substitutions:
  device: atoms3
  name: AtomS3
  area: DEV
  comment: "${area} | --"

esphome:
  name: mcu-${device}
  area: ${area}
  comment: ${comment}
  platformio_options:
    board_build.flash_mode: dio
  # on_boot:
  #   - priority: 800
  #     then:
  #       - lambda: |-
  #           id(display_tft).enable();
  #           id(display_tft).transfer_byte(0x11);
  #           id(display_tft).disable();
  
esp32:
  board: esp32-s3-devkitc-1
  # board: m5stack-atoms3
  flash_size: 8MB
  framework:
    type: esp-idf
    # version: dev
    # version: 5.1.2
    # platform_version: 6.6.0
    version: 5.3.3
    platform_version: 53.03.12
    # type: arduino

pcf8574:
  - id: 'pcf8574_hub'
    address: 0x21
    pcf8575: true

animation:
  - file: "blinky.gif"
    id: blinky
    resize: 128x128
    type: RGB565
  - file: "vault_boy_walking.gif"
    id: vaultboy
    resize: 168x121
    type: RGB565

logger:
  logs:
    component: ERROR 

web_server:
  port: 80
  version: 3

light:
  - platform: esp32_rmt_led_strip
    name: "${name} LED"
    id: neo
    rgb_order: GRB
    pin: 2
    num_leds: 1
    # rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF

text:
  - platform: template
    name: "${name} Test Text"
    # id: "it_2"
    icon: "mdi:text"
    optimistic: true
    internal: false
    initial_value: "Welcome ESPHOME"
    restore_value: true
    mode: text
    # max_restore_data_length: 24

# logger:
#   hardware_uart: USB_SERIAL_JTAG

external_components:
  - source: github://pr#7234
    components: m5stack_4relay
    refresh: 0s
  # - source: github://pr#5586
  #   components: [ http_request ]
  # - source: github://mknjc/esphome@ds248x
  #   components: ds248x
  # - source: github://bekriebel/esphome@sh1107_fix
  #   components:
  #     - ssd1306_base
  #     - ssd1306_i2c
  #     - ssd1306_spi
  # - source: github://pr#5096
  #   refresh: 0s
  # - source: github://pr#3500
  #   refresh: 0s
  #   components:
  #     - web_server
  #     - web_server_idf
  #     - web_server_base
  #     - captive_portal

# ota:
#   - platform: http_request

# web_server:
# captive_portal:

packages:
  common: !include common/common.yaml
  # common: !include common/common_wo_debug.yaml
  # common: !include common/common_dev.yaml

canbus:
  - platform: esp32_can
    rx_pin: 6
    tx_pin: 5
    can_id: 4
    # bit_rate: 500kbps
    bit_rate: 1000KBPS
    use_extended_id: true
    on_frame:
    - can_id: 0x123
      use_extended_id: true
      then:
      - lambda: |-
          std::string b(x.begin(), x.end());
          ESP_LOGD("can extended id 0x123", "%s", &b[0] );
    - can_id: 0x123
      then:
      - lambda: |-
          std::string b(x.begin(), x.end());
          ESP_LOGD("can standard id 0x123", "%s", &b[0] );
    - can_id: 0x3f1
      can_id_mask: 0x7ff
      use_extended_id: false
      then:
      - lambda: |-
          std::string b(x.begin(), x.end());
          ESP_LOGD("can id 0x03f1", "%s", &b[0] );
    - can_id: 0x108
      use_extended_id: false
      then:
      - lambda: |-
          std::string b(x.begin(), x.end());
          ESP_LOGD("can id 0x108", "%s", &b[0] );
    - can_id: 0x109
      use_extended_id: false
      then:
      - lambda: |-
          std::string b(x.begin(), x.end());
          ESP_LOGD("can id 0x109", "%s", &b[0] );

i2c:
  # - id: i2c_groove
  #   sda: 2
  #   scl: 1
  #   scan: true
  - id: i2c_main
    sda: 38
    scl: 39
    scan: true
    frequency: 800kHz

