Add .device-builder.json to gitignore

.gitignore

@@ -7,3 +7,4 @@
 /archive/
 /trash/
 .device-builder.yaml
+.device-builder.json

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+  "files.associations": {
+    "*.yaml": "esphome"
+  }
+}

common/ota_esp32.yaml

@@ -2,4 +2,4 @@
 ota:
   - platform: esphome
     password: !secret ota_password
-    # allow_partition_access: true
+    allow_partition_access: true

common/vehicle_base.yaml

@@ -1,5 +1,6 @@
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-air-office-r.yaml

@@ -4,7 +4,7 @@ substitutions:
   name: Office R Air
   name_short: Office R
   area: Office R
-  comment: "${area} | AirQ Monitoring"
+  comment: AirQ Monitoring
 
 esphome:
   name: mcu-${device}
@@ -14,6 +14,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-apollo-dev.yaml

@@ -0,0 +1,116 @@
+---
+substitutions:
+  device: apollo-dev #test
+  name: Apollo DEV #test
+  area: DEV
+  comment: --
+
+esphome:
+  name: mcu-${device} #test
+  friendly_name: ${name} #test
+  area: ${area}
+  comment: ${comment}
+
+esp32:
+  variant: esp32c6
+  flash_size: 8MB
+  framework:
+    type: esp-idf
+
+packages:
+  common: !include common/common.yaml
+
+api:
+  # https://github.com/granadaxronos/120-SONG_NOKIA_RTTTL_RINGTONE_PLAYER_FOR_ARDUINO_UNO/blob/master/RTTTL_PLAYER/songs.h
+  services:
+    - service: play_rtttl
+      variables:
+        song: string
+      then:
+        - rtttl.play:
+            rtttl: !lambda 'return song;'
+  
+switch:
+  - platform: gpio
+    id: accessory_power
+    internal: true
+    name: Accessory Power
+    pin: 4
+    restore_mode: ALWAYS_ON
+    setup_priority: 2000
+
+web_server:
+  version: "3"
+
+light:
+  - platform: esp32_rmt_led_strip
+    name: RGB LEDs
+    pin: 14
+    id: rgb_leds
+    chipset: WS2812
+    num_leds: 10
+    rgb_order: GRB
+    rmt_symbols: 48
+    effects:
+      # Use default parameters:
+      - random:
+      # Customize parameters
+      - random:
+          name: "My Slow Random Effect"
+          transition_length: 30s
+          update_interval: 30s
+      - random:
+          name: "My Fast Random Effect"
+          transition_length: 4s
+          update_interval: 5s
+      - addressable_rainbow:
+      - addressable_color_wipe:
+      - addressable_scan:
+      - addressable_twinkle:
+      - addressable_random_twinkle:
+      - addressable_fireworks:
+      - addressable_flicker:
+  - platform: esp32_rmt_led_strip
+    name: Onboard RGB LED
+    pin: 5
+    id: onboard_rgb_led
+    chipset: WS2812
+    num_leds: 1
+    rgb_order: GRB
+    rmt_symbols: 48
+
+output:
+  - platform: ledc
+    pin: 18
+    id: buzzer_output
+
+rtttl:
+  - output: buzzer_output
+    id: rtttl_player
+
+i2c:
+  - scl: 0
+    sda: 1
+    id: i2c_1
+
+sensor:
+  - platform: aht10
+    i2c_id: i2c_1
+    variant: AHT20
+    humidity:
+      name: Humidity
+      id: aht20_humidity
+      device_class: humidity
+      unit_of_measurement: "%"
+      accuracy_decimals: 2
+      force_update: false
+      state_class: measurement
+    temperature:
+      name: Temperature
+      id: aht20_temperature
+      device_class: temperature
+      unit_of_measurement: °C
+      accuracy_decimals: 2
+      force_update: false
+      state_class: measurement
+    id: aht20

mcu-atoms3.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: atoms3
   name: AtomS3
   area: DEV
-  comment: "${area} | --"
+  comment: --
 
 esphome:
   name: mcu-${device}
@@ -21,6 +21,7 @@ esphome:
 esp32:
   variant: esp32s3
   flash_size: 8MB
+  toolchain: esp-idf
   framework:
     type: esp-idf
 
@@ -207,7 +208,15 @@ output:
   - platform: gpio
     id: motor_in2
     pin: 2
+  - platform: ledc
+    pin: 16
+    id: gpio_tft_backlight
 
