mirror of
https://github.com/randybb/esphome-configs.git
synced 2026-10-14 08:35:12 +02:00
87 lines
1.8 KiB
YAML
87 lines
1.8 KiB
YAML
---
|
|
# Hardware: Sonoff Mini
|
|
# Pinout:
|
|
# GPIO12 -> relay (output gpio)
|
|
# GPIO13 -> led_blue (output gpio)
|
|
substitutions:
|
|
device: staircase-light
|
|
name: Staircase
|
|
area: Staircase
|
|
comment: Light
|
|
|
|
esphome:
|
|
name: mcu-${device}
|
|
friendly_name: ${name}
|
|
area: ${area}
|
|
comment: ${comment}
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
packages:
|
|
common: !include common/common_esp8266.yaml
|
|
mdns_ipv6: !include common/esp8266_mdns_ipv6.yaml
|
|
|
|
# wifi:
|
|
# use_address: mcu-mini-04.local
|
|
|
|
binary_sensor:
|
|
# - platform: gpio
|
|
# pin:
|
|
# number: GPIO4
|
|
# mode: INPUT_PULLUP
|
|
# inverted: yes
|
|
# name: "${name} PIR"
|
|
# device_class: motion
|
|
# filters:
|
|
# invert:
|
|
# on_press:
|
|
# # min_length: 50ms
|
|
# # max_length: 350ms
|
|
# then:
|
|
# - switch.toggle: relay
|
|
# on_double_click:
|
|
# # min_length: 50ms
|
|
# # max_length: 350ms
|
|
# then:
|
|
# - switch.turn_on: relay
|
|
# - light.turn_on: light_blue
|
|
# - delay: 2h
|
|
# - switch.turn_off: relay
|
|
# - light.turn_off: light_blue
|
|
- platform: homeassistant
|
|
id: motion
|
|
entity_id: binary_sensor.zigbee_staircase_pir_occupancy
|
|
on_state:
|
|
if:
|
|
condition: &no_motion
|
|
and:
|
|
- binary_sensor.is_off: motion
|
|
- binary_sensor.is_off: motion_2
|
|
then:
|
|
- light.turn_off: light_relay
|
|
- platform: homeassistant
|
|
id: motion_2
|
|
entity_id: binary_sensor.zigbee_staircase_2_pir_occupancy
|
|
on_state:
|
|
if:
|
|
condition: *no_motion
|
|
then:
|
|
- light.turn_off: light_relay
|
|
|
|
output:
|
|
- platform: gpio
|
|
pin: GPIO13
|
|
id: led_blue
|
|
inverted: True
|
|
- platform: gpio
|
|
pin: GPIO12
|
|
id: relay
|
|
|
|
light:
|
|
- platform: binary
|
|
name: Light
|
|
id: light_relay
|
|
output: relay
|
|
restore_mode: ALWAYS_ON
|