mcu-stackchan: spectrum analyzer, head touch gestures, status bar

- Winamp style spectrum analyzer instead of the face while music plays,
  using audio_spectrum from randybb/esphome-components
- head touch: tap starts the assistant, stroking shows an in-love face;
  SI12T sensitivity raised so the pads actually trigger
- battery (AXP2101) and wifi indicators, ear icon while listening

.github/workflows/ci.yml

@@ -0,0 +1,53 @@
+name: CI
+
+on:
+  push:
+    branches: [main]
+  pull_request:
+
+jobs:
+  yamllint:
+    name: YAML lint
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get changed YAML files
+        id: changed
+        uses: tj-actions/changed-files@v46
+        with:
+          files: "**/*.yaml"
+
+      - uses: ibiqlik/action-yamllint@v3
+        if: steps.changed.outputs.any_changed == 'true'
+        with:
+          config_file: .yamllint.yml
+          file_or_dir: ${{ steps.changed.outputs.all_changed_files }}
+
+  validate:
+    name: ESPHome config validation
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get changed device configs
+        id: changed
+        uses: tj-actions/changed-files@v46
+        with:
+          files: "mcu-*.yaml"
+
+      - name: Install ESPHome (dev)
+        if: steps.changed.outputs.any_changed == 'true'
+        run: pip install git+https://github.com/esphome/esphome.git@dev
+
+      - name: Prepare secrets
+        if: steps.changed.outputs.any_changed == 'true'
+        run: cp secrets.yaml.default secrets.yaml
+
+      - name: Validate changed configs
+        if: steps.changed.outputs.any_changed == 'true'
+        run: |
+          for f in ${{ steps.changed.outputs.all_changed_files }}; do
+            echo "Validating $f..."
+            esphome config "$f"
+          done

.gitignore

@@ -1,6 +1,9 @@
 # Gitignore settings for ESPHome
 # This is an example and may include too much for your use-case.
 # You can modify this file to suit your needs.
+/.claude/
 /.esphome/
 /secrets.yaml
+/archive/
 /trash/
+.device-builder.json

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+  "files.associations": {
+    "*.yaml": "esphome"
+  }
+}

.yamllint.yml

@@ -0,0 +1,27 @@
+extends: default
+
+rules:
+  # ESPHome uses True/False (Python style) and yes/no
+  truthy:
+    allowed-values: ["true", "false", "True", "False", "yes", "no", "on", "off", "ON", "OFF"]
+    check-keys: false
+
+  # Lambdas and long substitutions can exceed 80 chars
+  line-length:
+    max: 200
+    level: warning
+
+  # Not all files use --- document start marker
+  document-start: disable
+
+  # ESPHome uses both indented and non-indented sequences
+  indentation:
+    spaces: 2
+    indent-sequences: whatever
+    check-multi-line-strings: false
+
+  # Some files have trailing spaces; warn only
+  trailing-spaces: enable
+
+  comments:
+    require-starting-space: false

CLAUDE.md

@@ -0,0 +1,8 @@
+# Git commit attribution
+
+Do not add any Claude/Anthropic attribution to git commits or pull requests in
+this repository — no `Co-Authored-By: Claude ...` line, no mention of Claude
+anywhere in the commit message or PR description. Commits should look like
+they were written entirely by the human author.
+
+This overrides any default Claude Code attribution instructions.

