   - platform: lcd_pcf8574
+#     id: my_lcd
+#     i2c_id: i2c_grove
+#     dimensions: 20x4
+#     address: 0x27
+#     user_characters:
+#       - position: 0
+#         data:  # mark_back symbol
+#           - 0b00100
+#           - 0b01000
+#           - 0b11110
+#           - 0b01001
+#           - 0b00101
+#           - 0b00001
+#           - 0b11110
+#           - 0b00000
+#     lambda: |-
+#       id(my_lcd_menu).draw();
+#       if (!id(my_lcd_menu).is_active())
+#         it.print("Menu is not active");
 
-select:
-  - platform: template
-    id: hdmi_switch
-    optimistic: true
-    options:
-      - PC1
-      - PC2
-      - PC3
-      - PC4
-    initial_option: PC1
-    # set_action:
-    #   - logger.log:
-    #         format: "Chosen option: %s (index %d)"
-    #         args: ["x.c_str()", "i"]
-      # - uart.write:
-      #     id: uart_hdmi_switch
-      #     data: [0x47, 0x30, 0x31, 0x67, 0x41, 0x00]
+# lcd_menu:
+#   id: my_lcd_menu
+#   display_id: my_lcd
+#   active: true
+#   mode: rotary
+#   mark_back: 0x08
+#   mark_selected: 0x3e
+#   mark_editing: 0x2a
+#   mark_submenu: 0x7e
+#   items:
+#     - type: back
+#       text: 'Back'
+#     - type: label
+#       text: 'Label 1'
+#     - type: label
+#       text: !lambda |-
+#         return "Templated label";
 
-sensor:
-  - platform: rotary_encoder
-    id: rotary_encoder_sensor
-    pin_a: 4
-    pin_b: 5
-    filters:
-      debounce: 30ms
-    on_anticlockwise:
-      - display_menu.up:
-    on_clockwise:
-      - display_menu.down:
+# select:
+#   - platform: template
+#     id: hdmi_switch
+#     optimistic: true
+#     options:
+#       - PC1
+#       - PC2
+#       - PC3
+#       - PC4
+#     initial_option: PC1
+#     # set_action:
+#     #   - logger.log:
+#     #         format: "Chosen option: %s (index %d)"
+#     #         args: ["x.c_str()", "i"]
+#       # - uart.write:
+#       #     id: uart_hdmi_switch
+#       #     data: [0x47, 0x30, 0x31, 0x67, 0x41, 0x00]
+
+# sensor:
+#   - platform: rotary_encoder
+#     id: rotary_encoder_sensor
+#     pin_a: 4
+#     pin_b: 5
+#     filters:
+#       debounce: 30ms
+#     on_anticlockwise:
+#       - display_menu.up:
+#     on_clockwise:
+#       - display_menu.down:
 
 time:
   - platform: homeassistant

mcu-fireplace.yaml

@@ -1,18 +1,20 @@
 substitutions:
   device: fireplace
   name: Heating Fireplace
-  comment: "Ground floor, Kitchen: Fireplace monitoring for heating"
+  area: Living Room / Kitchen
+  comment: "${area}, Fireplace | Fireplace monitoring for heating"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: github://mknjc/esphome@ds248x

mcu-gate.yaml

@@ -1,18 +1,20 @@
 substitutions:
   device: gate
   name: Gate
-  comment: "Outside: Gate"
-  
+  area: Outside
+  comment: "${area} | Gate"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: components

mcu-heating.yaml

@@ -2,18 +2,20 @@ substitutions:
   device: heating
   name: Heating
   name_1: Heater
-  comment: "Basement: Hot water and Heating control"
-  
+  area: Basement
+  comment: "${area} | Hot water and Heating control"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: github://mknjc/esphome@ds248x
@@ -127,15 +129,6 @@ time:
               id(hot_water_demand).turn_off();
             }
 
-            // ## Heating - TYPE 1: heat water to desired max temperature at specified times
-            // ## Heating - TYPE 2: mantain temperature in min-max range in desired time range
-            if (id(heating_climate).mode == 0) {
-              id(heating_demand).turn_off();
-              ESP_LOGD("main", "Climate Heating is OFF => Turn Heating OFF!");
-            } else {
-              ESP_LOGD("main", "Climate Heating state is other than OFF => dont touch heating");
-            }
-
 climate:
   - platform: bang_bang
     sensor: hot_water_heater
@@ -155,23 +148,6 @@ climate:
     away_config:
       default_target_temperature_low: 30 °C
       default_target_temperature_high: 40 °C
-  - platform: bang_bang
-    sensor: current_heating_temperature_min
-    name: Heating
-    id: heating_climate
-    visual:
-      min_temperature: 12
-      max_temperature: 35
-      temperature_step: 0.1
-    default_target_temperature_low: 19 °C
-    default_target_temperature_high: 20 °C
-    heat_action:
-      - switch.turn_on: heating_demand
-    idle_action:
-      - switch.turn_off: heating_demand
-    away_config:
-      default_target_temperature_low: 17 °C
-      default_target_temperature_high: 18 °C
 
