---
# Hardware: IKEA VINDRIKTNING (modded) + M5Stack M5Stamp Pico
# Pinout:
#   GPIO21  PM1006 UART                -> particle_uart (uart tx_pin)
#   GPIO22  PM1006 UART                -> particle_uart (uart rx_pin)
#   GPIO25  TZT 8-bit WS2812 5050 stick (8 LEDs, 7 visible outside; LEDs 1-7 broken), disabled
#   GPIO27  Onboard RGB LED (1x WS2812, inside), unused
#   GPIO32  Grove SDA                  -> i2c (i2c sda)
#   GPIO33  Grove SCL                  -> i2c (i2c scl)
substitutions:
  device: air-office-r
  name: Office R Air
  name_short: Office R
  area: Office R
  comment: AirQ Monitoring

esphome:
  name: mcu-${device}
  friendly_name: ${name}
  area: ${area}
  comment: ${comment}

esp32:
  variant: esp32
  toolchain: esp-idf
  framework:
    type: esp-idf

packages:
  common: !include common/common.yaml

i2c:
  # - id: i2c0
  sda: 32
  scl: 33
  scan: true #false
  frequency: 100kHz
  # - id: i2c1
  # sda: 25
  # scl: 22
  # scan: true #false

uart:
  id: particle_uart
  tx_pin: 21
  rx_pin: 22
  baud_rate: 9600

# binary_sensor:
#   - platform: gpio
#     # name: ${name} Button
#     pin:
#       number: 39
#       inverted: true

# LEDs disabled until the stick is fixed (LEDs after the first one light up randomly)
# light:
#   # only the first LED of the stick: the rest get garbage (broken DOUT after LED 0)
#   - platform: esp32_rmt_led_strip
#     name: NEO
#     id: neo
#     channel_colors: GRB
#     pin: 25
#     num_leds: 1
#     chipset: ws2812
#     restore_mode: ALWAYS_OFF
#     effects:
#       - random:
#       - random:
#           name: "My Slow Random Effect"
#           transition_length: 30s
#           update_interval: 30s
#       - random:
#           name: "My Fast Random Effect"
#           transition_length: 4s
#           update_interval: 5s
#       - strobe:
#       - strobe:
#           name: Strobe Effect With Custom Values
#           colors:
#             - state: True
#               brightness: 100%
#               red: 100%
#               green: 90%
#               blue: 0%
#               duration: 500ms
#             - state: False
#               duration: 250ms
#             - state: True
#               brightness: 100%
#               red: 0%
#               green: 100%
#               blue: 0%
#               duration: 500ms
#       - flicker:
#       - flicker:
#           name: Flicker Effect With Custom Values
#           alpha: 95%
#           intensity: 1.5%
#       - addressable_rainbow:
#       - addressable_rainbow:
#           name: Rainbow Effect With Custom Values
#           speed: 10
#           width: 50
#       - addressable_scan:
#       - addressable_scan:
#           name: Scan Effect With Custom Values
#           move_interval: 100ms

sensor:
  # https://blissair.com/what-is-pm-2-5.htm
  - platform: pm1006
    uart_id: particle_uart
    update_interval: 20s
    pm_2_5:
      name: Particulate Matter 2.5µm Concentration