arduino_port_expander.h

@@ -1,311 +0,0 @@
-// Must disable logging if using logging in main.cpp or in other custom components for the
-//  __c causes a section type conflict with __c thingy
-// you can enable logging and use it if you enable this in logger:
-/*
-logger:
-  level: DEBUG
-  esp8266_store_log_strings_in_flash: False
-  */
-
-//#define APE_LOGGING
-
-// take advantage of LOG_ defines to decide which code to include
-#ifdef LOG_BINARY_OUTPUT
-#define APE_BINARY_OUTPUT
-#endif
-#ifdef LOG_BINARY_SENSOR
-#define APE_BINARY_SENSOR
-#endif
-#ifdef LOG_SENSOR
-#define APE_SENSOR
-#endif
-
-static const char *TAGape = "ape";
-
-#define APE_CMD_DIGITAL_READ 0
-#define APE_CMD_WRITE_ANALOG 2
-#define APE_CMD_WRITE_DIGITAL_HIGH 3
-#define APE_CMD_WRITE_DIGITAL_LOW 4
-#define APE_CMD_SETUP_PIN_OUTPUT 5
-#define APE_CMD_SETUP_PIN_INPUT_PULLUP 6
-#define APE_CMD_SETUP_PIN_INPUT 7
-// 8 analog registers.. A0 to A7
-// A4 and A5 not supported due to I2C
-#define CMD_ANALOG_READ_A0 0b1000 // 0x8
-// ....
-#define CMD_ANALOG_READ_A7 0b1111 // 0xF
-
-#define CMD_SETUP_ANALOG_INTERNAL 0x10
-#define CMD_SETUP_ANALOG_DEFAULT 0x11
-
-#define get_ape(constructor) static_cast<ArduinoPortExpander *>(constructor.get_component(0))
-
-#define ape_binary_output(ape, pin) get_ape(ape)->get_binary_output(pin)
-#define ape_binary_sensor(ape, pin) get_ape(ape)->get_binary_sensor(pin)
-#define ape_analog_input(ape, pin) get_ape(ape)->get_analog_input(pin)
-
-class ArduinoPortExpander;
-
-using namespace esphome;
-
-#ifdef APE_BINARY_OUTPUT
-class ApeBinaryOutput : public output::BinaryOutput
-{
-public:
-  ApeBinaryOutput(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->parent_ = parent;
-    this->pin_ = pin;
-  }
-  void write_state(bool state) override;
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  ArduinoPortExpander *parent_;
-  uint8_t pin_;
-  // Pins are setup as output after the state is written, Arduino has no open drain outputs, after setting an output it will either sink or source thus activating outputs writen to false during a flick.
-  bool setup_{true};
-  bool state_{false};
-
-  friend class ArduinoPortExpander;
-};
-#endif
-
-#ifdef APE_BINARY_SENSOR
-class ApeBinarySensor : public binary_sensor::BinarySensor
-{
-public:
-  ApeBinarySensor(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->pin_ = pin;
-  }
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  uint8_t pin_;
-};
-#endif
-
-#ifdef APE_SENSOR
-class ApeAnalogInput : public sensor::Sensor
-{
-public:
-  ApeAnalogInput(ArduinoPortExpander *parent, uint8_t pin)
-  {
-    this->pin_ = pin;
-  }
-  uint8_t get_pin() { return this->pin_; }
-
-protected:
-  uint8_t pin_;
-};
-#endif
-
-class ArduinoPortExpander : public Component, public I2CDevice
-{
-public:
-  ArduinoPortExpander(I2CBus *bus, uint8_t address, bool vref_default = false)
-  {
-    set_i2c_address(address);
-    set_i2c_bus(bus);
-    this->vref_default_ = vref_default;
-  }
-  void setup() override
-  {
-#ifdef APE_LOGGING
-    ESP_LOGCONFIG(TAGape, "Setting up ArduinoPortExpander at %#02x ...", address_);
-#endif
-
-    /* We cannot setup as usual as arduino boots later than esp8266
-
-            Poll i2c bus for our Arduino for a n seconds instead of failing fast,
-            also this is important as pin setup (INPUT_PULLUP, OUTPUT it's done once)
-        */
-    this->configure_timeout_ = millis() + 5000;
-  }
-  void loop() override
-  {
-    if (millis() < this->configure_timeout_)
-    {
-      bool try_configure = millis() % 100 > 50;
-      if (try_configure == this->configure_)
-        return;
-      this->configure_ = try_configure;
-
-      if (ERROR_OK == this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 3))
-      {
-#ifdef APE_LOGGING
-        ESP_LOGCONFIG(TAGape, "ArduinoPortExpander found at %#02x", address_);
-#endif
-        delay(10);
-        if (this->vref_default_)
-        {
-          this->write_register(CMD_SETUP_ANALOG_DEFAULT, nullptr, 0); // 0: unused
-        }
-
-        // Config success
-        this->configure_timeout_ = 0;
-        this->status_clear_error();
-#ifdef APE_BINARY_SENSOR
-        for (ApeBinarySensor *pin : this->input_pins_)
-        {
-          App.feed_wdt();
-          uint8_t pinNo = pin->get_pin();
-#ifdef APE_LOGGING
-          ESP_LOGCONFIG(TAGape, "Setup input pin %d", pinNo);
-#endif