 i2c:
   # - id: i2c0
@@ -207,6 +183,10 @@ pca9554:
     address: 0x27
 
 switch:
+  - platform: template
+    name: "Heating Enabled"
+    id: heating_enabled
+    optimistic: True
   - platform: gpio
     name: "Hot Water Demand" # Hot Water Heating Demand (to Heater)
     id: hot_water_demand
@@ -265,48 +245,6 @@ sensor:
     address: 0x7301143F7F57AA28 # Heating Water Return (OUT from System, TO Heater)
     name: "Heating IN2"
     id: 'heating_in'
-  ## heating
-  - platform: homeassistant
-    id: current_heating_fireplace_temperature
-    entity_id: sensor.heating_fireplace
-  # - ground floor
-  - platform: homeassistant
-    id: kitchen_temperature
-    entity_id: sensor.zigbee_living_room_kitchen_temperature
-  - platform: homeassistant
-    id: room_temperature
-    entity_id: sensor.zigbee_room_temperature
-  # - first floor
-  - platform: homeassistant
-    id: bedroom_temperature
-    entity_id: sensor.zigbee_bedroom_temperature
-  - platform: homeassistant
-    id: office_j_temperature
-    entity_id: sensor.zigbee_office_j_temperature
-  - platform: homeassistant
-    id: office_r_temperature
-    entity_id: sensor.zigbee_office_r_temperature
-  # - min/max
-  - platform: template
-    id: current_heating_temperature_min
-    lambda: |-
-      float value = 25.0;
-      value = min(value, (float) id(kitchen_temperature).state);
-      //value = min(value, (float) id(room_temperature).state);
-      //value = min(value, (float) id(office_j_temperature).state);
-      //value = min(value, (float) id(bedroom_temperature).state);
-      return value;
-    update_interval: 60s
-  - platform: template
-    id: current_heating_temperature_max
-    lambda: |-
-      float value = 20.0;
-      value = max(value, (float) id(kitchen_temperature).state);
-      value = max(value, (float) id(room_temperature).state);
-      value = max(value, (float) id(office_j_temperature).state);
-      value = max(value, (float) id(bedroom_temperature).state);
-      return value;
-    update_interval: 60s
   - platform: template
     name: "Heater Total Daily Energy"
     id: heater_daily_energy
@@ -319,22 +257,22 @@ sensor:
     unit_of_measurement: '€'
     lambda: |-
       //# platba za odberne miesto        0,75          1,1
-      //# pevna mesacna zlozka tarify     0,15000000    0,1508 * 75 A
+      //# pevna mesacna zlozka tarify     0,15080000    0,1508 * 75 A
       
-      //## platba za systemove sluzby      0,00594340
-      //# platba za prevadzku systemu     0,02598800
-      //# variabilna zlozka tarify za distribuciu 0,00279200
-      //# platba za straty elktr.sidtr.el.        0,00687300
+      //## platba za systemove sluzby      0,00629760
+      //# platba za prevadzku systemu     0,01590000
+      //# variabilna zlozka tarify za distribuciu 0,00398400
+      //# platba za straty elktr.sidtr.el.        0,01146600
       //# odvod do jadroveho fondu        0,00327000
       //#
-      //# cena za elektrinu VT    0,06390000            0,10070000
-      //# cena za elektrinu NT    0,04110000            0,06700000
+      //# cena za elektrinu VT    0,06390000            0,10380000
+      //# cena za elektrinu NT    0,04110000            0,06900000
       //# 0.00594340+0.02598800+0.00279200+0.00687300+0.00327000+0.04110000 = 0.0859664
       //# prenos mesacne = 0,15080000*75
       //# prenos spotreba * (0,00398400+0,01146600+0,00327000+0,00629760+0,01590000) = spotreba * 0,0409176
 
-      // # 1,1 + (VT * 0,1007) + (NT * 0,067) + (75 * 0,1508) + ((VT+NT) * (0,00398400+0,01146600+0,00327000+0,00629760+0,01590000))
-      return (id(heater_daily_energy).state * (0.0409176 + 0.067));
+      // # 1,1 + (VT * 0,1038) + (NT * 0,069) + (75 * 0,1508) + ((VT+NT) * (0,00398400+0,01146600+0,00327000+0,00629760+0,01590000))
+      return (id(heater_daily_energy).state * (0.0409176 + 0.069));
   # L1
   - platform: pzemac
     #address: 161
@@ -498,14 +436,6 @@ binary_sensor:
     filters:
       - delayed_on: 300ms
       - delayed_off: 300ms
-  - platform: template
-    id: heating_fireplace_status
-    lambda: |-
-      if (id(current_heating_fireplace_temperature).state > 37.5) {
-        return true;
-      } else {
-        return false;
-      }
   - platform: template
     id: heater_alarm
     name: "Heater Alarm"
@@ -514,4 +444,25 @@ binary_sensor:
         return true;
       } else {
         return false;
-      }
+      }
+  - platform: homeassistant
+    id: trv_heating_demand
+    entity_id: binary_sensor.trv_heating_demand
+  - platform: homeassistant
+    id: heating_fireplace_fire
+    entity_id: binary_sensor.heating_fireplace_fire
+  - platform: template
+    id: request_heating_demand
+    name: "Request Heating Demand"
+    lambda: |-
+      if (id(trv_heating_demand).state && id(heating_enabled).state && !id(heating_fireplace_fire).state) {
+        return true;
+      } else {
+        return false;
+      }
+    on_press:
+      then:
+        - switch.turn_on: heating_demand
+    on_release:
+      then:
+        - switch.turn_off: heating_demand

mcu-kitchen.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: kitchen
   name: Kitchen
-  comment: "Kitchen: Kitchen Worktop and Stove Lights"
-  
+  area: Living Room / Kitchen
+  comment: "${area} | Kitchen Worktop and Stove Lights"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     # - priority: 600.0
@@ -29,8 +31,8 @@ esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml

mcu-lightening.yaml

@@ -2,10 +2,12 @@ substitutions:
   device: lightening
   name: Lightening detector
   name_short: Lightening
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | Lightening"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   
 esp32:
@@ -13,8 +15,8 @@ esp32:
   # board: m5stamp-pico
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: components
@@ -53,7 +55,6 @@ light:
     rgb_order: GRB
     pin: 27
     num_leds: 1
-    rmt_channel: 0
     chipset: ws2812
     restore_mode: ALWAYS_OFF
 

