---
substitutions:
  device: well
  name: Well
  area: Outside
  comment: Well | Irrigation A

esphome:
  name: mcu-${device}
  friendly_name: ${name}
  area: ${area}
  comment: ${comment}
  # friendly_name: mcu-well
  # on_boot:
  #   priority: -10
  #   then:
  #     - switch.turn_off: irrigation_relay_1
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_2
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_3
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_4
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_5

esp32:
  variant: esp32
  toolchain: esp-idf
  framework:
    type: esp-idf
    advanced:
      sram1_as_iram: true

packages:
  common: !include common/common.yaml

api:
  actions:
    - action: irrigation_morning
      then:
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_1
        - delay: 4minutes
        - switch.turn_off: irrigation_relay_1
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_1
        - delay: 4minutes
        - switch.turn_off: irrigation_relay_1
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_2
        - delay: 4minutes
        - switch.turn_off: irrigation_relay_2
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_2
        - delay: 4minutes
        - switch.turn_off: irrigation_relay_2
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_3
        - delay: 4minutes
        - switch.turn_off: irrigation_relay_3
        # - switch.turn_on: irrigation_relay_4
        # - delay: 40minutes
        # - switch.turn_off: irrigation_relay_4
    - action: irrigation_grass
      then:
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_1
        - delay: 5minutes
        - switch.turn_off: irrigation_relay_1
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_2
        - delay: 5minutes
        - switch.turn_off: irrigation_relay_2
        - delay: 2minutes
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_3
        - delay: 2minutes
        - switch.turn_off: irrigation_relay_3
    - action: irrigation_patio
      then:
        - lambda: |-
            id(relay_module).setup();
        - switch.turn_on: irrigation_relay_5
        - delay: 30sec
        - switch.turn_off: irrigation_relay_5

script:
  - id: modbus_turn_on_ch1
    mode: single
    then:
      - lambda: |-
          ESP_LOGD("modbus", "Sending Channel 0 ON command as byte array");
          // Channel 0 open command: [0x01, 0x05, 0x00, 0x00, 0xFF, 0x00, 0x8C, 0x3A]
          uint8_t data[8] = {0x01, 0x06, 0x00, 0x01, 0x01, 0x00, 0xD9, 0x9A};
          id(modbus_uart).write_array(data, 8);
  - id: modbus_turn_off_ch1
    mode: single
    then:
      - lambda: |-
          ESP_LOGD("modbus", "Sending Channel 0 OFF command as byte array");
          // Channel 0 close command: [0x01, 0x05, 0x00, 0x00, 0x00, 0x00, 0xCD, 0xCA]
          uint8_t data[8] = {0x01, 0x06, 0x00, 0x01, 0x02, 0x00, 0xD9, 0x6A};
          id(modbus_uart).write_array(data, 8);

i2c:
  sda: 25
  scl: 21
  scan: true

pca9554:
  - id: relay_module
    address: 0x27

uart:
  id: modbus_uart
  tx_pin: 23
  rx_pin: 33
  baud_rate: 9600
  data_bits: 8
  parity: NONE
  stop_bits: 1
  rx_buffer_size: 256

modbus:
  id: modbus_hub
  uart_id: modbus_uart

modbus_controller:
  - id: n4dig08
    address: 0x01
    modbus_id: modbus_hub
    setup_priority: -10

logger:
  level: DEBUG # Alebo VERY_VERBOSE, ak chceš vidieť úplne všetko
  logs:
    modbus: DEBUG
    modbus_controller: DEBUG

sprinkler:
  - id: lawn_sprinkler_ctrlr
    main_switch: "Irrigation A"
    auto_advance_switch: "Irrigation A Auto Advance"
    # reverse_switch: "Lawn Sprinklers Reverse"
    multiplier_number: "Irrigation A Multiplier"
    repeat_number: "Irrigation A Repeat"
    valve_open_delay: 2min
    valves:
      - valve_switch: "Irrigation A1"
        enable_switch: "Irrigation A1 Enable"
        run_duration_number: "Irrigation A1 Run Duration"
        valve_switch_id: irrigation_relay_1
      - valve_switch: "Irrigation A2"
        enable_switch: "Irrigation A2 Enable"
        run_duration_number: "Irrigation A2 Run Duration"
        valve_switch_id: irrigation_relay_2
      - valve_switch: "Irrigation A3"
        enable_switch: "Irrigation A3 Enable"
        run_duration_number: "Irrigation A3 Run Duration"
        valve_switch_id: irrigation_relay_3
      - valve_switch: "Irrigation A4"
        enable_switch: "Irrigation A4 Enable"
        run_duration_number: "Irrigation A4 Run Duration"
        valve_switch_id: irrigation_relay_4
      - valve_switch: "Irrigation A5"
        enable_switch: "Irrigation A5 Enable"
        run_duration_number: "Irrigation A5 Run Duration"
        valve_switch_id: irrigation_relay_5

switch:
  - platform: gpio
    name: "Irrigation Valve A1"
    id: irrigation_relay_1
    interlock: &interlock_group [irrigation_relay_1, irrigation_relay_2, irrigation_relay_3, irrigation_relay_4, irrigation_relay_5, irrigation_relay_6, irrigation_relay_7, irrigation_relay_8]
    pin:
      pca9554: relay_module
      number: 0
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A2"
    id: irrigation_relay_2
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 1
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A3"
    id: irrigation_relay_3
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 2
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A4"
    id: irrigation_relay_4
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 3
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A5"
    id: irrigation_relay_5
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 4
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A6"
    id: irrigation_relay_6
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 5
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A7"
    id: irrigation_relay_7
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 6
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A8"
    id: irrigation_relay_8
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 7
      mode: OUTPUT
  # - platform: gpio
  #   name: "${name} Relay 1"
  #   id: relay_1
  #   pin:
  #     number: 22
  #     mode: OUTPUT
  # - platform: gpio
  #   name: "${name} Relay 2"
  #   id: relay_2
  #   interlock: *interlock_group
  #   pin:
  #     number: 19
  #     mode: OUTPUT

valve:
  - platform: template
    name: "Irrigation Valve A1"
    lambda: |-
      if (id(irrigation_relay_1).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_1
    close_action:
      - switch.turn_off: irrigation_relay_1
  - platform: template
    name: "Irrigation Valve A2"
    lambda: |-
      if (id(irrigation_relay_2).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_2
    close_action:
      - switch.turn_off: irrigation_relay_2
  - platform: template
    name: "Irrigation Valve A3"
    lambda: |-
      if (id(irrigation_relay_3).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_3
    close_action:
      - switch.turn_off: irrigation_relay_3
  - platform: template
    name: "Irrigation Valve A4"
    lambda: |-
      if (id(irrigation_relay_4).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_4
    close_action:
      - switch.turn_off: irrigation_relay_4
  - platform: template
    name: "Irrigation Valve A5"
    lambda: |-
      if (id(irrigation_relay_5).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_5
    close_action:
      - switch.turn_off: irrigation_relay_5
  - platform: template
    name: "Irrigation Valve A6"
    lambda: |-
      if (id(irrigation_relay_6).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_6
    close_action:
      - switch.turn_off: irrigation_relay_6
  - platform: template
    name: "Irrigation Valve A7"
    lambda: |-
      if (id(irrigation_relay_7).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_7
    close_action:
      - switch.turn_off: irrigation_relay_7
  - platform: template
    name: "Irrigation Valve A8"
    lambda: |-
      if (id(irrigation_relay_8).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_8
    close_action:
      - switch.turn_off: irrigation_relay_8