-          this->write_register(APE_CMD_SETUP_PIN_INPUT_PULLUP, &pinNo, 1);
-          delay(20);
-        }
-#endif
-#ifdef APE_BINARY_OUTPUT
-        for (ApeBinaryOutput *output : this->output_pins_)
-        {
-          if (!output->setup_)
-          { // this output has a valid value already
-            this->write_state(output->pin_, output->state_, true);
-            App.feed_wdt();
-            delay(20);
-          }
-        }
-#endif
-#ifdef APE_SENSOR
-        for (ApeAnalogInput *sensor : this->analog_pins_)
-        {
-          App.feed_wdt();
-          uint8_t pinNo = sensor->get_pin();
-#ifdef APE_LOGGING
-          ESP_LOGCONFIG(TAGape, "Setup analog input pin %d", pinNo);
-#endif
-          this->write_register(APE_CMD_SETUP_PIN_INPUT, &pinNo, 1);
-          delay(20);
-        }
-#endif
-        return;
-      }
-      // Still not answering
-      return;
-    }
-    if (this->configure_timeout_ != 0 && millis() > this->configure_timeout_)
-    {
-#ifdef APE_LOGGING
-      ESP_LOGE(TAGape, "ArduinoPortExpander NOT found at %#02x", address_);
-#endif
-      this->mark_failed();
-      return;
-    }
-
-#ifdef APE_BINARY_SENSOR
-    if (ERROR_OK != this->read_register(APE_CMD_DIGITAL_READ, const_cast<uint8_t *>(this->read_buffer_), 3))
-    {
-#ifdef APE_LOGGING
-      ESP_LOGE(TAGape, "Error reading. Reconfiguring pending.");
-#endif
-      this->status_set_error();
-      this->configure_timeout_ = millis() + 5000;
-      return;
-    }
-    for (ApeBinarySensor *pin : this->input_pins_)
-    {
-      uint8_t pinNo = pin->get_pin();
-
-      uint8_t bit = pinNo % 8;
-      uint8_t value = pinNo < 8 ? this->read_buffer_[0] : pinNo < 16 ? this->read_buffer_[1] : this->read_buffer_[2];
-      bool ret = value & (1 << bit);
-      if (this->initial_state_)
-        pin->publish_initial_state(ret);
-      else
-        pin->publish_state(ret);
-    }
-#endif
-#ifdef APE_SENSOR
-    for (ApeAnalogInput *pin : this->analog_pins_)
-    {
-      uint8_t pinNo = pin->get_pin();
-      pin->publish_state(analogRead(pinNo));
-    }
-#endif
-    this->initial_state_ = false;
-  }
-
-#ifdef APE_SENSOR
-  uint16_t analogRead(uint8_t pin)
-  {
-    bool ok = (ERROR_OK == this->read_register((uint8_t)(CMD_ANALOG_READ_A0 + pin), const_cast<uint8_t *>(this->read_buffer_), 2));
-#ifdef APE_LOGGING
-    ESP_LOGVV(TAGape, "analog read pin: %d ok: %d byte0: %d byte1: %d", pin, ok, this->read_buffer_[0], this->read_buffer_[1]);
-#endif
-    uint16_t value = this->read_buffer_[0] | ((uint16_t)this->read_buffer_[1] << 8);
-    return value;
-  }
-#endif
-
-#ifdef APE_BINARY_OUTPUT
-  output::BinaryOutput *get_binary_output(uint8_t pin)
-  {
-    ApeBinaryOutput *output = new ApeBinaryOutput(this, pin);
-    output_pins_.push_back(output);
-    return output;
-  }
-#endif
-#ifdef APE_BINARY_SENSOR
-  binary_sensor::BinarySensor *get_binary_sensor(uint8_t pin)
-  {
-    ApeBinarySensor *binarySensor = new ApeBinarySensor(this, pin);
-    input_pins_.push_back(binarySensor);
-    return binarySensor;
-  }
-#endif
-#ifdef APE_SENSOR
-  sensor::Sensor *get_analog_input(uint8_t pin)
-  {
-    ApeAnalogInput *input = new ApeAnalogInput(this, pin);
-    analog_pins_.push_back(input);
-    return input;
-  }
-#endif
-  void write_state(uint8_t pin, bool state, bool setup = false)
-  {
-    if (this->configure_timeout_ != 0)
-      return;
-#ifdef APE_LOGGING
-    ESP_LOGD(TAGape, "Writing %d to pin %d", state, pin);
-#endif
-    this->write_register(state ? APE_CMD_WRITE_DIGITAL_HIGH : APE_CMD_WRITE_DIGITAL_LOW, &pin, 1);
-    if (setup)
-    {
-      App.feed_wdt();
-      delay(20);
-#ifdef APE_LOGGING
-      ESP_LOGI(TAGape, "Setup output pin %d", pin);
-#endif
-      this->write_register(APE_CMD_SETUP_PIN_OUTPUT, &pin, 1);
-    }
-  }
-
-protected:
-  bool configure_{true};
-  bool initial_state_{true};
-  uint8_t read_buffer_[3]{0, 0, 0};
-  unsigned long configure_timeout_{5000};
-  bool vref_default_{false};
-
-#ifdef APE_BINARY_OUTPUT
-  std::vector<ApeBinaryOutput *> output_pins_;
-#endif
-#ifdef APE_BINARY_SENSOR
-  std::vector<ApeBinarySensor *> input_pins_;
-#endif
-#ifdef APE_SENSOR
-  std::vector<ApeAnalogInput *> analog_pins_;
-#endif
-};
-
-#ifdef APE_BINARY_OUTPUT
-void ApeBinaryOutput::write_state(bool state)
-{
-  this->state_ = state;
-  this->parent_->write_state(this->pin_, state, this->setup_);
-  this->setup_ = false;
-}
-#endif