+light:
+  - platform: monochromatic
+    id: display_tft_backlight
+    output: gpio_tft_backlight
+    restore_mode: ALWAYS_ON
 
 switch:
   - platform: template
@@ -360,18 +369,19 @@ font:
     size: 12
 
 display:
-  - platform: st7789v
+  - platform: mipi_spi
+    model: ST7789V
     id: display_tft
-    model: Custom
+    dimensions:
       height: 128
       width: 128
       offset_height: 2
       offset_width: 1
-    backlight_pin: 16
+    # backlight_pin: 16
     cs_pin: 15
     dc_pin: 33
     reset_pin: 34
-    eightbitcolor: true
+    # eightbitcolor: true
     update_interval: 1s
     lambda: |-
       //Ingress shown animation Frame.

mcu-basement-2.yaml

@@ -4,7 +4,7 @@ substitutions:
   name_short: Basement
   name: Basement 2
   area: Basement
-  comment: "${area} | Lights"
+  comment: Lights
 
 esphome:
   name: mcu-${device}

mcu-basement.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: basement
   name: Basement
   area: Basement
-  comment: "${area} | Sockets"
+  comment: Sockets
 
 esphome:
   name: mcu-${device}

mcu-bedroom-lamp-left.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: bedroom-lamp-left
   name: Bedroom Lamp Left
   area: Bedroom
-  comment: "${area} | Left Lamp"
+  comment: Left Lamp
   default_transition_length: 800ms
 
 esphome:
@@ -14,6 +14,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     sdkconfig_options:
@@ -131,6 +132,7 @@ api:
 ota:
   platform: esphome
   password: !secret ota_password
+  allow_partition_access: true
   on_begin:
     then:
       - light.disco_on:

mcu-bedroom-lamp-right.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: bedroom-lamp-right
   name: Bedroom Lamp Right
   area: Bedroom
-  comment: "${area} | Right Lamp"
+  comment: Right Lamp
   default_transition_length: 800ms
 
 esphome:
@@ -14,6 +14,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     sdkconfig_options:
@@ -128,6 +129,7 @@ api:
 ota:
   platform: esphome
   password: !secret ota_password
+  allow_partition_access: true
   on_begin:
     then:
       - light.disco_on:

mcu-c6-test-1.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: c6-test-1
   name: C6 TEST 1
   area: DEV
-  comment: "${area} | C6"
+  comment: C6
 
 esphome:
   name: mcu-${device}
@@ -39,10 +39,9 @@ esphome:
 esp32:
   variant: esp32c6
   flash_size: 16MB
+  toolchain: esp-idf
   framework:
     type: esp-idf
-    # version: 5.4.2
-    # platform_version: 54.03.21
 
 logger:
   hardware_uart: USB_SERIAL_JTAG

mcu-c6-test-2.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: c6-test-2
   name: C6 TEST 2
   area: DEV
-  comment: "${area} | C6"
+  comment: C6
 
 esphome:
   name: mcu-${device}
@@ -39,10 +39,9 @@ esphome:
 esp32:
   variant: esp32c6
   flash_size: 16MB
+  toolchain: esp-idf
   framework:
     type: esp-idf
-    # version: 5.4.2
-    # platform_version: 54.03.21
 
 logger:
   hardware_uart: USB_SERIAL_JTAG

mcu-cam-1.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: cam-1
   name: Cam 1
   area: DEV
-  comment: "${area} | Camera"
+  comment: Camera
 
 esphome:
   name: mcu-${device}
@@ -12,8 +12,8 @@ esphome:
   comment: ${comment}
 
 esp32:
-  # board: esp32cam
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-can-node-1.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: can-node-1
   name: CAN Node 1
   area: DEV
-  comment: "${area} | CANopen"
+  comment: CANopen
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-can-node-2.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: can-node-2
   name: CAN Node 2
   area: DEV
-  comment: "${area} | CANopen"
+  comment: CANopen
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-cec-bedroom.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: cec-bedroom
   name: Bedroom TV
   area: Bedroom
-  comment: "${area} | CEC"
+  comment: CEC
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-clock-1.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: clock-1
   name: Clock 1
   area: Office R
-  comment: "${area} | Clock"
+  comment: Clock
 
 esphome:
   name: mcu-${device}
@@ -15,6 +15,7 @@ esphome:
 
 esp32:
   variant: esp32c3
+  toolchain: esp-idf
   framework:
     type: esp-idf
     # version: 5.4.2

