mirror of
https://github.com/randybb/esphome-configs.git
synced 2026-10-14 08:35:12 +02:00
120 lines
2.8 KiB
YAML
120 lines
2.8 KiB
YAML
---
|
|
# Hardware: IKEA VINDRIKTNING (modded) + M5Stack M5Stamp Pico
|
|
# Pinout:
|
|
# GPIO21 PM1006 UART -> particle_uart (uart tx_pin)
|
|
# GPIO22 PM1006 UART -> particle_uart (uart rx_pin)
|
|
# GPIO25 TZT 8-bit WS2812 5050 stick (8 LEDs, 7 visible outside) -> NEO [neo] (light esp32_rmt_led_strip), also status
|
|
# GPIO27 Onboard RGB LED (1x WS2812, inside), unused
|
|
# GPIO32 Grove SDA -> i2c (i2c sda)
|
|
# GPIO33 Grove SCL -> i2c (i2c scl)
|
|
substitutions:
|
|
device: air-office-r
|
|
name: Office R Air
|
|
name_short: Office R
|
|
area: Office R
|
|
comment: AirQ Monitoring
|
|
|
|
esphome:
|
|
name: mcu-${device}
|
|
friendly_name: ${name}
|
|
area: ${area}
|
|
comment: ${comment}
|
|
|
|
esp32:
|
|
variant: esp32
|
|
toolchain: esp-idf
|
|
framework:
|
|
type: esp-idf
|
|
|
|
packages:
|
|
common: !include common/common.yaml
|
|
status_led: !include
|
|
file: common/status_led.yaml
|
|
vars:
|
|
light_id: neo
|
|
|
|
i2c:
|
|
# - id: i2c0
|
|
sda: 32
|
|
scl: 33
|
|
scan: true #false
|
|
frequency: 100kHz
|
|
# - id: i2c1
|
|
# sda: 25
|
|
# scl: 22
|
|
# scan: true #false
|
|
|
|
uart:
|
|
id: particle_uart
|
|
tx_pin: 21
|
|
rx_pin: 22
|
|
baud_rate: 9600
|
|
|
|
# binary_sensor:
|
|
# - platform: gpio
|
|
# # name: ${name} Button
|
|
# pin:
|
|
# number: 39
|
|
# inverted: true
|
|
|
|
light:
|
|
# also the status light (common/status_led.yaml): back to its previous state when all is fine
|
|
- platform: esp32_rmt_led_strip
|
|
name: NEO
|
|
id: neo
|
|
channel_colors: GRB
|
|
pin: 25
|
|
num_leds: 7 # 8 on the stick, the 8th one is hidden
|
|
chipset: ws2812
|
|
restore_mode: ALWAYS_OFF
|
|
effects:
|
|
- random:
|
|
- random:
|
|
name: "My Slow Random Effect"
|
|
transition_length: 30s
|
|
update_interval: 30s
|
|
- random:
|
|
name: "My Fast Random Effect"
|
|
transition_length: 4s
|
|
update_interval: 5s
|
|
- strobe:
|
|
- strobe:
|
|
name: Strobe Effect With Custom Values
|
|
colors:
|
|
- state: True
|
|
brightness: 100%
|
|
red: 100%
|
|
green: 90%
|
|
blue: 0%
|
|
duration: 500ms
|
|
- state: False
|
|
duration: 250ms
|
|
- state: True
|
|
brightness: 100%
|
|
red: 0%
|
|
green: 100%
|
|
blue: 0%
|
|
duration: 500ms
|
|
- flicker:
|
|
- flicker:
|
|
name: Flicker Effect With Custom Values
|
|
alpha: 95%
|
|
intensity: 1.5%
|
|
- addressable_rainbow:
|
|
- addressable_rainbow:
|
|
name: Rainbow Effect With Custom Values
|
|
speed: 10
|
|
width: 50
|
|
- addressable_scan:
|
|
- addressable_scan:
|
|
name: Scan Effect With Custom Values
|
|
move_interval: 100ms
|
|
|
|
sensor:
|
|
# https://blissair.com/what-is-pm-2-5.htm
|
|
- platform: pm1006
|
|
uart_id: particle_uart
|
|
update_interval: 20s
|
|
pm_2_5:
|
|
name: Particulate Matter 2.5µm Concentration
|