assets/images/esphome-logo-text-on-dark.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="1194" height="240" fill="none" viewBox="0 0 1194 240"><g clip-path="url(#clip0_2_63)"><path fill="#18BCF2" d="M240 219C240 227.24 233.24 234 225 234H15C6.76 234 0 227.24 0 219V129C0 120.76 4.78 109.22 10.6 103.4L109.4 4.61999C115.24 -1.22001 124.78 -1.22001 130.62 4.61999L229.4 103.4C235.24 109.24 240 120.76 240 129V219Z"/><path fill="#F2F4F9" d="M160 78.66H80C76.68 78.66 74 81.34 74 84.66V234H86V90.66H154V102.66H104C100.68 102.66 98 105.34 98 108.66V132.66C98 135.98 100.68 138.66 104 138.66H154V150.66H104C100.68 150.66 98 153.34 98 156.66V180.66C98 183.98 100.68 186.66 104 186.66H154V198.66H104C100.68 198.66 98 201.34 98 204.66C98 207.98 100.68 210.66 104 210.66H160C163.32 210.66 166 207.98 166 204.66V180.66C166 177.34 163.32 174.66 160 174.66H110V162.66H160C163.32 162.66 166 159.98 166 156.66V132.66C166 129.34 163.32 126.66 160 126.66H110V114.66H160C163.32 114.66 166 111.98 166 108.66V84.66C166 81.34 163.32 78.66 160 78.66Z"/><path fill="#F2F4F9" d="M423 167.61V190.11H336V49.95H423V72.63H359.82V108.91H416.26V130.01H359.82V167.61H423Z"/><path fill="#F2F4F9" d="M491.08 47.41C503.9 47.41 514.54 50.53 523.04 56.79C531.54 63.03 536.76 71.39 538.7 81.83L516.3 87.93C515.04 81.93 512.12 77.31 507.54 74.05C502.94 70.81 497.28 69.17 490.52 69.17C483.26 69.17 477.52 70.91 473.28 74.37C469.02 77.83 466.9 82.45 466.9 88.19C466.9 97.25 472.52 103.13 483.78 105.81L506.66 111.53C518.48 114.59 527.32 119.45 533.2 126.11C539.08 132.77 542.02 140.97 542.02 150.71C542.02 163.21 537.48 173.31 528.42 181.03C519.36 188.75 507.24 192.61 492.04 192.61C478.36 192.61 466.78 189.39 457.36 182.95C448.04 176.27 442.54 167.45 440.86 156.51L463.26 150.69C464.08 156.87 467.16 161.73 472.5 165.23C477.84 168.73 484.64 170.47 492.9 170.47C501.16 170.47 507.08 168.79 511.6 165.45C516.14 162.11 518.4 157.57 518.4 151.81C518.4 142.81 512.78 136.87 501.52 133.99L478.64 128.45C466.88 125.77 458.06 120.99 452.16 114.15C446.26 107.31 443.3 98.95 443.3 89.07C443.3 76.69 447.7 66.65 456.48 58.93C465.26 51.21 476.8 47.35 491.12 47.35L491.08 47.41Z"/><path fill="#F2F4F9" d="M666.1 95.61C666.1 109.37 661.92 120.49 653.58 128.99C645.24 137.49 634 141.75 619.88 141.75H588.38V190.13H564.56V49.95H620.06C634.3 49.95 645.54 54.07 653.76 62.27C661.98 70.49 666.08 81.59 666.08 95.59L666.1 95.61ZM641.16 95.05C641.16 87.99 638.96 82.25 634.56 77.85C630.16 73.45 623.92 71.25 615.86 71.25H588.4V120.85H615.5C623.74 120.85 630.1 118.51 634.54 113.81C638.98 109.13 641.2 102.87 641.2 95.05H641.16Z"/><path fill="#F2F4F9" d="M687.38 49.95H711.2V108.55L772.98 108.73V49.95H796.98V190.11H772.98V129.83L711.2 129.65V190.11H687.38V49.95Z"/><path fill="#F2F4F9" d="M868.6 92.79C883.1 92.79 894.92 97.45 904.04 106.75C913.16 116.07 917.72 128.03 917.72 142.65C917.72 157.27 913.16 169.15 904.04 178.47C894.92 187.79 883.1 192.43 868.6 192.43C854.1 192.43 842.1 187.77 832.98 178.47C823.86 169.15 819.3 157.23 819.3 142.65C819.3 128.07 823.86 115.97 832.98 106.69C842.1 97.41 853.98 92.77 868.6 92.77V92.79ZM868.6 172.01C876.34 172.01 882.64 169.27 887.5 163.81C892.34 158.35 894.76 151.23 894.76 142.49C894.76 133.75 892.34 126.67 887.5 121.25C882.66 115.85 876.36 113.15 868.6 113.15C860.84 113.15 854.26 115.85 849.38 121.25C844.5 126.65 842.06 133.73 842.06 142.49C842.06 151.25 844.5 158.35 849.38 163.81C854.26 169.27 860.66 172.01 868.6 172.01Z"/><path fill="#F2F4F9" d="M1081.6 129.83V190.11H1059.56V133.29C1059.56 126.73 1057.88 121.61 1054.5 117.91C1051.12 114.23 1046.54 112.37 1040.72 112.37C1034.54 112.37 1029.6 114.39 1025.9 118.41C1022.22 122.45 1020.36 128.09 1020.36 135.33V190.09H998.04V133.27C998.04 126.71 996.4 121.59 993.12 117.89C989.84 114.21 985.3 112.35 979.48 112.35C973.3 112.35 968.32 114.37 964.58 118.39C960.84 122.41 958.96 128.07 958.96 135.31V190.07H936.28V95.39H957.38L958.14 104.49C963.64 96.43 972.6 92.39 985.04 92.39C992.28 92.39 998.58 93.89 1003.88 96.89C1009.2 99.89 1013.22 104.27 1015.98 110.01C1018.3 104.51 1022.12 100.19 1027.46 97.07C1032.8 93.95 1039.16 92.39 1046.54 92.39C1057.28 92.39 1065.82 95.71 1072.14 102.33C1078.46 108.95 1081.6 118.11 1081.6 129.79V129.83Z"/><path fill="#F2F4F9" d="M1193.54 151.11H1120.98C1121.74 158.23 1124.42 163.67 1129.04 167.43C1133.66 171.19 1139.54 173.05 1146.66 173.05C1158.22 173.05 1166.32 168.23 1170.94 158.61L1189.88 166.11C1186.32 174.43 1180.7 180.93 1173.06 185.61C1165.4 190.29 1156.6 192.65 1146.66 192.65C1132.66 192.65 1121.3 188.07 1112.58 178.91C1103.86 169.75 1099.5 157.73 1099.5 142.87C1099.5 128.01 1103.9 115.91 1112.68 106.59C1121.46 97.27 1132.94 92.63 1147.14 92.63C1161.34 92.63 1172.3 97.23 1180.8 106.41C1189.3 115.59 1193.56 127.69 1193.56 142.69V151.13L1193.54 151.11ZM1121.36 135.17H1170.48C1170.04 127.49 1167.72 121.63 1163.5 117.59C1159.28 113.55 1153.6 111.55 1146.48 111.55C1139.36 111.55 1133.66 113.59 1129.24 117.69C1124.8 121.79 1122.18 127.61 1121.36 135.17Z"/></g><defs><clipPath id="clip0_2_63"><rect width="1193.56" height="240" fill="#fff"/></cliLine truncated

