substitutions:
  device: vehicle-honda-pcx125
  name: Vehicle Honda PCX125
  area: Outside
  comment: "${area}, Beacon | Honda PCX125"

esphome:
  name: mcu-${device}
  area: ${area}
  comment: ${comment}
  on_loop:
    then:
      lambda: |-
        static uint32_t last_state = 0;
        auto state = App.get_app_state();
        if (state != last_state) {
          if (state & STATUS_LED_ERROR) {
            auto call = id(led).turn_on();
            call.set_effect("ERROR");
            call.perform();
          } else if (state & STATUS_LED_WARNING) {
            auto call = id(led).turn_on();
            call.set_effect("BOOT");
            call.perform();
          } else {
            //auto call = id(led).turn_off();
            //call.perform();
            auto call = id(led).turn_on();
            call.set_effect("BEACON");
            call.perform();
          }
          last_state = state;
        }

esp32:
  board: m5stack-atom
  framework:
    type: esp-idf

# api:
#   reboot_timeout: 0s

# wifi:
#   reboot_timeout: 0s

external_components:
  - source: components

packages:
  common: !include common/logger.yaml
#   common: !include common/common.yaml
  
# debug:

# PINOUTS: M5ATOM
# IR        G12
# NEO       G27
# BUTTON    G39
# I2C0 SDA  G26
# I2C0 SCL  G32
# I2C1 SDA  G25
# I2C1 SCL  G21
# UART0 RX  G3
# UART0 TX  G1
# UART1 RX  G23
# UART1 TX  G33
# 1-WIRE    G22
# NC        G19

esp32_ble_beacon:
  type: iBeacon
  uuid: !secret ble_beacon_honda_uuid
  major: !secret ble_beacon_honda_major
  minor: !secret ble_beacon_honda_minor

light:
  - platform: esp32_rmt_led_strip
    name: "${name} LED"
    id: led
    rgb_order: GRB
    pin: 27
    num_leds: 1
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
      - strobe:
          name: "BEACON"
          colors:
            - state: true
              red: 0%
              green: 0%
              blue: 50%
              duration: 200ms
            - state: false
              duration: 200ms
            - state: true
              red: 0%
              green: 0%
              blue: 50%
              duration: 200ms
            - state: false
              duration: 10s
      - lambda:
          name: "ERROR"
          update_interval: 0.5s
          lambda: |-
            static bool state = false;
            auto call = id(led).turn_on();
            call.set_transition_length(500);
            call.set_rgb(1, 0, 0);
            if (!state) {
              call.set_brightness(1);
            } else {
              // If using 0, it freaks Home Assistant UI.
              call.set_brightness(0.01);
            }
            call.perform();
            state = !state;
      - lambda:
          name: "BOOT"
          update_interval: 0.5s
          lambda: |-
            static bool state = false;
            auto call = id(led).turn_on();
            call.set_transition_length(500);
            call.set_rgb(0, 1, 0);
            if (!state) {
              call.set_brightness(1);
            } else {
              // If using 0, it freaks Home Assistant UI.
              call.set_brightness(0.01);
            }
            call.perform();
            state = !state;