mcu-clock-living-room.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: clock-living-room
   name: Living room Clock
   area: Living Room & Kitchen
-  comment: "${area}: TV Rack Clock"
+  comment: TV Rack Clock
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-desk-lamp.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: desk-lamp
   name: Desk Lamp
   area: Room
-  comment: "${area} | Desk lamp"
+  comment: Desk lamp
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-dimmer.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: dimmer
   name: Dimmer
   area: Basement
-  comment: "${area} | Pain cave fan"
+  comment: Pain cave fan
 
 esphome:
   name: mcu-${device}
@@ -28,10 +28,10 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 
-
 packages:
   common: !include common/common.yaml
 

mcu-echo-1.yaml

@@ -4,7 +4,7 @@ substitutions:
   name: Echo 1
   name_short: Echo 1
   area: DEV
-  comment: "${area} | Echo"
+  comment: Echo
 
 esphome:
   name: mcu-${device}

mcu-echo.yaml

@@ -4,7 +4,7 @@ substitutions:
   name: Echo
   name_short: Echo
   area: Office R
-  comment: "${area} | Speaker"
+  comment: Speaker
 
 esphome:
   name: mcu-${device}
@@ -14,6 +14,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 
@@ -101,7 +102,7 @@ speaker:
     dac_type: external
     i2s_dout_pin: 22
     channel: mono
-    sample_rate: 48000
+    sample_rate: 16000
     buffer_duration: 100ms  # Smaller buffer
   - platform: mixer
     id: mixer_speaker_id
@@ -127,6 +128,7 @@ media_player:
     id: media_out
     name: Player
     codec_support_enabled: false
+    buffer_size: 14000
     media_pipeline:
       speaker: media_spk_resampling_input
       # format: WAV

mcu-eworkbench.yaml

@@ -2,17 +2,20 @@
 substitutions:
   device: eworkbench
   name: Electronics Workbench
-  comment: "Office R | Electronics Workbench"
+  area: Office R
+  comment: Electronics Workbench
 
 esphome:
   name: mcu-${device}
   friendly_name: ${name}
+  area: ${area}
   comment: ${comment}
   platformio_options:
     board_build.flash_mode: dio
 
 esp32:
   variant: esp32c3
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-fireplace.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: fireplace
   name: Heating Fireplace
   area: Living Room & Kitchen
-  comment: "${area}, Fireplace | Fireplace monitoring for heating"
+  comment: Fireplace monitoring for heating
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-gate.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: gate
   name: Gate
   area: Outside
-  comment: "${area} | Gate"
+  comment: Gate
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 
@@ -142,7 +143,7 @@ binary_sensor:
       mode:
         input: true
     filters:
-      - delayed_on: 10ms
+      - delayed_on_off: 10ms
     entity_category: diagnostic
     on_multi_click:
       - timing:
@@ -154,15 +155,23 @@ binary_sensor:
           - logger.log: "OGI OFF => GATE CLOSED"
         invalid_cooldown: 100ms
       - timing:
-          - ON for at least 400ms
-          - OFF for at least 400ms
-          - ON for at least 400ms
-          - OFF for at least 400ms
+          - ON for at least 1500ms
+        then:
+          - select.set:
+              id: gate_state
+              option: Open
+          - logger.log: "OGI ON => GATE OPEN"
+        invalid_cooldown: 100ms
+      - timing:
+          - ON for 400ms to 500ms
+          - OFF for 400ms to 500ms
+          - ON for 400ms to 500ms
+          - OFF for 400ms to 500ms
         then:
           - select.set:
               id: gate_state
               option: Opening
-          - logger.log: "OGI SLOW BLINK => GATE OPENING"
+          - logger.log: "OGI SLOW BLINKING => GATE OPENING"
         invalid_cooldown: 100ms
       - timing:
           - ON for at most 300ms
@@ -173,15 +182,7 @@ binary_sensor:
           - select.set:
               id: gate_state
               option: Closing
-          - logger.log: "OGI FAST BLINK => GATE CLOSING"
-        invalid_cooldown: 100ms
-      - timing:
-          - ON for at least 1500ms
-        then:
-          - select.set:
-              id: gate_state
-              option: Open
-          - logger.log: "OGI ON => GATE OPEN"
+          - logger.log: "OGI FAST BLINKING => GATE CLOSING"
         invalid_cooldown: 100ms
 
 select:

mcu-gateway.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: gateway
   name: Gateway
   area: DEV
-  comment: "${area} | BLE Proxy, Modbus"
+  comment: BLE Proxy, Modbus
 
 esphome:
   name: mcu-${device}
@@ -13,16 +13,18 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   # Ethernet LLDP 802.1AB transmitter
-  - source: github://pr#11760
-    components: [ethernet]
-    refresh: 1h
+  # - source: github://pr#11760
+  #   components: [ethernet]
+  #   refresh: 1h
   - source: github://pr#2112
     components: ["m5stack_4relay"]
     refresh: 1h
@@ -52,22 +54,22 @@ i2c:
   scl: 16
   scan: true
 
