substitutions:
  device: rf433
  name: RF433 Bridge
  area: Living Room / Kitchen
  comment: "${area}, Fireplace | RF433 Gateway"

esphome:
  name: mcu-${device}
  friendly_name: ${name}
  area: ${area}
  comment: ${comment}

esp8266:
  board: esp01_1m

packages:
  common: !include common/common_esp8266.yaml

remote_receiver:
  pin: 4
  dump: rc_switch
  filter: 100us
  idle: 2ms
  tolerance: 50%

remote_transmitter:
  pin: 5
  carrier_duty_percent: 100%

binary_sensor:
# Key Fob remote
# A: 011110110011101010100010
# B: 011110110011101010101000
# C: 011110110011101010100001
# D: 011110110011101010100100
  - platform: remote_receiver
    name: "Keyfob Remote Button A"
    rc_switch_raw:
      code: '011110110011101010100010'
      protocol: 1
    filters:
      - delayed_off: 500ms
  - platform: remote_receiver
    name: "Keyfob Remote Button B"
    rc_switch_raw:
      code: '011110110011101010101000'
      protocol: 1
    filters:
      - delayed_off: 500ms
  - platform: remote_receiver
    name: "Keyfob Remote Button C"
    rc_switch_raw:
      code: '011110110011101010100001'
      protocol: 1
    filters:
      - delayed_off: 500ms
  - platform: remote_receiver
    name: "Keyfob Remote Button D"
    rc_switch_raw:
      code: '011110110011101010100100'
      protocol: 1
    filters:
      - delayed_off: 500ms

status_led:
  pin:
    number: GPIO13
    inverted: yes

# switch:
  # - platform: remote_transmitter
  #   name: "Remote Fan Control"
  #   rc_switch_raw:
  #     code: '100000000001010000000010'
  #     protocol: 1
  #   repeat: 3