common/binary_sensor/status.yaml

@@ -1,3 +1,4 @@
 ---
 platform: status
-name: "${name} Status"
+name: Status
+id: status_sensor

common/button/factory_reset.yaml

@@ -1,3 +1,4 @@
 ---
 platform: factory_reset
-name: ${name} Factory Defaults
+name: Factory Defaults
+id: factory_reset_button

common/button/restart.yaml

@@ -1,3 +1,4 @@
 ---
 platform: restart
-name: ${name} Restart
+name: Restart
+id: restart_button

common/button/safe_mode.yaml

@@ -1,3 +1,4 @@
 ---
 platform: safe_mode
-name: ${name} Restart (Safe Mode)
+name: Restart (Safe Mode)
+id: restart_safe_mode_button

common/button/shutdown.yaml

@@ -1,3 +1,4 @@
 ---
 platform: shutdown
-name: ${name} Shutdown
+name: Shutdown
+id: shutdown_button

common/common.yaml

@@ -1,7 +1,7 @@
 ---
 <<: !include wifi.yaml
 <<: !include api.yaml
-<<: !include ota.yaml
+<<: !include ota_esp32.yaml
 # <<: !include logger.yaml
 <<: !include logger_debug.yaml
 
@@ -24,5 +24,8 @@ text_sensor:
   # - <<: !include text_sensor/uptime.yaml
   - <<: !include text_sensor/wifi_info.yaml
 
+# time:
+#.  - <<: !include time/homeassistant.yaml
+
 network:
   enable_ipv6: true

common/common_dev.yaml

@@ -19,11 +19,6 @@ sensor:
   - <<: !include sensor/uptime.yaml
   - <<: !include sensor/wifi_signal.yaml
 
-#switch:
-#  - <<: !include switch/restart.yaml
-#  - <<: !include switch/safe_mode.yaml
-#  - <<: !include switch/shutdown.yaml
-
 text_sensor:
   - <<: !include text_sensor/debug.yaml
   - <<: !include text_sensor/version.yaml

common/common_eth.yaml

@@ -1,6 +1,6 @@
 ---
 <<: !include api.yaml
-<<: !include ota.yaml
+<<: !include ota_esp32.yaml
 <<: !include logger_debug.yaml
 <<: !include ethernet.yaml
 
@@ -16,14 +16,9 @@ sensor:
   - <<: !include sensor/uptime.yaml
   # - <<: !include sensor/free_heap.yaml
 
-#switch:
-#  - <<: !include switch/restart.yaml
-#  - <<: !include switch/safe_mode.yaml
-#  - <<: !include switch/shutdown.yaml
-
 text_sensor:
 #  - <<: !include text_sensor/debug.yaml
-  # - <<: !include text_sensor/version.yaml
+  - <<: !include text_sensor/version.yaml
   - <<: !include text_sensor/ethernet_info.yaml
 
 network:

common/common_wo_debug.yaml

@@ -22,11 +22,6 @@ sensor:
   - <<: !include sensor/uptime.yaml
   - <<: !include sensor/wifi_signal.yaml
 