-ethernet:
-  lldp:
-    # Enable LLDP transmission
-    #enabled: true
-    # Optional: override default port
-    port: eth
-    # Optional: override default system name
-    system_name: mcu-${device}
-    # Optional: override default system description
-    system_description: ${comment}
-    # Optional: override default "fast mode" burst packet count
-    tx_fast_count: 4
-    # Optional: override default LLDP frame transmission interval
-    tx_interval: 30
-    # Optional: override default hold count, used in conjuction with tx_interval to calculate overall TTL
-    tx_hold: 4
+# ethernet:
+#   lldp:
+#     # Enable LLDP transmission
+#     #enabled: true
+#     # Optional: override default port
+#     port: eth
+#     # Optional: override default system name
+#     system_name: mcu-${device}
+#     # Optional: override default system description
+#     system_description: ${comment}
+#     # Optional: override default "fast mode" burst packet count
+#     tx_fast_count: 4
+#     # Optional: override default LLDP frame transmission interval
+#     tx_interval: 30
+#     # Optional: override default hold count, used in conjuction with tx_interval to calculate overall TTL
+#     tx_hold: 4
 
 # ethernet:
 #   type: LAN8720

mcu-heater.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: heater
   name: Heater
   area: Basement
-  comment: "${area} | Hot water and Heating control"
+  comment: Hot water and Heating control
 
 esphome:
   name: mcu-${device}
@@ -23,6 +23,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-kitchen.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: kitchen
   name: Kitchen
   area: Living Room & Kitchen
-  comment: "${area} | Kitchen Worktop and Stove Lights"
+  comment: Kitchen Worktop and Stove Lights
 
 esphome:
   name: mcu-${device}
@@ -30,6 +30,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-lightening.yaml

@@ -4,7 +4,7 @@ substitutions:
   name: Lightening detector
   name_short: Lightening
   area: DEV
-  comment: "${area} | Lightening"
+  comment: Lightening
 
 esphome:
   name: mcu-${device}
@@ -14,6 +14,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-lvgl-eworkbench.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: lvgl-eworkbench
   name: Electronics Workbench Display
   area: Office R
-  comment: "${area} | Electronics Workbench"
+  comment: Electronics Workbench
 
 esphome:
   name: mcu-${device}
@@ -14,6 +14,7 @@ esphome:
 esp32:
   variant: esp32s3
   flash_size: 16MB
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-lvgl.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: lvgl
   name: LVGL
   area: DEV
-  comment: "${area} | LVGL"
+  comment: LVGL
 
 esphome:
   name: mcu-${device}
@@ -16,6 +16,7 @@ esphome:
 esp32:
   variant: esp32s3
   flash_size: 16MB
+  toolchain: esp-idf
   framework:
     type: esp-idf
     # Required to achieve sufficient PSRAM bandwidth

mcu-m5paper.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: m5paper
   name: M5Paper
   area: DEV
-  comment: "${area} | M5Paper"
+  comment: M5Paper
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-mains-power.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: mains-power
   name: Mains Power
   area: Room
-  comment: "${area} | Mains Power Monitoring"
+  comment: Mains Power Monitoring
 
 esphome:
   name: mcu-${device}
@@ -20,6 +20,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-nspanel-bedroom.yaml

@@ -4,7 +4,7 @@ substitutions:
   name: Bedroom NSPanel
   name_short: Bedroom
   area: Bedroom
-  comment: "${area} | NSPanel"
+  comment: NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -23,10 +23,12 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   - source:

mcu-nspanel-dev.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: nspanel-dev
   name: NSPanel DEV
   area: DEV
-  comment: "${area} | NSPanel"
+  comment: NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -33,10 +33,12 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
       include_builtin_idf_components:
         - esp_http_client
 

mcu-nspanel-fireplace.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: nspanel-fireplace
   name: Fireplace NSPanel
   area: Living Room & Kitchen
-  comment: "${area}, Fireplace | NSPanel"
+  comment: NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -21,10 +21,12 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   - source:

