---
# Hardware: Nordic nRF52840 DK
# Pinout:
#   P0.11   Button 1 (active low)      -> Button 1 (binary_sensor gpio)
#   P0.12   Button 2 (active low)      -> Button 2 (binary_sensor gpio)
#   P0.13   LED 1 (active low)         -> LED 1 (light binary)
#   P0.14   LED 2 (active low)         -> LED 2 (light binary)
#   P0.15   LED 3 (active low)         -> LED 3 (light binary)
#   P0.16   LED 4 (active low)         -> LED 4 (light binary)
#   P0.24   Button 3 (active low)      -> Button 3 (binary_sensor gpio)
#   P0.25   Button 4 (active low)      -> Button 4 (binary_sensor gpio)
#   P1.01   UART1 RX                   <- mcu-nrf-ant UART1 TX (P1.01), packet_transport; plus GND
esphome:
  name: mcu-nrf-dk
  friendly_name: nRF DK

# needs the esphomeplatformzephyr fork (esphome-zephyr), upstream has no zephyr: platform yet
zephyr:
  variant: NRF52
  board: nrf52840dk/nrf52840
  framework:
    type: zephyr

logger:

network:
  enable_ipv6: true

# Active dataset of the Thread network (HA: Settings > Thread > ... > dataset TLV)
openthread:
  tlv: !secret thread_tlv
  # end device, doesn't route for others; saves flash (FTD fills the MCUboot slot)
  device_type: MTD

api:
  encryption:
    key: !secret api_key

# ANT+ values from mcu-nrf-ant (second nRF52840 DK) over UART
uart:
  id: ant_link
  port: UART1
  rx_pin: P1.01
  baud_rate: 115200

packet_transport:
  - platform: uart
    uart_id: ant_link
    providers:
      - name: mcu-nrf-ant

sensor:
  - platform: packet_transport
    provider: mcu-nrf-ant
    remote_id: heart_rate
    name: Heart Rate
    internal: false
    filters:
      - throttle: 1s

output:
  - platform: gpio
    id: led_1_out
    pin: {number: P0.13, inverted: true}
  - platform: gpio
    id: led_2_out
    pin: {number: P0.14, inverted: true}
  - platform: gpio
    id: led_3_out
    pin: {number: P0.15, inverted: true}
  - platform: gpio
    id: led_4_out
    pin: {number: P0.16, inverted: true}

light:
  - {platform: binary, name: LED 1, id: led_1, output: led_1_out}
  - {platform: binary, name: LED 2, id: led_2, output: led_2_out}
  - {platform: binary, name: LED 3, id: led_3, output: led_3_out}
  - {platform: binary, name: LED 4, id: led_4, output: led_4_out}

# each button toggles its LED locally and is visible in HA
binary_sensor:
  - platform: gpio
    name: Button 1
    pin: {number: P0.11, inverted: true, mode: {input: true, pullup: true}}
    on_press: {light.toggle: led_1}
  - platform: gpio
    name: Button 2
    pin: {number: P0.12, inverted: true, mode: {input: true, pullup: true}}
    on_press: {light.toggle: led_2}
  - platform: gpio
    name: Button 3
    pin: {number: P0.24, inverted: true, mode: {input: true, pullup: true}}
    on_press: {light.toggle: led_3}
  - platform: gpio
    name: Button 4
    pin: {number: P0.25, inverted: true, mode: {input: true, pullup: true}}
    on_press: {light.toggle: led_4}