mcu-lvgl-eworkbench.yaml

@@ -0,0 +1,158 @@
+substitutions:
+  device: lvgl-eworkbench
+  name: Electronics Workbench Display
+  area: Office R
+  comment: "${area} | Electronics Workbench"
+
+esphome:
+  name: mcu-${device}
+  area: ${area}
+  comment: ${comment}
+  platformio_options:
+    upload_speed: 921600
+    build_unflags: -Werror=all
+    board_build.flash_mode: dio
+    board_build.f_flash: 80000000L
+    board_build.f_cpu: 240000000L
+
+esp32:
+  board: esp32-s3-devkitc-1
+  flash_size: 16MB
+  framework:
+    type: esp-idf
+    version: 5.3.1
+    platform_version: 6.9.0
+    sdkconfig_options:
+      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: y
+      CONFIG_ESP32S3_DATA_CACHE_64KB: y
+      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: y
+      CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
+      CONFIG_SPIRAM_RODATA: y
+
+packages:
+  common: !include common/common.yaml
+
+external_components:
+  #- source: github://buglloc/esphome-components
+  #- source:  github://Garag/esphome-components
+  - source:  github://clowrey/esphome-components
+    components: [axs15231]
+    refresh: 10min
+
+i2c:
+  sda: 4
+  scl: 8
+  id: touchscreen_bus
+
+psram:
+  mode: octal
+  speed: 120MHz
+  
+spi:
+  id: display_qspi
+  type: quad
+  clk_pin: 47
+  data_pins: [21, 48, 40, 39]
+    
+color:
+  - id: my_red
+    red: 100%
+    green: 0%
+    blue: 0%
+  - id: my_orange
+    red: 100%
+    green: 50%
+    blue: 0%
+  - id: my_yellow
+    red: 100%
+    green: 100%
+    blue: 0%
+  - id: my_green
+    red: 0%
+    green: 100%
+    blue: 0%
+  - id: my_blue
+    red: 0%
+    green: 0%
+    blue: 100%
+  - id: my_teal
+    red: 0%
+    green: 100%
+    blue: 100%
+  - id: my_gray
+    red: 70%
+    green: 70%
+    blue: 70%
+  - id: my_white
+    red: 100%
+    green: 100%
+    blue: 100%
+
+font:
+  - file: "gfonts://Roboto"
+    id: Roboto_48
+    size: 48
+  - file: "gfonts://Roboto"
+    id: Roboto_36
+    size: 36
+  - file: "gfonts://Roboto"
+    id: Roboto_24
+    size: 24
+  - file: "gfonts://Roboto"
+    id: Roboto_12
+    size: 12
+  - file: "gfonts://Roboto"
+    id: font_std
+    size: 40
+    glyphs: "!\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz/\\[]|&@#'"
+  - file: "gfonts://Roboto@700"
+    id: font_title
+    size: 40
+    glyphs: "!\"%()+=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz/\\[]|&@#'"
+
+globals:
+  - id: bgcolor
+    type: Color
+    initial_value: "Color::random_color()"
+
+display:
+  - platform: axs15231
+    data_rate: 40MHz #20mhz is default
+    #spi_mode: MODE2
+    id: main_display
+    spi_id: display_qspi
+    dimensions:
+      height: 480
+      width: 320
+    cs_pin: 45
+    backlight_pin: 1
+    brightness: 50
+    transform:
+      swap_xy: false
+    rotation: 90
+    auto_clear_enabled: false
+    show_test_card: true
+    lambda: |-
+      it.fill(id(bgcolor));
+      it.print(it.get_width()/2, it.get_height()/2-20, id(font_title), TextAlign::CENTER, "ESPHome");
+      it.print(it.get_width()/2, it.get_height()/2+20, id(font_std), TextAlign::CENTER, "@UTBDK");
+
+touchscreen:
+  - platform: axs15231
+    id: main_touch
+    display: main_display
+    i2c_id: touchscreen_bus
+    transform:
+      swap_xy: true
+    on_touch:
+      - lambda: |-
+          Color newColor;
+          do { newColor =  Color::random_color(); } while (newColor == id(bgcolor));
+          id(bgcolor) = newColor;
+
+          ESP_LOGI("cal", "x=%d, y=%d, x_raw=%d, y_raw=%0d",
+            touch.x,
+            touch.y,
+            touch.x_raw,
+            touch.y_raw
+          );

mcu-lvgl.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: lvgl
   name: LVGL
-  comment: "DEV"
-  
+  area: DEV
+  comment: "${area} | LVGL"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio

mcu-m5paper.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: m5paper
   name: M5Paper
-  comment: "DEV | m5paper"
-  
+  area: DEV
+  comment: "${area} | M5Paper"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:

mcu-mains-power.yaml

@@ -2,18 +2,20 @@ substitutions:
   device: mains-power
   name: Mains Power
   name_1: Mains
-  comment: "Room: Mains Power Monitoring"
-  
+  area: Room
+  comment: "${area} | Mains Power Monitoring"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
   
 packages:
   common: !include common/common.yaml

mcu-nspanel-bedroom.yaml

@@ -2,13 +2,16 @@ substitutions:
   device: nspanel-bedroom
   name: Bedroom NSPanel
   name_short: Bedroom
-  comment: "Bedroom NSPanel"
+  area: Bedroom
+  comment: "${area} | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
-  
+
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:

mcu-nspanel-dev.yaml

@@ -2,19 +2,23 @@ substitutions:
   device: nspanel-dev
   name: NSPanel DEV
   name_short: DevPanel
-  comment: "DEV | NSPanel"
+  area: DEV
+  comment: "${area} | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:
       - switch.turn_off: screen_power
       - delay: 1s
       - switch.turn_on: screen_power
+      - delay: 2s
+      - lambda: 'id(nspanel_id).set_display_dim(5, 80);'
 