mcu-nspanel-office-j.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: nspanel-office-j
   name: Office J NSPanel
   area: Office J
-  comment: "${area} | NSPanel"
+  comment: NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -22,10 +22,12 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   - source:

mcu-nspanel-office-r.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: nspanel-office-r
   name: Office R NSPanel
   area: Office R
-  comment: "${area} | NSPanel"
+  comment: NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -22,11 +22,13 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
       enable_lwip_mdns_queries: true
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   - source:

mcu-nspanel-patio.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: nspanel-patio
   name: Patio NSPanel
   area: Living Room & Kitchen
-  comment: "${area}, Patio | NSPanel"
+  comment: ${area}, Patio | NSPanel
   panel_recv_topic: "tele/${device}/RESULT"
   panel_send_topic: "cmnd/${device}/CustomSend"
   tft_url: !secret tft_url
@@ -21,10 +21,12 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.0"
+      minimum_chip_revision: 3.0
+      sram1_as_iram: true
 
 external_components:
   - source:

mcu-office-r.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: office-r
   name: Office R
   area: Office R
-  comment: "${area} | MS Teams presence"
+  comment: MS Teams presence
 
 esphome:
   name: mcu-${device}
@@ -16,6 +16,7 @@ esphome:
 
 esp32:
   variant: esp32c3
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-patio.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: patio
   name: Patio
   area: Outside
-  comment: "${area}, Patio | On the back yard"
+  comment: Patio | On the back yard
 
 esphome:
   name: mcu-${device}
@@ -31,6 +31,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-pow-dishwasher.yaml

@@ -2,20 +2,24 @@
 substitutions:
   device: pow-dishwasher
   name: Dishwasher POW
-  comment: Living Room & Kitchen
+  area: Living Room & Kitchen
+  comment: Kitchen | Under sink
   update_interval: 10s
 
 esphome:
   name: mcu-${device}
   friendly_name: ${name}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.1"
+      minimum_chip_revision: 3.1
+      sram1_as_iram: true
 
 packages:
   common: !include common/common.yaml

mcu-pow-washer.yaml

@@ -2,20 +2,24 @@
 substitutions:
   device: pow-washer
   name: Washer POW
-  comment: Washroom
+  comment: 
+  area: Washroom
   update_interval: 10s
 
 esphome:
   name: mcu-${device}
   friendly_name: ${name}
+  area: ${area}
   comment: ${comment}
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     advanced:
-      minimum_chip_revision: "3.1"
+      minimum_chip_revision: 3.1
+      sram1_as_iram: true
 
 packages:
   common: !include common/common.yaml

mcu-rf.yaml

@@ -0,0 +1,65 @@
+---
+substitutions:
+  device: rf
+  name: RF Bridge
+  area: Living Room & Kitchen
+  comment: Fireplace | RF Gateway
+
+esphome:
+  name: mcu-${device}
+  friendly_name: ${name}
+  area: ${area}
+  comment: ${comment}
+
+esp32:
+  variant: esp32
+  flash_size: 4MB
+  framework:
+    type: esp-idf
+
+packages:
+  common: !include common/common.yaml
+
+spi:
+  clk_pin: 25
+  mosi_pin: 19
+  miso_pin: 22
+  
+cc1101:
+  cs_pin: 33
+  frequency: 433.92MHz
+  gdo0_pin:
+    number: 21
+    allow_other_uses: true
+
+infrared:
+  - platform: ir_rf_proxy
+    name: RF Proxy Transmitter
+    id: rf_proxy_tx
+    remote_transmitter_id: rf_tx
+    frequency: 433MHz
+  - platform: ir_rf_proxy
+    name: RF Proxy Receiver
+    id: rf_proxy_rx
+    remote_receiver_id: rf_rx
+    receiver_frequency: 433MHz
+     
+remote_receiver:
+  - id: rf_rx
+    pin:
+      number: 21
+      allow_other_uses: true
+    dump: all
+
+remote_transmitter:
+  - id: rf_tx
+    pin:
+      number: 21
+      allow_other_uses: true
+    carrier_duty_percent: 100%
+    on_transmit:
+      then:
+        - cc1101.begin_tx
+    on_complete:
+      then:
+        - cc1101.begin_rx

mcu-rf433.yaml

@@ -2,8 +2,8 @@
 substitutions:
   device: rf433
   name: RF433 Bridge
-  area: Living Room / Kitchen
-  comment: "${area}, Fireplace | RF433 Gateway"
+  area: Living Room & Kitchen
+  comment: Fireplace | RF433 Gateway
 