-#switch:
-#  - <<: !include switch/restart.yaml
-#  - <<: !include switch/safe_mode.yaml
-#  - <<: !include switch/shutdown.yaml
-
 text_sensor:
   # - <<: !include text_sensor/debug.yaml
   - <<: !include text_sensor/git_ref.yaml

common/ethernet.yaml

@@ -3,6 +3,8 @@ ethernet:
   type: LAN8720
   mdc_pin: 23
   mdio_pin: 18
-  clk_mode: GPIO17_OUT
+  clk:
+    pin: 17
+    mode: CLK_OUT
   phy_addr: 0
   power_pin: 12

common/gate_beacon_close.yaml

@@ -0,0 +1,9 @@
+- if:
+    condition:
+      and:
+        - switch.is_on: ${enable_id}
+        - switch.is_on: auto_close
+        - lambda: 'return id(beacon_count) == 1;'
+    then:
+      - button.press: gate_close
+- lambda: 'id(beacon_count) -= 1;'

common/gate_beacon_open.yaml

@@ -0,0 +1,9 @@
+- lambda: 'id(beacon_count) += 1;'
+- if:
+    condition:
+      and:
+        - switch.is_on: ${enable_id}
+        - switch.is_on: auto_open
+        - lambda: 'return id(beacon_count) == 1;'
+    then:
+      - button.press: gate_open

common/ota_esp32.yaml

@@ -0,0 +1,5 @@
+---
+ota:
+  - platform: esphome
+    password: !secret ota_password
+    allow_partition_access: true

common/sensor/debug.yaml

@@ -1,10 +1,14 @@
 ---
 platform: debug
 free:
-  name: "${name} Heap Free"
+  name: Heap Free
+  id: heap_free_sensor
 fragmentation:
-  name: "${name} Heap Fragmentation"
+  name: Heap Fragmentation
+  id: heap_fragmentation_sensor
 block:
-  name: "${name} Heap Max Block"
+  name: Heap Max Block
+  id: heap_max_block_sensor
 loop_time:
-  name: "${name} Loop Time"
+  name: Loop Time
+  id: loop_time_sensor

common/sensor/free_heap.yaml

@@ -1,6 +1,6 @@
 ---
 platform: template
-name: ${name} Free heap
+name: Free heap
 lambda: return heap_caps_get_free_size(MALLOC_CAP_INTERNAL);
 icon: "mdi:memory"
 entity_category: diagnostic

common/sensor/uptime.yaml

@@ -1,6 +1,7 @@
 ---
 platform: uptime
-name: ${name} Uptime
+name: Uptime
+id: uptime_sensor
 unit_of_measurement: "days"
 accuracy_decimals: 2
 update_interval: 60s

common/sensor/wifi_signal.yaml

@@ -1,4 +1,5 @@
 ---
 platform: wifi_signal
-name: "${name} WiFi Signal"
+name: WiFi Signal
+id: wifi_signal_sensor
 update_interval: 60s

common/switch/restart.yaml

@@ -1,3 +1,4 @@
 ---
 platform: restart
-name: ${name} Restart
+name: Restart
+id: restart_switch

common/switch/safe_mode.yaml

@@ -1,3 +1,4 @@
 ---
 platform: safe_mode
-name: ${name} Restart (Safe Mode)
+name: Restart (Safe Mode)
+id: restart_safe_mode_switch

common/switch/shutdown.yaml

@@ -1,3 +1,4 @@
 ---
 platform: shutdown
-name: ${name} Shutdown
+name: Shutdown
+id: shutdown_switch

common/text_sensor/debug.yaml

@@ -1,6 +1,8 @@
 ---
 platform: debug
 device:
-  name: "${name} Device Info"
+  name: Device Info
+  id: device_info_sensor
 reset_reason:
-  name: "${name} Reset Reason"
+  name: Reset Reason
+  id: reset_reason_sensor

common/text_sensor/ethernet_info.yaml

@@ -1,8 +1,11 @@
 ---
 platform: ethernet_info
 ip_address:
-  name: ${name} IP Address
+  name: IP Address
+  id: ip_address_sensor
   address_1:
-    name: ${name} IP Address 1
+    name: IP Address 1
+    id: ip_address_1_sensor
   address_2:
-    name: ${name} IP Address 2
+    name: IP Address 2
+    id: ip_address_2_sensor

common/text_sensor/git_ref.yaml

@@ -1,6 +1,7 @@
 ---
 platform: git_ref
-name: "${name} Git Ref"
+name: Git Ref
+id: git_ref_sensor
 long: true
 all: true
 abbrev: 16

common/text_sensor/uptime.yaml

@@ -1,3 +1,4 @@
 ---
 platform: uptime
-name: ${name} Uptime
+name: Uptime
+id: uptime_sensor

common/text_sensor/version.yaml

@@ -1,3 +1,4 @@
 ---
 platform: version
-name: "${name} Version"
+name: Version
+id: version_sensor