   #   priority: -100
   #   then:
@@ -34,11 +38,17 @@ esp32:
     # platform_version: 6.6.0
 
 external_components:
+  # - source:
+  #     type: git
+  #     url: https://github.com/sairon/esphome-nspanel-lovelace-ui
+  #     ref: dev
+  #   refresh: 0s
+  #   components: [nspanel_lovelace]
   - source:
       type: git
-      url: https://github.com/sairon/esphome-nspanel-lovelace-ui
+      url: https://github.com/olicooper/esphome-nspanel-lovelace-native
       ref: dev
-    refresh: 0s
+    refresh: 3h
     components: [nspanel_lovelace]
   - source: github://pr#7942
     components: adc
@@ -69,95 +79,97 @@ api:
         message: string
         song: string
       then:
-        - lambda: 'id(nspanel_id).send_custom_command("notify~" + heading + "~" + message);'
+        - lambda: 'id(nspanel_id).notify_on_screensaver(heading, message, 10000);'
+        # - lambda: 'id(nspanel_id).send_custom_command("notify~" + heading + "~" + message);'
         - rtttl.play:
             rtttl: !lambda 'return song;'
-        - delay: 10s
-        - lambda: 'id(nspanel_id).send_custom_command("notify~~");'
+        # - delay: 10s
+        # - lambda: 'id(nspanel_id).send_custom_command("notify~~");'
 
-    - service: update_tft
-      then:
-        - lambda: |-
-            id(nspanel_id).upload_tft("${tft_url}");
+# DISABLED until https://github.com/olicooper/esphome-nspanel-lovelace-native/issues/20 is fixed
+    # - service: update_tft
+    #   then:
+    #     - lambda: |-
+    #         id(nspanel_id).upload_tft("${tft_url}");
             
-    - service: upload_tft
-      variables:
-        url: string
-      then:
-        - lambda: |-
-            id(nspanel_id).upload_tft(url);
+    # - service: upload_tft
+    #   variables:
+    #     url: string
+    #   then:
+    #     - lambda: |-
+    #         id(nspanel_id).upload_tft(url);
 
-    # Service to send a command directly to the display. Useful for testing
-    - service: send_command
-      variables:
-        cmd: string
-      then:
-        - lambda: "id(nspanel_id).send_custom_command(cmd.c_str());"
+    # # Service to send a command directly to the display. Useful for testing
+    # - service: send_command
+    #   variables:
+    #     cmd: string
+    #   then:
+    #     - lambda: "id(nspanel_id).send_custom_command(cmd.c_str());"
 
-    # Service to pusblish to mqtt used for refreshin the panel
-    - service: publish_to_recv_topic
-      variables:
-        cmd: string
-      then:
-        - mqtt.publish:
-            topic: $panel_recv_topic
-            payload: !lambda "return cmd;"
+    # # Service to pusblish to mqtt used for refreshin the panel
+    # - service: publish_to_recv_topic
+    #   variables:
+    #     cmd: string
+    #   then:
+    #     - mqtt.publish:
+    #         topic: $panel_recv_topic
+    #         payload: !lambda "return cmd;"
 
-    # Service to send a command wake the screen
-    - service: wake
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("wake");'
+    # # Service to send a command wake the screen
+    # - service: wake
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("wake");'
 
-    # Service to send a command to show screensaver (some of the values are hardcoded)
-    - service: show_screensaver
-      then:
-        - mqtt.publish:
-            topic: $panel_recv_topic
-            payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
+    # # Service to send a command to show screensaver (some of the values are hardcoded)
+    # - service: show_screensaver
+    #   then:
+    #     - mqtt.publish:
+    #         topic: $panel_recv_topic
+    #         payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
 
-    # Service to navigate to screen
-    - service: navigate_to_page
-      variables:
-        page: string
-      then:
-        - mqtt.publish_json:
-            topic: $panel_recv_topic
-            payload: |-
-              root["CustomRecv"] = "event,buttonPress2,navigate." + page + ",button";
+    # # Service to navigate to screen
+    # - service: navigate_to_page
+    #   variables:
+    #     page: string
+    #   then:
+    #     - mqtt.publish_json:
+    #         topic: $panel_recv_topic
+    #         payload: |-
+    #           root["CustomRecv"] = "event,buttonPress2,navigate." + page + ",button";
 
-    # Service to send a command disable screensaver
-    - service: disable_screensaver
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("timeout~0");'
+    # # Service to send a command disable screensaver
+    # - service: disable_screensaver
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("timeout~0");'
 
-    # Service to send a command enabled screensaver
-    - service: enable_screensaver
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("timeout~20");'
+    # # Service to send a command enabled screensaver
+    # - service: enable_screensaver
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("timeout~20");'
 
-    # Service to send a command wake the screen
-    - service: dim_0_to_100
-      variables:
-        intensity: string
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("dimmode~"+intensity+"~100");'
+    # # Service to send a command wake the screen
+    # - service: dim_0_to_100
+    #   variables:
+    #     intensity: string
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("dimmode~"+intensity+"~100");'
 
-    # Service to send a command To show the screen of a specific like
-    - service: show_entity
-      variables:
-        entity: string
-        title: string
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("pageType~popupLight~" + title + "~" + entity);'
+    # # Service to send a command To show the screen of a specific like
+    # - service: show_entity
+    #   variables:
+    #     entity: string
+    #     title: string
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("pageType~popupLight~" + title + "~" + entity);'
 
-    # Service to send a command To show the screen of a specific like
-    - service: notify_on_screensaver
-      variables:
-        line1: string
-        line2: string
-      then:
-        - lambda: 'id(nspanel_id).send_custom_command("notify~" + line1 + "~" + line2);'
-        # - rtttl.play: "short:d=4,o=5,b=100:16e6"
+    # # Service to send a command To show the screen of a specific like
+    # - service: notify_on_screensaver
+    #   variables:
+    #     line1: string
+    #     line2: string
+    #   then:
+    #     - lambda: 'id(nspanel_id).send_custom_command("notify~" + line1 + "~" + line2);'
+    #     # - rtttl.play: "short:d=4,o=5,b=100:16e6"
 