 esphome:
   name: mcu-${device}

mcu-rfid-reader.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: rfid-reader
   name: RFID Reader
   area: DEV
-  comment: "${area} | RFID Reader"
+  comment: RFID Reader
 
 esphome:
   name: mcu-${device}
@@ -29,6 +29,7 @@ esphome:
 
 esp32:
   variant: esp32s3
+  toolchain: esp-idf
   framework:
     type: esp-idf
 

mcu-shed.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: shed
   name: Shed
   area: Outside
-  comment: "${area}, Shed | Irrigation B"
+  comment: Shed | Irrigation B
 
 esphome:
   name: mcu-${device}
@@ -13,6 +13,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
     # version: 5.4.2

mcu-socket-01.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: socket-01
   name: Socket 01
   area: Bedroom
-  comment: "${area} | TV Socket"
+  comment: TV Socket
   current_res: "0.00290"
   voltage_div: "940"
 

mcu-socket-02.yaml

@@ -1,10 +1,9 @@
 ---
 substitutions:
   device: socket-02
-  device_id: socket_02
   name: Socket 02
   area: Bedroom
-  comment: "${area} | Bug Repelent Socket"
+  comment: Bug Repelent Socket
   current_res: "0.00290"
   voltage_div: "940"
 

mcu-socket-03.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: socket-03
   name: Socket 03
   area: Bedroom
-  comment: "${area} | SPARE Socket"
+  comment: SPARE Socket
   max_power: "3450"
   # <2020
   current_res: "0.00290"

mcu-staircase-light.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: staircase-light
   name: Staircase
   area: Staircase
-  comment: "${area} | Light"
+  comment: Light
 
 esphome:
   name: mcu-${device}

mcu-tracker.yaml

@@ -2,11 +2,13 @@
 substitutions:
   device: tracker
   name: Tracker
-  comment: "DEV | LTE GPS tracker"
+  area: DEV
+  comment: LTE GPS tracker
 
 esphome:
   name: mcu-${device}
   friendly_name: ${device}
+  area: ${area}
   comment: ${comment}
   on_boot:
     # priority: -10
@@ -83,9 +85,9 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf
-    # version: 5.3.2
     # platform_version: 53.03.11
 
 ## TESTING

mcu-tv-light.yaml

@@ -2,8 +2,8 @@
 substitutions:
   device: tv-light
   name: TV Light
-  area: Living Room / Kitchen
-  comment: "${area}: TV Rack Light"
+  area: Living Room & Kitchen
+  comment: TV Rack Light
 
 esphome:
   name: mcu-${device}

mcu-vehicle-honda-pcx125.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: vehicle-honda-pcx125
   name: Vehicle Honda PCX125
   area: Outside
-  comment: "${area}, Beacon | Honda PCX125"
+  comment: ${area}, Beacon | Honda PCX125
 
 esphome:
   name: mcu-${device}

mcu-vehicle-suzuki-dl650.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: vehicle-suzuki-dl650
   name: Vehicle Suzuki DL650
   area: Outside
-  comment: "${area}, Beacon | Suzuki DL650"
+  comment: ${area}, Beacon | Suzuki DL650
 
 esphome:
   name: mcu-${device}

mcu-vehicle-toyota-auris-ts.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: vehicle-toyota-auris-ts
   name: Vehicle Toyota Auris TS
   area: Outside
-  comment: "${area}, Beacon | Toyota Auris TS"
+  comment: ${area}, Beacon | Toyota Auris TS
 
 esphome:
   name: mcu-${device}

mcu-vehicle-toyota-yaris-cross.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: vehicle-toyota-yaris-cross
   name: Vehicle Toyota Yaris Cross
   area: Outside
-  comment: "${area}, Beacon | Toyota Yaris Cross"
+  comment: ${area}, Beacon | Toyota Yaris Cross
 
 esphome:
   name: mcu-${device}

mcu-waterproof-socket.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: waterproof-socket
   name: Waterproof Socket
   area: Basement
-  comment: "${area} | Hardened remote controlled socket"
+  comment: Hardened remote controlled socket
 
 esphome:
   name: mcu-${device}

mcu-well.yaml

@@ -3,7 +3,7 @@ substitutions:
   device: well
   name: Well
   area: Outside
-  comment: "${area}, Well | Irrigation A"
+  comment: Well | Irrigation A
 
 esphome:
   name: mcu-${device}
@@ -26,6 +26,7 @@ esphome:
 
 esp32:
   variant: esp32
+  toolchain: esp-idf
   framework:
     type: esp-idf