# mcp23017:
#   - id: mcp23017_hub
#     i2c_id: i2c_main
#     address: 0x20

# ds248x:
#   i2c_id: i2c_main
#   address: 0x18 # should be the default
#   # sleep_pin: 32 # remove if not needed, if set the ds248x sleeps when no transaction is in progress
#   active_pullup: true # adds a active pullup which should improve signal integrity
#   strong_pullup: false # enables a strong pullup used to provide the needed current for temperature reading without vcc connected
#   bus_sleep: true # power down the bus when no transaction is in progres

one_wire:
  - platform: gpio
    pin: 1
    id: hub_1
  # - platform: gpio
  #   pin: 2
  #   id: hub_2

m5stack_4relay:
  id: m5stack_relay_1
  i2c_id: i2c_main

# mqtt:
#   id: mqtt_client
#   broker: !secret mqtt_ip
#   # broker: 10.10.10.10
#   username: !secret mqtt_username
#   password: !secret mqtt_password
#   discovery: true

# mdns:
#   disabled: false

# wifi:
#   use_address: 10.17.240.52

switch:
  - platform: m5stack_4relay
    name: ${name} Relay 1
    id: relay_1
    channel: 1
    # interlock: &interlock_group_1 [relay_1, relay_2]
    # interlock_wait_time: 1s
    m5stack_4relay_id: m5stack_relay_1
  - platform: m5stack_4relay
    name: ${name} Relay 2
    id: relay_2
    channel: 2
    # interlock: *interlock_group_1
    # interlock_wait_time: 1s
    m5stack_4relay_id: m5stack_relay_1
  - platform: m5stack_4relay
    name: ${name} Relay 3
    id: relay_3
    channel: 3
    # interlock: &interlock_group_2 [relay_3, relay_4]
    m5stack_4relay_id: m5stack_relay_1
  - platform: m5stack_4relay
    name: ${name} Relay 4
    id: relay_4
    channel: 4
    # interlock: *interlock_group_2
    m5stack_4relay_id: m5stack_relay_1
  - platform: gpio
    name: "PCF8574 Pin #8"
    pin:
      pcf8574: pcf8574_hub
      number: 17
      # One of INPUT or OUTPUT
      mode:
        output: true
      inverted: false
spi:
  clk_pin: 17
  mosi_pin: 21

binary_sensor:
  - platform: gpio
    name: ${name} Button
    pin:
      number: 41
      inverted: true
  - platform: status
    id: system_status
  # - platform: gpio
  #   id: test_sensor_1
  #   pin:
  #     mcp23xxx: mcp23017_hub
  #     number: 4
  #     mode:
  #       input: true
  #       pullup: true
  #     inverted: false
  #   filters:
  #     - delayed_on_off: 50ms #Debounce
  # - platform: gpio
  #   id: test_sensor_2
  #   pin:
  #     mcp23xxx: mcp23017_hub
  #     number: 5
  #     mode:
  #       input: true
  #       pullup: true
  #     inverted: false
  #   filters:
  #     - delayed_on_off: 50ms #Debounce
  # - platform: gpio
  #   id: test_sensor_3
  #   pin:
  #     mcp23xxx: mcp23017_hub
  #     number: 6
  #     mode:
  #       input: true
  #       pullup: true
  #     inverted: false
  #   filters:
  #     - delayed_on_off: 50ms #Debounce
  # - platform: gpio
  #   id: test_sensor_4
  #   pin:
  #     mcp23xxx: mcp23017_hub
  #     number: 7
  #     mode:
  #       input: true
  #       pullup: true
  #     inverted: false
  #   filters:
  #     - delayed_on_off: 50ms #Debounce

color:
  - id: my_red
    red: 100%
    green: 0%
    blue: 0%
  - id: my_yellow
    red: 100%
    green: 100%
    blue: 0%
  - id: my_green
    red: 0%
    green: 100%
    blue: 0%
  - id: my_blue
    red: 0%
    green: 0%
    blue: 100%
  - id: my_gray
    red: 50%
    green: 50%
    blue: 50%

font:
  - file: "gfonts://Roboto"
    id: font_default
    size: 20
  - file: "gfonts://Roboto"
    id: roboto_32
    size: 32
  - file: "gfonts://Roboto"
    id: roboto_24
    size: 24
  - file: "gfonts://Roboto"
    id: roboto_12
    size: 12

display:
  - platform: st7789v
    id: display_tft
    model: Custom
    height: 128
    width: 128
    offset_height: 2
    offset_width: 1
    backlight_pin: 16
    cs_pin: 15
    dc_pin: 33
    reset_pin: 34
    eightbitcolor: true
    update_interval: 1s
    lambda: |-
      //Ingress shown animation Frame.
      id(blinky).next_frame();
      // Draw the animation my_animation at position [x=0,y=0]
      it.image(0, 0, id(blinky), COLOR_ON, COLOR_OFF);
  