     # Service to send a command To show the screen of a specific like
     # interaction of the buttons are on implemented yet
@@ -167,14 +179,15 @@ api:
         description: string
         button1: string
         button2: string
-        timeout: string
+        timeout: int
         icon: string
       then:
+        - lambda: 'id(nspanel_id).notify_on_screensaver(title, description, timeout);'
         # show notification screen
-        - lambda: 'id(nspanel_id).send_custom_command("pageType~popupNotify");'
+        # - lambda: 'id(nspanel_id).send_custom_command("pageType~popupNotify");'
         # set values on notification screen
         # color defined as number created in binary and converted to decimal (rrrrggggbbbbaaaa)
-        - lambda: 'id(nspanel_id).send_custom_command("entityUpdateDetail~id~"+ title + "~65535~" + button1 +"~3840~" + button2 + "~61440~" + description + "~65535~" + timeout + "~3~" + icon + "~65535~");'
+        # - lambda: 'id(nspanel_id).send_custom_command("entityUpdateDetail~id~"+ title + "~65535~" + button1 +"~3840~" + button2 + "~61440~" + description + "~65535~" + timeout + "~3~" + icon + "~65535~");'
         - rtttl.play: "scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b"
 
 uart:
@@ -183,17 +196,226 @@ uart:
   rx_pin: 17
   baud_rate: 115200
 
-mqtt:
-  id: mqtt_client
-  broker: !secret mqtt_ip
-  username: !secret mqtt_username
-  password: !secret mqtt_password
-  discovery: false
-
 nspanel_lovelace:
   id: nspanel_id
-  mqtt_recv_topic: $panel_recv_topic
-  mqtt_send_topic: $panel_send_topic
+  sleep_timeout: 10
+  locale:
+    language: /config/esphome/nspanel/sk.json
+    temperature_unit: celcius
+  screensaver:
+    time_id: ha_time
+    time_format: '%H:%M~$name_day'
+    date_format: '%A, %d. %b. %Y'
+    weather:
+      entity_id: sensor.weather_forecast_daily
+    # type: screensaver2
+    # statusIcon1:
+    #   entity: switch.office_r_light
+    #   icon:
+    #     "on": mdi:sofa
+    #     "off": mdi:sofa
+    #   color:
+    #     "on": [255, 255, 255]
+    #     "off": [255, 255, 255]
+    # statusIcon2:
+    #   entity: light.office_r_desk_strip
+    #   icon:
+    #     "on": mdi:table-furniture
+    #     "off": mdi:table-furniture
+    #   color:
+    #     "on": [255, 255, 255]
+    #     "off": [255, 255, 255]
+    # entities:
+    #   - entity: sensor.weather_forecast_daily
+    #     color: [255, 255, 255]
+    #   - entity: delete
+    #   - entity: delete
+    #   - entity: delete
+    #   - entity: sensor.weather_forecast_daily
+    #     color: [255, 255, 255]
+    #     type: 0
+    #   - entity: sensor.weather_forecast_daily
+    #     color: [255, 255, 255]
+    #     type: 1
+    #   - entity: sensor.weather_forecast_daily
+    #     color: [255, 255, 255]
+    #     type: 2
+    #   - entity: sensor.weather_forecast_daily
+    #     color: [255, 255, 255]
+    #     type: 3
+    #   - entity: delete
+    #   - entity: sensor.zigbee_office_r_temperature
+    #     color: [255, 255, 255]
+    #     name: ""
+    #     icon: mdi:home-thermometer
+    #   - entity: switch.heating_relay_3
+    #     icon:
+    #       "on": mdi:radiator
+    #       "off": "text:"
+    #     color:
+    #       "on": [255, 255, 255]
+    #   - entity: binary_sensor.heating_fireplace_fire
+    #     icon:
+    #       "on": mdi:fireplace
+    #       "off": "text:"
+    #     color:
+    #       "on": [255, 255, 255]
+    #   - entity: delete
+    #   - entity: delete
+    #   - entity: delete
+  cards:
+    - type: cardGrid
+      title: Kuchyňa / Obývačka
+      entities:
+        - name: Kuchyňa
+          entity_id: light.kitchen
+          icon: ceiling-light
+        - name: Stôl
+          entity_id: light.dining_table
+          icon: ceiling-light
+        - name: Gauč
+          entity_id: light.living_room
+          icon: ceiling-light
+        - name: TV
+          entity_id: light.tv_light
+          icon: led-strip-variant
+        - name: (Stôl)
+          entity_id: light.dining_table_ambilight
+          icon: ceiling-light-multiple-outline
+        - name: (Gauč)
+          entity_id: light.living_room_ambilight
+          icon: ceiling-light-multiple-outline
+    - type: cardGrid
+      title: Romanko
+      entities:
+        - name: Svetlo
+          entity_id: switch.office_r_light
+          icon: wall-sconce-flat
+        - name: LED pásik
+          entity_id: light.office_r_desk_strip
+          icon: led-strip-variant
+        - entity_id: delete
+        - name: Monitor
+          entity_id: light.office_r_display_lamp
+          icon: monitor-star
+        - name: (Monitor)
+          entity_id: light.office_r_display_lamp_ambilight
+          icon: monitor-star
+        - name: Whitebox
+          entity_id: switch.whitebox
+    - type: cardGrid
+      title: Von
+      entities:
+        - name: Terasa
+          entity_id: light.patio_light
+          icon: lightbulb-group
+        - name: Terasa
+          entity_id: switch.patio_relay
+          icon: power-socket-fr
+        - name: Vzadu
+          entity_id: switch.outside_light_back
+          icon: light-flood-down
+        - name: Z. domček
+          entity_id: switch.shed_light
+          icon: wall-sconce-flat
+          # state_template: '{{ is_state("binary_sensor.shed_status", "off") }}'
+        - name: Z. domček
+          entity_id: switch.shed_socket
+          icon: power-socket-fr
+          # state_template: '{{ is_state("binary_sensor.shed_status", "off") }}'
+        - name: Záhrada
+          entity_id: switch.garden_light
+          icon: light-flood-down
+          # state_template: '{{ is_state("binary_sensor.shed_status", "off") }}'
+    - type: cardGrid
+      title: Brána
+      entities:
+        - name: Otvoriť
+          entity_id: button.gate_open
+          icon: gate-open
+        - name: Zatvoriť
+          entity_id: button.gate_close
+          icon: gate
+        - name: Automatizácia
+          entity_id: navigate.card_gate_automation
+    - type: cardGrid
+      title: Závlaha
+      entities:
+        - name: A1
+          entity_id: switch.irrigation_valve_a1
+          icon: valve
+        - name: A2
+          entity_id: switch.irrigation_valve_a2
+          icon: valve
+        - name: A3
+          entity_id: switch.irrigation_valve_a3
+          icon: valve
+        - name: A4
+          entity_id: switch.irrigation_valve_a4
+          icon: valve
+        - name: A5
+          entity_id: switch.irrigation_valve_a5
+          icon: valve
+        - name: Automatizácia
+          entity_id: navigate.card_irrigation_automation
+    - type: cardThermo
+      title: Kúrenie
+      thermo_entity_id: climate.bt_trv_office_r
+    # - type: cardQR
+    #   title: Guest Wifi
+    #   qr_text: "WIFI:T:WPA;S:LAB;P:slniecko;;"
+    #   # qrCode: "URL:https://www.johndoe.com/"
+    # #        entities:
+    # #          - entity_id: delete
+    # #          - entity_id: iText.LAB
+    # #            name: Name
+    # #            icon: wifi
+    # #          - entity_id: iText.slniecko
+    # #            name: Password
+    # #            icon: key
+    - type: cardEntities
+      title: Zwift
+      entities:
+        - name: Svetlo
+          entity_id: light.basement_light
+          icon: lightbulb-multiple
+        - name: LED
+          entity_id: light.exercise_room
+          icon: led-strip-variant
+        - name: Ventilátor
+          entity_id: light.exercise_room_fan
+          icon: fan
+        - name: Automatizácia
+          entity_id: navigate.card_exercise_automation
+    - type: cardEntities
+      title: Automatizácia
+      id: card_exercise_automation
+      hidden: true
+      entities:
+        - name: Start
+          entity_id: automation.zwift_enable_fan
+        - name: End
+          entity_id: automation.zwift_disable_fan
+    - type: cardEntities
+      title: Automatizácia
+      id: card_gate_automation
+      hidden: true
+      entities:
+        - name: Auto-otváranie
+          entity_id: switch.gate_auto_open
+        - name: Auto-zatváranie
+          entity_id: switch.gate_auto_close
+    - type: cardEntities
+      title: Automatizácia
+      id: card_irrigation_automation
+      hidden: true
+      entities:
+        - name: Ráno
+          entity_id: automation.irrigation_morning
+        - name: Terasa
+          entity_id: automation.irrigation_patio
+        - name: Rast trávy
+          entity_id: automation.irrigation_grow_grass
 
