substitutions: device: echo-1 name: Echo 1 name_short: Echo 1 comment: "DEV" esphome: name: mcu-${device} comment: ${comment} esp32: board: m5stack-atom framework: type: arduino version: 2.0.14 platform_version: 6.5.0 # type: esp-idf # version: 5.1.2 # platform_version: 6.5.0 external_components: - source: components # - source: # type: git # url: https://github.com/nielsnl68/esphome # ref: nvds-RTTTL_I2S # components: [ speaker, rtttl ] # refresh: 0s - source: github://pr#5177 components: [ rtttl ] refresh: 0s packages: common: !include common/common.yaml api: services: # https://github.com/granadaxronos/120-SONG_NOKIA_RTTTL_RINGTONE_PLAYER_FOR_ARDUINO_UNO/blob/master/RTTTL_PLAYER/songs.h - service: play_rtttl variables: song: string then: - rtttl.play: rtttl: !lambda 'return song;' # i2c: # sda: 32 # scl: 26 # scan: true #false # frequency: 100kHz # uart: # id: particle_uart # tx_pin: 21 # rx_pin: 22 # baud_rate: 9600 binary_sensor: - platform: gpio name: ${name} Button pin: number: 39 inverted: true # on_press: # - voice_assistant.start: # on_release: # - voice_assistant.stop: on_double_click: - logger.log: Button Pressed - rtttl.play: "scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b" light: # - platform: status_led # id: status_led_id # output: status_led_output - platform: esp32_rmt_led_strip name: "${name} LED" id: neo_buildin rgb_order: GRB pin: 27 num_leds: 1 rmt_channel: 0 chipset: ws2812 # output: # - platform: template # id: status_led_output # type: binary # write_action: # - if: # condition: # lambda: return state > 0; # then: # - light.turn_on: # id: neo_buildin # red: 1.0 # green: 0.0 # blue: 0.0 # brightness: 100% # else: # - light.turn_off: # id: neo_buildin # # green: 0.0 # # red: 0.0 # # blue: 0.0 # # brightness: 30% i2s_audio: i2s_lrclk_pin: 33 i2s_bclk_pin: 19 media_player: - platform: i2s_audio id: media_out name: ${name} Player dac_type: external i2s_dout_pin: number: 22 allow_other_uses: true mode: mono speaker: - platform: i2s_audio id: echo_speaker dac_type: external i2s_dout_pin: number: 22 allow_other_uses: true mode: mono rtttl: id: my_rtttl speaker: echo_speaker microphone: - platform: i2s_audio id: echo_microphone i2s_din_pin: 23 adc_type: external pdm: true # voice_assistant: # microphone: echo_microphone # on_tts_end: # - media_player.play_media: # id: media_out # media_url: !lambda |- # return x;