common/text_sensor/wifi_info.yaml

@@ -1,17 +1,40 @@
 ---
 platform: wifi_info
 ip_address:
-  name: ${name} IP Address
+  name: IP Address
+  id: ip_address_sensor
   icon: mdi:ip-network
+  # address_0:
+  #   name: IP Address 0
+  #   icon: mdi:ip-network
   address_1:
-    name: ${name} IP Address 1
+    name: IP Address 1
+    id: ip_address_1_sensor
+    icon: mdi:ip-network
   address_2:
-    name: ${name} IP Address 2
+    name: IP Address 2
+    id: ip_address_2_sensor
+    icon: mdi:ip-network
+  # address_3:
+  #   name: IP Address 3
+  #   id: ip_address_3_sensor
+  #   icon: mdi:ip-network
+  # address_4:
+  #   name: IP Address 4
+  #   id: ip_address_4_sensor
+  #   icon: mdi:ip-network
 #ssid:
-#  name: ${name} SSID
+#  name: SSID
+#  id: ssid_sensor
 #bssid:
-#  name: ${name} BSSID
+#  name: BSSID
+#  id: bssid_sensor
 mac_address:
-  name: ${name} MAC
+  name: MAC
+  id: mac_address_sensor
 #scan_results:
-#  name: ${name} Latest Scan Results
+#  name: Latest Scan Results
+#  id: scan_results_sensor
+power_save_mode:
+  name: WiFi Power Save Mode
+  id: wifi_power_save_mode_sensor

common/vehicle_base.yaml

@@ -0,0 +1,106 @@
+esp32:
+  variant: esp32
+  toolchain: esp-idf
+  framework:
+    type: esp-idf
+
+external_components:
+  - source: components
+
+# PINOUTS: M5ATOM
+# IR        G12
+# NEO       G27
+# BUTTON    G39
+# I2C0 SDA  G26
+# I2C0 SCL  G32
+# I2C1 SDA  G25
+# I2C1 SCL  G21
+# UART0 RX  G3
+# UART0 TX  G1
+# UART1 RX  G23
+# UART1 TX  G33
+# 1-WIRE    G22
+# NC        G19
+
+esphome:
+  on_loop:
+    then:
+      lambda: |-
+        static uint32_t last_state = 0;
+        auto state = App.get_app_state();
+        if (state != last_state) {
+          if (state & STATUS_LED_ERROR) {
+            auto call = id(led).turn_on();
+            call.set_effect("ERROR");
+            call.perform();
+          } else if (state & STATUS_LED_WARNING) {
+            auto call = id(led).turn_on();
+            call.set_effect("BOOT");
+            call.perform();
+          } else {
+            auto call = id(led).turn_on();
+            call.set_effect("BEACON");
+            call.perform();
+          }
+          last_state = state;
+        }
+
+light:
+  - platform: esp32_rmt_led_strip
+    name: LED
+    id: led
+    rgb_order: GRB
+    pin: 27
+    num_leds: 1
+    chipset: ws2812
+    restore_mode: ALWAYS_OFF
+    effects:
+      - strobe:
+          name: "BEACON"
+          colors:
+            - state: true
+              red: 0%
+              green: 0%
+              blue: 50%
+              duration: 200ms
+            - state: false
+              duration: 200ms
+            - state: true
+              red: 0%
+              green: 0%
+              blue: 50%
+              duration: 200ms
+            - state: false
+              duration: 10s
+      - lambda:
+          name: "ERROR"
+          update_interval: 0.5s
+          lambda: |-
+            static bool state = false;
+            auto call = id(led).turn_on();
+            call.set_transition_length(500);
+            call.set_rgb(1, 0, 0);
+            if (!state) {
+              call.set_brightness(1);
+            } else {
+              // If using 0, it freaks Home Assistant UI.
+              call.set_brightness(0.01);
+            }
+            call.perform();
+            state = !state;
+      - lambda:
+          name: "BOOT"
+          update_interval: 0.5s
+          lambda: |-
+            static bool state = false;
+            auto call = id(led).turn_on();
+            call.set_transition_length(500);
+            call.set_rgb(0, 1, 0);
+            if (!state) {
+              call.set_brightness(1);
+            } else {
+              // If using 0, it freaks Home Assistant UI.
+              call.set_brightness(0.01);
+            }
+            call.perform();
+            state = !state;

common/wifi.yaml

@@ -6,3 +6,4 @@ wifi:
       password: !secret wifi_password
   enable_btm: true
   enable_rrm: true
+  min_auth_mode: WPA3

common/wifi_esp8266.yaml

@@ -6,3 +6,4 @@ wifi:
       password: !secret wifi_password
 #  enable_btm: true
 #  enable_rrm: true
+  min_auth_mode: WPA2

compile_prod.sh

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-export ESPHOME_IS_HA_ADDON=true
-
-while IFS=, read -r device
-do
-    esphome compile ${device}.yaml
-#    esphome upload ${device}.yaml --device ${device}.local
-#    esphome run ${device}.yaml
-done < devices_dev.csv
-# done < devices_prod.csv
-#done < devices_nspanel.csv

components/bm8563/__init__.py

@@ -1,24 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c
-from esphome.const import CONF_ID, CONF_SLEEP_DURATION
-
-DEPENDENCIES = ['i2c']
-
-CONF_I2C_ADDR = 0x51
-
-bm8563 = cg.esphome_ns.namespace('bm8563')
-BM8563 = bm8563.class_('BM8563', cg.Component, i2c.I2CDevice)
-
-CONFIG_SCHEMA = cv.Schema({
-    cv.GenerateID(): cv.declare_id(BM8563),
-    cv.Optional(CONF_SLEEP_DURATION): cv.positive_time_period_seconds,
-}).extend(cv.COMPONENT_SCHEMA).extend(i2c.i2c_device_schema(CONF_I2C_ADDR))
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    if CONF_SLEEP_DURATION in config:
-        cg.add(var.set_sleep_duration(config[CONF_SLEEP_DURATION]))
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)
-    