 time:
   - platform: homeassistant
@@ -240,12 +462,12 @@ switch:
     on_turn_on:
       # show a light on the panel when we swich on the light
       # - lambda: 'id(nspanel).send_custom_command("pageType~popupLight~[TITLE TO SHOW ON SCREEN]~[ENTITY NAME]");'
-      - lambda: 'id(nspanel_id).send_custom_command("pageType~popupLight~Light 1~light.bed_light");'
-    on_turn_off:
-      # send to screensaver when switch off the light
-      - mqtt.publish:
-          topic: $panel_recv_topic
-          payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
+      - lambda: 'id(nspanel_id).send_display_command("pageType~popupLight~Light 1~light.bed_light");'
+    # on_turn_off:
+    #   # send to screensaver when switch off the light
+    #   - mqtt.publish:
+    #       topic: $panel_recv_topic
+    #       payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
 
   - platform: gpio
     name: ${name} Relay 2
@@ -254,12 +476,12 @@ switch:
       number: 19
     on_turn_on:
       # show a light on the panel when we swich on the light
-      - lambda: 'id(nspanel_id).send_custom_command("pageType~popupLight~Light 2~light.bed_light2");'
-    on_turn_off:
-      # send to screensaver when switch off the light
-      - mqtt.publish:
-          topic: $panel_recv_topic
-          payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
+      - lambda: 'id(nspanel_id).send_display_command("pageType~popupLight~Light 2~light.bed_light2");'
+    # on_turn_off:
+    #   # send to screensaver when switch off the light
+    #   - mqtt.publish:
+    #       topic: $panel_recv_topic
+    #       payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
 
   # Turn screen power on/off. Easy way to configure the screen power control, but this should not be used from HA, as all components must be re-initialized afterwards. For lights, names of lights etc. this practically means that the state must change once to happen.
   - platform: gpio
@@ -300,6 +522,11 @@ sensor:
   - platform: template
     id: room_temperature_id
 
