mirror of
https://github.com/randybb/esphome-configs.git
synced 2026-10-14 08:35:12 +02:00
randy
bb76912023
Values come from ESPHome's own hint in the log of each online device
("Set flash_chip: ... to save IRAM"). Devices that were off got the value of
an identical board (ESP32-PICO-D4 ATOM/Stamp Pico: gd, JC3248W535: generic,
POW Elite: gd), marked as not read from the device.
149 lines
3.8 KiB
YAML
149 lines
3.8 KiB
YAML
---
|
|
# Hardware: Xiaomi Mi Desk Lamp, brain transplant: M5Stack M5Stamp Pico (originally ESP8266)
|
|
# Pinout:
|
|
# GPIO18 Warm White (GPIO_PWM2) -> warm_white (output ledc)
|
|
# GPIO19 Cold White (GPIO_PWM1) -> cold_white (output ledc)
|
|
# GPIO21 Rotary switch A pin (GPIO_ROT_A) -> rotary (sensor rotary_encoder pin_a)
|
|
# GPIO26 Rotary switch B pin (GPIO_ROT_B) -> rotary (sensor rotary_encoder pin_b)
|
|
# GPIO36 Button (GPIO_KEY1) -> rotary_button (binary_sensor gpio) (inverted)
|
|
substitutions:
|
|
device: desk-lamp
|
|
name: Desk Lamp
|
|
area: Room
|
|
comment: Desk lamp
|
|
|
|
esphome:
|
|
name: mcu-${device}
|
|
friendly_name: ${name}
|
|
area: ${area}
|
|
comment: ${comment}
|
|
|
|
esp32:
|
|
variant: esp32
|
|
toolchain: esp-idf
|
|
framework:
|
|
advanced:
|
|
flash_chip: gd
|
|
type: esp-idf
|
|
|
|
packages:
|
|
common: !include common/common.yaml
|
|
ipv6_only: !include common/ipv6_only.yaml
|
|
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin:
|
|
number: 36
|
|
inverted: yes
|
|
id: rotary_button
|
|
# filters:
|
|
# invert:
|
|
on_click:
|
|
- light.toggle: mi_desk_light
|
|
# on_double_click:
|
|
# - switch.toggle: relay_2
|
|
|
|
light:
|
|
- platform: cwww
|
|
name: Light
|
|
id: mi_desk_light
|
|
gamma_correct: 1
|
|
default_transition_length: 100ms
|
|
restore_mode: ALWAYS_OFF
|
|
cold_white: cold_white
|
|
warm_white: warm_white
|
|
cold_white_color_temperature: 153 mireds
|
|
warm_white_color_temperature: 370 mireds
|
|
|
|
output:
|
|
- platform: ledc
|
|
pin: 18
|
|
max_power: 0.85
|
|
id: warm_white
|
|
- platform: ledc
|
|
pin: 19
|
|
max_power: 0.85
|
|
id: cold_white
|
|
|
|
sensor:
|
|
- platform: rotary_encoder
|
|
id: rotary
|
|
pin_a: 21
|
|
pin_b: 26
|
|
resolution: "2"
|
|
# min_value: 128
|
|
# max_value: 255
|
|
# on_value:
|
|
# - while:
|
|
# condition:
|
|
# binary_sensor.is_off: button
|
|
# then:
|
|
# - light.dim_relative:
|
|
# id: mi_desk_light
|
|
# relative_brightness: 5%
|
|
# transition_length: 0.1s
|
|
# - delay: 0.1s
|
|
# filters:
|
|
# - or:
|
|
# - debounce: 0.1s
|
|
# - delta: 10
|
|
# - lambda: |-
|
|
# if (x < 0.0) return 0.0;
|
|
# if (x > 255.0) return 255.0;
|
|
# return x;
|
|
# on_value:
|
|
# then:
|
|
# # - output.set_level:
|
|
# # id: warm_white
|
|
# # level: !lambda "return x/256.0;"
|
|
# - output.set_level:
|
|
# id: warm_white
|
|
# level: !lambda |-
|
|
# return x / 255;
|
|
on_value:
|
|
then:
|
|
- lambda: |-
|
|
float brightness;
|
|
float temp = id(mi_desk_light).remote_values.get_color_temperature();
|
|
auto call = id(mi_desk_light).turn_on();
|
|
id(mi_desk_light).remote_values.as_brightness( &brightness );
|
|
|
|
// positive rotation
|
|
if (id(rotary).state > 0) {
|
|
//
|
|
if (id(rotary_button).state) {
|
|
temp -= 5.0f;
|
|
} else {
|
|
brightness -= 0.05f;
|
|
}
|
|
id(rotary).set_value(0);
|
|
// negative rotation
|
|
} else if (id(rotary).state < 0) {
|
|
if (id(rotary_button).state) {
|
|
temp += 5.0f;
|
|
} else {
|
|
brightness += 0.05f;
|
|
}
|
|
id(rotary).set_value(0);
|
|
}
|
|
|
|
// out of bounds check for brightness
|
|
if (brightness < 0.1f) {
|
|
brightness = 0.1f;
|
|
} else if (brightness > 1.0f) {
|
|
brightness = 1.0f;
|
|
}
|
|
|
|
// out of bounds check for color temp
|
|
if (temp < 153.0f) {
|
|
temp = 153.0f;
|
|
} else if (temp > 370.0f) {
|
|
temp = 370.0f;
|
|
}
|
|
|
|
// apply new settings
|
|
call.set_brightness(brightness);
|
|
call.set_color_temperature(temp);
|
|
call.perform();
|