---
# Hardware: BlitzWolf BW-SHP2/SHP6
# Pinout:
#   GPIO0   GPIO_LED1_INV Red LED (inverted), Power Status -> led_red (output gpio)
#   GPIO1   GPIO_USER RXD, Optional sensor
#   GPIO2   GPIO_LEDLNK_INV Blue LED (inverted), Link Status -> led_blue (output gpio)
#   GPIO3   GPIO_USER TXD, Optional sensor
#   GPIO5   GPIO_HJL_CF BL0937 or HJL-01 CF power -> sensor/hlw8012 (sensor hlw8012 cf_pin)
#   GPIO12  GPIO_NRG_SEL_INV BL0937 or HJL-01 Sel output (0 = Voltage) -> sensor/hlw8012 (sensor hlw8012 sel_pin) (inverted)
#   GPIO13  GPIO_KEY1 Button           -> Button (binary_sensor gpio) (inverted)
#   GPIO14  GPIO_NRG_CF1 BL0937 or HJL-01 CF1 current / voltage -> sensor/hlw8012 (sensor hlw8012 cf1_pin)
#   GPIO15  GPIO_REL1 Relay            -> Relay (switch gpio)
substitutions:
  device: socket-01
  name: Socket 01
  area: Bedroom
  comment: TV Socket
  current_res: "0.00290"
  voltage_div: "940"

esphome:
  name: mcu-${device}
  friendly_name: ${name}
  area: ${area}
  comment: ${comment}

esp8266:
  board: esp01_1m

packages:
  common: !include common/common_esp8266.yaml

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13
      mode: INPUT_PULLUP
      inverted: yes
    name: Button
    # filters:
    #   invert:
    on_press:
      # min_length: 50ms
      # max_length: 350ms
      then:
        - switch.toggle: relay
    on_double_click:
      # min_length: 50ms
      # max_length: 350ms
      then:
        - switch.turn_on: relay
        - light.turn_on: light_blue
        - delay: 2h
        - switch.turn_off: relay
        - light.turn_off: light_blue
output:
  - platform: gpio
    pin: GPIO00
    id: led_red
    inverted: True
  - platform: gpio
    pin: GPIO02
    id: led_blue
    inverted: True

light:
  - platform: binary
    name: Red LED
    id: light_red
    output: led_red
  - platform: binary
    name: Blue LED
    id: light_blue
    output: led_blue

sensor:
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: true
    cf_pin: GPIO05
    cf1_pin: GPIO14
    current_resistor: ${current_res}
    voltage_divider: ${voltage_div}
    current:
      name: Current
      icon: mdi:flash-circle
      accuracy_decimals: 3
    voltage:
      name: Voltage
      icon: mdi:current-ac
    power:
      name: Power
      id: power
      icon: mdi:flash-outline
    update_interval: 30s
    change_mode_every: 4
  - platform: total_daily_energy
    name: Total Daily Power"
    power_id: power
    filters:
      # Multiplication factor from W to kW is 0.001
      - multiply: 0.001
    unit_of_measurement: kWh
    icon: mdi:circle-slice-3

switch:
  - platform: gpio
    name: Relay
    # icon: mdi:power-socket-eu
    pin: GPIO15
    id: relay
    on_turn_on:
      - light.turn_on: light_red
    on_turn_off:
      - light.turn_off: light_red

# status_led:
#   pin:
#     number: GPIO00
#     inverted: True

# time:
#   - platform: homeassistant
#     timezone: Europe/Bratislava
#     on_time:
#       # Switch on on the hour
#       - seconds: 0
#         minutes: /15
#         hours: "*"
#         then:
#           - switch.turn_on: relay_1
#           - delay: 12min
#           - switch.turn_off: relay_1