+text_sensor:
+  - platform: homeassistant
+    id: name_day
+    entity_id: sensor.nameday_sk
+
 # esp32_ble_tracker:
 #   scan_parameters:
 #     duration: 1min

mcu-nspanel-fireplace.yaml

@@ -2,13 +2,15 @@ substitutions:
   device: nspanel-fireplace
   name: Fireplace NSPanel
   name_short: Fireplace
-  comment: "Fireplace NSPanel"
+  area: Living Room / Kitchen
+  comment: "${area}, Fireplace | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:

mcu-nspanel-office-j.yaml

@@ -2,13 +2,16 @@ substitutions:
   device: nspanel-office-j
   name: Office J NSPanel
   name_short: Office J
-  comment: "Office J NSPanel"
+  area: Office J
+  comment: "${area} | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
-  
+
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:

mcu-nspanel-office-r.yaml

@@ -2,13 +2,16 @@ substitutions:
   device: nspanel-office-r
   name: Office R NSPanel
   name_short: Office R
-  comment: "Office R NSPanel"
+  area: Office R
+  comment: "${area} | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
-  
+
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:
@@ -20,6 +23,8 @@ esp32:
   board: nodemcu-32s
   framework:
     type: esp-idf
+wifi:
+  use_address: 10.17.241.212
 
 external_components:
   - source:
@@ -30,6 +35,9 @@ external_components:
   - source: github://pr#7942
     components: adc
     refresh: 0s
+  - source: github://pr#8325
+    components: mqtt
+    refresh: 0s
   - source: components
   
 packages:
@@ -174,6 +182,7 @@ mqtt:
   username: !secret mqtt_username
   password: !secret mqtt_password
   discovery: false
+  idf_send_async: true
 
 nspanel_lovelace:
   id: nspanel_id

mcu-nspanel-patio.yaml

@@ -2,13 +2,15 @@ substitutions:
   device: nspanel-patio
   name: Patio NSPanel
   name_short: Patio
-  comment: "Patio NSPanel"
+  area: Living Room / Kitchen
+  comment: "${area}, Patio | NSPanel"
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
-  
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     then:

mcu-office-r.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: office-r
   name: Office R
-  comment: "MS Teams presence"
+  area: Office R
+  comment: "${area} | MS Teams presence"
   
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
@@ -15,8 +17,8 @@ esp32:
   variant: esp32c3
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml

mcu-patio.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: patio
   name: Patio
-  comment: "Outside, Patio: On the back yard"
+  area: Outside
+  comment: "${area}, Patio | On the back yard"
   
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     # - priority: 600.0
@@ -29,8 +31,8 @@ esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml

mcu-rf433.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: rf433
   name: RF433 Bridge
-  comment: "Ground floor, Kitchen: RF433 Gateway"
-  
+  area: Living Room / Kitchen
+  comment: "${area}, Fireplace | RF433 Gateway"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-shed.yaml

@@ -1,18 +1,20 @@
 substitutions:
   device: shed
   name: Shed
-  comment: "Outside, Shed: Irrigation B"
+  area: Outside
+  comment: "${area}, Shed | Irrigation B"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml

mcu-socket-01.yaml

@@ -2,12 +2,14 @@ substitutions:
   device: socket-01
   device_id: socket_01
   name: Socket 01
+  area: Bedroom
+  comment: "${area} | TV Socket"
   current_res: "0.00290"
   voltage_div: "940"
-  comment: "First floor, Bedroom: TV"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-socket-02.yaml

@@ -2,12 +2,14 @@ substitutions:
   device: socket-02
   device_id: socket_02
   name: Socket 02
+  area: Bedroom
+  comment: "${area} | Bug Repelent Socket"
   current_res: "0.00290"
   voltage_div: "940"
-  comment: "First floor, Bedroom: Repelent"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-socket-03.yaml

@@ -2,6 +2,8 @@ substitutions:
   device: socket-03
   device_id: socket_03
   name: Socket 03
+  area: Bedroom
+  comment: "${area} | SPARE Socket"
   max_power: "3450"
   # <2020
   current_res: "0.00290"
@@ -11,12 +13,11 @@ substitutions:
   # current_res: "0.00117"
   # voltage_div: "755"
   # cf1_pin: GPIO04
-  comment: "First floor, Room R: Socket"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
-
 esp8266:
   board: esp01_1m
 

mcu-staircase-light.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: staircase-light
   name: Staircase Light
-  comment: "Staircase"
+  area: Staircase
+  comment: "${area} | Light"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-tft.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: tft
   name: TFT
-  comment: "Desk TFT Display"
-  
+  area: DEV
+  comment: "${area} | Desk TFT Display"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
@@ -15,18 +17,18 @@ esp32:
   variant: ESP32C3
   framework:
     type: esp-idf
-    version: 5.1.2
-    platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml
 
-external_components:
-  - source:
-      type: git
-      url: https://github.com/clydebarrow/esphome
-      ref: fd15094c0860df23d532881df36cfd16c7da1091 #previous commit - wont be needed in the future
-    components: [ lvgl ]
+# external_components:
+#   - source:
+#       type: git
+#       url: https://github.com/clydebarrow/esphome
+#       ref: fd15094c0860df23d532881df36cfd16c7da1091 #previous commit - wont be needed in the future
+#     components: [ lvgl ]
 
 logger:
   logs:
@@ -110,6 +112,7 @@ display:
     cs_pin: 7
     dc_pin: 8
     reset_pin: 10
+    invert_colors: false
     lambda: |-
       it.fill(Color::BLACK);
       it.print(0, 0, id(b612_12), id(my_white), TextAlign::TOP_LEFT, "HELLO WORLD!");

mcu-tv-light.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: tv-light
   name: TV Light
-  comment: "Ground floor, Living room: TV Rack Light"
-  
+  area: Living Room / Kitchen
+  comment: "${area}: TV Rack Light"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-vehicle-honda-pcx125.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: vehicle-honda-pcx125
   name: Vehicle Honda PCX125
-  comment: "BEACON | Honda PCX125"
-  
+  area: Outside
+  comment: "${area}, Beacon | Honda PCX125"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_loop:
     then:

mcu-vehicle-suzuki-dl650.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: vehicle-suzuki-dl650
   name: Vehicle Suzuki DL650
-  comment: "BEACON | Suzuki DL650"
-  
+  area: Outside
+  comment: "${area}, Beacon | Suzuki DL650"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_loop:
     then:

