substitutions:
  device: well
  name: Well
  area: Outside
  comment: "${area}, Well | Irrigation A"

esphome:
  name: mcu-${device}
  area: ${area}
  comment: ${comment}
  # friendly_name: mcu-well
  # on_boot:
  #   priority: -10
  #   then:
  #     - switch.turn_off: irrigation_relay_1
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_2
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_3
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_4
  #     - delay: 2s
  #     - switch.turn_off: irrigation_relay_5

esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
    version: 5.3.1
    platform_version: 6.9.0

packages:
  common: !include common/common.yaml

api:
  services:
    - service: irrigation_morning
      then:
        - switch.turn_on: irrigation_relay_1
        - delay: 10minutes
        - switch.turn_off: irrigation_relay_1
        - delay: 2minutes
        - switch.turn_on: irrigation_relay_2
        - delay: 10minutes
        - switch.turn_off: irrigation_relay_2
        - delay: 2minutes
        - switch.turn_on: irrigation_relay_3
        - delay: 3minutes
        - switch.turn_off: irrigation_relay_3
        - delay: 2minutes
        - switch.turn_on: irrigation_relay_3
        - delay: 3minutes
        - switch.turn_off: irrigation_relay_3
        # - switch.turn_on: irrigation_relay_4
        # - delay: 40minutes
        # - switch.turn_off: irrigation_relay_4
    - service: irrigation_grass
      then:
        - switch.turn_on: irrigation_relay_1
        - delay: 5minutes
        - switch.turn_off: irrigation_relay_1
        - delay: 2minutes
        - switch.turn_on: irrigation_relay_2
        - delay: 5minutes
        - switch.turn_off: irrigation_relay_2
        - delay: 2minutes
        - switch.turn_on: irrigation_relay_3
        - delay: 2minutes
        - switch.turn_off: irrigation_relay_3
    - service: irrigation_patio
      then:
        - switch.turn_on: irrigation_relay_5
        - delay: 30sec
        - switch.turn_off: irrigation_relay_5

i2c:
  sda: 25
  scl: 21
  scan: true

pca9554:
  - id: relay_module
    address: 0x27

sprinkler:
  - id: lawn_sprinkler_ctrlr
    main_switch: "Irrigation A"
    auto_advance_switch: "Irrigation A Auto Advance"
    # reverse_switch: "Lawn Sprinklers Reverse"
    multiplier_number: "Irrigation A Multiplier"
    repeat_number: "Irrigation A Repeat"
    valve_open_delay: 2min
    valves:
      - valve_switch: "Irrigation A1"
        enable_switch: "Irrigation A1 Enable"
        run_duration_number: "Irrigation A1 Run Duration"
        valve_switch_id: irrigation_relay_1
      - valve_switch: "Irrigation A2"
        enable_switch: "Irrigation A2 Enable"
        run_duration_number: "Irrigation A2 Run Duration"
        valve_switch_id: irrigation_relay_2
      - valve_switch: "Irrigation A3"
        enable_switch: "Irrigation A3 Enable"
        run_duration_number: "Irrigation A3 Run Duration"
        valve_switch_id: irrigation_relay_3
      - valve_switch: "Irrigation A4"
        enable_switch: "Irrigation A4 Enable"
        run_duration_number: "Irrigation A4 Run Duration"
        valve_switch_id: irrigation_relay_4
      - valve_switch: "Irrigation A5"
        enable_switch: "Irrigation A5 Enable"
        run_duration_number: "Irrigation A5 Run Duration"
        valve_switch_id: irrigation_relay_5

switch:
  - platform: gpio
    name: "Irrigation Valve A1"
    id: irrigation_relay_1
    interlock: &interlock_group [irrigation_relay_1, irrigation_relay_2, irrigation_relay_3, irrigation_relay_4, irrigation_relay_5, irrigation_relay_6, irrigation_relay_7, irrigation_relay_8]
    pin:
      pca9554: relay_module
      number: 0
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A2"
    id: irrigation_relay_2
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 1
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A3"
    id: irrigation_relay_3
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 2
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A4"
    id: irrigation_relay_4
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 3
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A5"
    id: irrigation_relay_5
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 4
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A6"
    id: irrigation_relay_6
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 5
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A7"
    id: irrigation_relay_7
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 6
      mode: OUTPUT
  - platform: gpio
    name: "Irrigation Valve A8"
    id: irrigation_relay_8
    interlock: *interlock_group
    pin:
      pca9554: relay_module
      number: 7
      mode: OUTPUT
  # - platform: gpio
  #   name: "${name} Relay 1"
  #   id: relay_1
  #   pin:
  #     number: 22
  #     mode: OUTPUT
  # - platform: gpio
  #   name: "${name} Relay 2"
  #   id: relay_2
  #   interlock: *interlock_group
  #   pin:
  #     number: 19
  #     mode: OUTPUT

valve:
  - platform: template
    name: "Irrigation Valve A1"
    lambda: |-
      if (id(irrigation_relay_1).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_1
    close_action:
      - switch.turn_off: irrigation_relay_1
  - platform: template
    name: "Irrigation Valve A2"
    lambda: |-
      if (id(irrigation_relay_2).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_2
    close_action:
      - switch.turn_off: irrigation_relay_2
  - platform: template
    name: "Irrigation Valve A3"
    lambda: |-
      if (id(irrigation_relay_3).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_3
    close_action:
      - switch.turn_off: irrigation_relay_3
  - platform: template
    name: "Irrigation Valve A4"
    lambda: |-
      if (id(irrigation_relay_4).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_4
    close_action:
      - switch.turn_off: irrigation_relay_4
  - platform: template
    name: "Irrigation Valve A5"
    lambda: |-
      if (id(irrigation_relay_5).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_5
    close_action:
      - switch.turn_off: irrigation_relay_5
  - platform: template
    name: "Irrigation Valve A6"
    lambda: |-
      if (id(irrigation_relay_6).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_6
    close_action:
      - switch.turn_off: irrigation_relay_6
  - platform: template
    name: "Irrigation Valve A7"
    lambda: |-
      if (id(irrigation_relay_7).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_7
    close_action:
      - switch.turn_off: irrigation_relay_7
  - platform: template
    name: "Irrigation Valve A8"
    lambda: |-
      if (id(irrigation_relay_8).state) {
        return VALVE_OPEN;
      } else {
        return VALVE_CLOSED;
      }
    open_action:
      - switch.turn_on: irrigation_relay_8
    close_action:
      - switch.turn_off: irrigation_relay_8

time:
  - !include common/time/homeassistant.yaml