Remove old style platform and change dallas to one_wire

mcu-basement-2.yaml

@@ -7,9 +7,9 @@ substitutions:
 esphome:
   name: mcu-${device}
   comment: ${comment}
-  platform: ESP8266
-  board: esp01_1m
 
+esp8266:
+  board: esp01_1m
 
 packages:
   common: !include common/common_esp8266.yaml

mcu-basement.yaml

@@ -6,7 +6,8 @@ substitutions:
 esphome:
   name: mcu-${device}
   comment: ${comment}
-  platform: ESP8266
+
+esp8266:
   board: esp01_1m
 
 packages:

mcu-dev-temp.yaml

@@ -9,9 +9,9 @@ esphome:
 
 esp32:
   board: esp32doit-devkit-v1
-  # framework:
+  framework:
   #   type: arduino
-  #   # type: esp-idf
+    type: esp-idf
 
 external_components:
   - source: components
@@ -25,12 +25,12 @@ switch:
     id: sensor_power
     restore_mode: ALWAYS_ON
 
-dallas:
-  - pin: GPIO25
-    update_interval: 10s
+one_wire:
+  - platform: gpio
+    pin: GPIO25
 
 sensor:
-  - platform: dallas
-    index: 0
+  - platform: dallas_temp
     name: $name Dallas
-    id: temp
+    id: temp
+    update_interval: 10 s

mcu-irrigation-1.yaml

@@ -6,8 +6,6 @@ substitutions:
 esphome:
   name: mcu-${device}
   comment: ${comment}
-  platform: ESP8266
-  board: esp01_1m
   # on_boot:
   #   priority: -10
   #   then:
@@ -21,6 +19,9 @@ esphome:
   #     - delay: 2s
   #     - switch.turn_off: relay_5
 
+esp8266:
+  board: esp01_1m
+
 packages:
   common: !include common/common_esp8266.yaml