mcu-vehicle-toyota-auris-ts.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: vehicle-toyota-auris-ts
   name: Vehicle Toyota Auris TS
-  comment: "BEACON | Toyota Auris TS"
-  
+  area: Outside
+  comment: "${area}, Beacon | Toyota Auris TS"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_loop:
     then:
@@ -34,8 +36,8 @@ esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 external_components:
   - source: components

mcu-vehicle-toyota-yaris-cross.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: vehicle-toyota-yaris-cross
   name: Vehicle Toyota Yaris Cross
-  comment: "BEACON | Toyota Yaris Cross"
-  
+  area: Outside
+  comment: "${area}, Beacon | Toyota Yaris Cross"
+
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   on_loop:
     then:

mcu-waterproof-socket.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: waterproof-socket
   name: Waterproof Socket
-  comment: "Hardened remote controlled socket"
+  area: Basement
+  comment: "${area} | Hardened remote controlled socket"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
 
 esp8266:

mcu-well.yaml

@@ -1,10 +1,12 @@
 substitutions:
   device: well
   name: Well
-  comment: "Outside, Well: Irrigation A"
+  area: Outside
+  comment: "${area}, Well | Irrigation A"
 
 esphome:
   name: mcu-${device}
+  area: ${area}
   comment: ${comment}
   # friendly_name: mcu-well
   # on_boot:
@@ -24,8 +26,8 @@ esp32:
   board: m5stack-atom
   framework:
     type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.1
+    platform_version: 6.9.0
 
 packages:
   common: !include common/common.yaml

nspanel/sk.json

@@ -0,0 +1,108 @@
+{
+    "none": "Žiady",
+    "unknown": "Neznámy",
+    "preset_mode": "Prednastavený režim",
+    "swing_mode": "Režim oscilácie",
+    "fan_mode": "Režim ventilátora",
+    "activity": "Aktivita",
+    "away": "Preč",
+    "boost": "Boost",
+    "comfort": "Komfort",
+    "eco": "Eko",
+    "home": "Domov",
+    "sleep": "Spánok",
+    "cool": "Chladenie",
+    "cooling": "Chladí",
+    "dry": "Sušenie",
+    "drying": "Suší",
+    "fan": "Ventilátor",
+    "heat": "Kúrenie",
+    "heating": "Kúri",
+    "heat_cool": "Kúrenie/Chladenie",
+    "idle": "V kľude",
+    "auto": "Automatický",
+    "fan_only": "Len ventilátor",
+    "on": "Zapnuté",
+    "off": "Vypnuté",
+    "currently": "Aktuálne",
+    "state": "Stav",
+    "action": "Akcia",
+    "lock": "Zamknúť",
+    "unlock": "Odomknúť",
+    "paused": "Pozastavené",
+    "active": "Aktívne",
+    "activate": "Aktivovať",
+    "press": "Stlačiť",
+    "run": "Spustiť",
+    "speed": "Rýchlosť",
+    "brightness": "Jas",
+    "color": "Farba",
+    "color_temp": "Teplota farby",
+    "above_horizon": "Nad horizontom",
+    "below_horizon": "Pod horizontom",
+    "position": "Pozícia",
+    "tilt_position": "Náklon",
+    "start": "Štart",
+    "pause": "Pauza",
+    "cancel": "Zrušiť",
+    "finish": "Dokončiť",
+    "arm_home": "Arm (doma)",
+    "arm_away": "Arm (mimo domov)",
+    "arm_night": "Arm (noc)",
+    "arm_vacation": "Arm (dovolenka)",
+    "arm_custom_bypass": "Arm (bypass)",
+    "disarm": "Vypnúť zabezpečenie",
+    "disarming": "Vypínanie zabezpečenia",
+    "disarmed": "Zabezpečenie vypnuté",
+    "arming": "Zabezpečuje sa",
+    "pending": "Čekanie",
+    "triggered": "Poplach",
+    "armed_away": "Zabezpečené (mimo domov)",
+    "armed_home": "Zabezpečené (doma)",
+    "armed_night": "Zabezpečené (noc)",
+    "armed_vacation": "Zabezpečené (dovolenka)",
+    "armed_custom_bypass": "Zabezpečené (bypass)",
+    "not_home": "Mimo domov",
+    "start_cleaning": "Začať upratovať",
+    "return_to_base": "Späť na základňu",
+    "docked": "Zaparkované",
+    "turn_on": "Zapnúť",
+    "turn_off": "Vypnúť",
+    "month_january": "Január",
+    "month_jan": "Jan",
+    "month_february": "Február",
+    "month_feb": "Feb",
+    "month_march": "Marec",
+    "month_mar": "Mar",
+    "month_april": "Apríl",
+    "month_apr": "Apr",
+    "month_may": "Máj",
+    "month_june": "Jún",
+    "month_jun": "Jun",
+    "month_july": "Júl",
+    "month_jul": "Jul",
+    "month_august": "August",
+    "month_aug": "Aug",
+    "month_september": "September",
+    "month_sep": "Sep",
+    "month_october": "Október",
+    "month_oct": "Okt",
+    "month_november": "November",
+    "month_nov": "Nov",
+    "month_december": "December",
+    "month_dec": "Dec",
+    "dow_sunday": "Nedela",
+    "dow_sun": "Ne",
+    "dow_monday": "Pondelok",
+    "dow_mon": "Po",
+    "dow_tuesday": "Utorok",
+    "dow_tue": "Ut",
+    "dow_wednesday": "Streda",
+    "dow_wed": "St",
+    "dow_thursday": "Štvrtok",
+    "dow_thu": "Št",
+    "dow_friday": "Piatok",
+    "dow_fri": "Pi",
+    "dow_saturday": "Sobota",
+    "dow_sat": "So"
+}