---
# Hardware: IKEA VINDRIKTNING (modded) + M5Stack M5Stamp Pico
# Pinout:
#   GPIO21  PM1006 UART                -> particle_uart (uart tx_pin)
#   GPIO22  PM1006 UART                -> particle_uart (uart rx_pin)
#   GPIO25  TZT 8-bit WS2812 5050 stick (8 LEDs, 7 visible outside) -> NEO [neo] (light esp32_rmt_led_strip), also status
#   GPIO27  Onboard RGB LED (1x WS2812, inside), unused
#   GPIO32  Grove SDA                  -> i2c (i2c sda)
#   GPIO33  Grove SCL                  -> i2c (i2c scl)
substitutions:
  device: air-office-r
  name: Office R Air
  name_short: Office R
  area: Office R
  comment: AirQ Monitoring

esphome:
  name: mcu-${device}
  friendly_name: ${name}
  area: ${area}
  comment: ${comment}

esp32:
  variant: esp32
  toolchain: esp-idf
  framework:
    advanced:
      flash_chip: gd
    type: esp-idf

packages:
  common: !include common/common.yaml
  status_led: !include
    file: common/status_led.yaml
    vars:
      light_id: neo

i2c:
  # - id: i2c0
  sda: 32
  scl: 33
  scan: true #false
  frequency: 100kHz
  # - id: i2c1
  # sda: 25
  # scl: 22
  # scan: true #false

uart:
  id: particle_uart
  tx_pin: 21
  rx_pin: 22
  baud_rate: 9600

# binary_sensor:
#   - platform: gpio
#     # name: ${name} Button
#     pin:
#       number: 39
#       inverted: true

light:
  # also the status light (common/status_led.yaml): back to its previous state when all is fine
  - platform: esp32_rmt_led_strip
    name: NEO
    id: neo
    channel_colors: GRB
    pin: 25
    num_leds: 7  # 8 on the stick, the 8th one is hidden
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
      - random:
      - random:
          name: "My Slow Random Effect"
          transition_length: 30s
          update_interval: 30s
      - random:
          name: "My Fast Random Effect"
          transition_length: 4s
          update_interval: 5s
      - strobe:
      - strobe:
          name: Strobe Effect With Custom Values
          colors:
            - state: True
              brightness: 100%
              red: 100%
              green: 90%
              blue: 0%
              duration: 500ms
            - state: False
              duration: 250ms
            - state: True
              brightness: 100%
              red: 0%
              green: 100%
              blue: 0%
              duration: 500ms
      - flicker:
      - flicker:
          name: Flicker Effect With Custom Values
          alpha: 95%
          intensity: 1.5%
      - addressable_rainbow:
      - addressable_rainbow:
          name: Rainbow Effect With Custom Values
          speed: 10
          width: 50
      - addressable_scan:
      - addressable_scan:
          name: Scan Effect With Custom Values
          move_interval: 100ms

sensor:
  # https://blissair.com/what-is-pm-2-5.htm
  - platform: pm1006
    uart_id: particle_uart
    update_interval: 20s
    pm_2_5:
      name: Particulate Matter 2.5µm Concentration