      // // it.print(0, 0, id(font_default), "Hello World!");
      // // it.strftime(0, 0, id(font_default), TextAlign::TOP_LEFT, "%H:%M", id(ha_time).now());
      // it.rectangle(0,  0, it.get_width(), it.get_height(), id(my_blue));
      // it.rectangle(0, 20, it.get_width(), it.get_height(), id(my_blue));   // header bar

      // it.strftime((128 / 2), (128 / 3) * 1 + 5, id(roboto_24), id(my_gray), TextAlign::CENTER, "%Y-%m-%d", id(ha_time).now());
      // it.strftime((128 / 2), (128 / 3) * 2 + 5, id(roboto_32), id(my_gray), TextAlign::CENTER, "%H:%M:%S", id(ha_time).now());
      // it.print(5, 5, id(roboto_12), id(my_yellow), TextAlign::TOP_LEFT, "ESPHome");

      // // Comment out the above lines to see the image without text overlaid
      // // it.image(0, 0, id(my_image));

      // if (id(system_status).state) {
      //   it.print(115, 5, id(roboto_12), id(my_green), TextAlign::TOP_RIGHT, "Online");
      // }
      // else {
      //   it.print(115, 5, id(roboto_12), id(my_red), TextAlign::TOP_RIGHT, "Offline");
      // }

  - platform: ssd1306_i2c
    model: "SH1107 128x64"
    # model: "SSD1306 128x64"
    id: "lcd"
    address: 0x3C
    i2c_id: i2c_main
    rotation: 90
    flip_x: false
    flip_y: false
    offset_y: 0
    offset_x: 0
    # lambda: |-
    #   it.line(0, 0, 128, 64);
    #   it.rectangle(5, 5, 10, 10);
    #   it.circle(118, 54, 5);
    #   it.rectangle(0, 0, 128, 64);

sensor:
  - platform: sht3xd
    i2c_id: i2c_main
    address: 0x44
    temperature:
      name: "TEST Temperature"
    humidity:
      name: "TEST Humidity"
    update_interval: 10s
  - platform: mpu6886
    address: 0x68
    i2c_id: i2c_main
    # accel_x:
    #   name: "${name} MPU6886 Accel X"
    # accel_y:
    #   name: "${name} MPU6886 Accel Y"
    # accel_z:
    #   name: "${name} MPU6886 Accel z"
    # gyro_x:
    #   name: "${name} MPU6886 Gyro X"
    # gyro_y:
    #   name: "${name} MPU6886 Gyro Y"
    # gyro_z:
    #   name: "${name} MPU6886 Gyro z"
    temperature:
      name: "${name} Temperature"
      id: blabla
  - platform: homeassistant
    id: test_humidity
    entity_id: sensor.humidity_158d0001c2a1d1
  # - platform: ds248x
  #   address: 0x8b0516b39804ff28
  #   name: "${name} Dallas Temp 1"
  #   resolution: 12
  # - platform: ds248x
  #   address: 0xa50516b3d32aff28
  #   name: "${name} Dallas Temp 2"
  #   resolution: 12
  # - platform: ds248x
  #   address: 0x8f0516b39d87ff28
  #   name: "${name} Dallas Temp 3"
  #   resolution: 12
  # - platform: ds248x
  #   address: 0x810516b3c69fff28
  #   name: "${name} Dallas Temp 4"
  #   resolution: 12
  - platform: dallas_temp
    address: 0xdb041750eae2ff28
    name: "${name} Dallas Temp 1"
    one_wire_id: hub_1
    update_interval: 10s
  - platform: dallas_temp
    address: 0xb2041750cf1aff28
    name: "${name} Dallas Temp 2"
    one_wire_id: hub_1
    update_interval: 30s
  - platform: dallas_temp
    address: 0xcd01191eb8b07128
    name: "${name} Dallas Temp 3"
    one_wire_id: hub_1
    update_interval: 45s
  - platform: dallas_temp
    address: 0x5a01191ef3375b28
    name: "${name} Dallas Temp 4"
    one_wire_id: hub_1

time:
  - !include common/time/homeassistant.yaml
  # - platform: sntp
  #   id: sntp_time
  #   timezone: Europe/Bratislava
  #   servers:
  #    - 0.pool.ntp.org
  #    - 1.pool.ntp.org
  #    - 2.pool.ntp.org

# esp32_ble_tracker:
#   scan_parameters:
#     active: true

# bluetooth_proxy:
#   active: true

# esp32_improv:
#   authorizer: none