components/bm8563/bm8563.cpp

@@ -1,242 +0,0 @@
-#include "esphome/core/log.h"
-#include "esphome/components/i2c/i2c_bus.h"
-#include "bm8563.h"
-
-namespace esphome {
-namespace bm8563 {
-
-static const char *TAG = "bm8563.sensor";
-
-void BM8563::setup(){
-  this->write_byte_16(0,0);
-  this->setupComplete = true;
-  if (this->sleep_duration_.has_value()) {
-    SetAlarmIRQ(*this->sleep_duration_);
-  }
-}
-
-void BM8563::loop(){
-  // if(!this->setupComplete){
-  //   return;
-  // }
-  // BM8563_TimeTypeDef BM8563_TimeStruct;
-  // getTime(&BM8563_TimeStruct);
-  // this->publish_state(BM8563_TimeStruct.seconds);
-}
-
-void BM8563::dump_config(){
-  ESP_LOGCONFIG(TAG, "BM8563:");
-  ESP_LOGCONFIG(TAG, "  Address: 0x%02X", this->address_);
-  ESP_LOGCONFIG(TAG, "  setupComplete: %s", this->setupComplete ? "true" : "false");
-  if (this->sleep_duration_.has_value()) {
-    uint32_t duration = *this->sleep_duration_;
-    ESP_LOGCONFIG(TAG, "  Sleep Duration: %u ms", duration);
-  }
-}
-
-void BM8563::set_sleep_duration(uint32_t time_s) {
-  this->sleep_duration_ = uint64_t(time_s);
-  if (this->sleep_duration_.has_value()) {
-    SetAlarmIRQ(*this->sleep_duration_);
-  }
-}
-
-bool BM8563::getVoltLow() {
-  uint8_t data = ReadReg(0x02);
-  return data & 0x80; // RTCC_VLSEC_MASK
-}
-
-uint8_t BM8563::bcd2ToByte(uint8_t value) {
-  uint8_t tmp = 0;
-  tmp = ((uint8_t)(value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
-  return (tmp + (value & (uint8_t)0x0F));
-}
-
-uint8_t BM8563::byteToBcd2(uint8_t value) {
-  uint8_t bcdhigh = 0;
-
-  while (value >= 10) {
-    bcdhigh++;
-    value -= 10;
-  }
-
-  return ((uint8_t)(bcdhigh << 4) | value);
-}
-
-void BM8563::getTime(BM8563_TimeTypeDef* BM8563_TimeStruct) {
-  uint8_t buf[3] = {0};
-
-  this->read_register(0x02, buf, 3);
-
-  BM8563_TimeStruct->seconds = bcd2ToByte(buf[0] & 0x7f);
-  BM8563_TimeStruct->minutes = bcd2ToByte(buf[1] & 0x7f);
-  BM8563_TimeStruct->hours   = bcd2ToByte(buf[2] & 0x3f);
-}
-
-void BM8563::setTime(BM8563_TimeTypeDef* BM8563_TimeStruct) {
-  if (BM8563_TimeStruct == NULL) {
-    return;
-  }
-  uint8_t buf[3] = {byteToBcd2(BM8563_TimeStruct->seconds), byteToBcd2(BM8563_TimeStruct->minutes), byteToBcd2(BM8563_TimeStruct->hours)};
-
-  this->write_register(0x02, buf, 3);
-}
-
-void BM8563::getDate(BM8563_DateTypeDef* BM8563_DateStruct) {
-  uint8_t buf[4] = {0};
-  this->read_register(0x05, buf, 4);
-
-  BM8563_DateStruct->date    = bcd2ToByte(buf[0] & 0x3f);
-  BM8563_DateStruct->weekDay = bcd2ToByte(buf[1] & 0x07);
-  BM8563_DateStruct->month   = bcd2ToByte(buf[2] & 0x1f);
-
-  if (buf[2] & 0x80) {
-    BM8563_DateStruct->year = 1900 + bcd2ToByte(buf[3] & 0xff);
-  } else {
-    BM8563_DateStruct->year = 2000 + bcd2ToByte(buf[3] & 0xff);
-  }
-}
-
-void BM8563::setDate(BM8563_DateTypeDef* BM8563_DateStruct) {
-  if (BM8563_DateStruct == NULL) {
-    return;
-  }
-  uint8_t buf[4] = {byteToBcd2(BM8563_DateStruct->date), byteToBcd2(BM8563_DateStruct->weekDay), 0, byteToBcd2((uint8_t)(BM8563_DateStruct->year % 100))};
-
-
-  if (BM8563_DateStruct->year < 2000) {
-    buf[3] = byteToBcd2(BM8563_DateStruct->month) | 0x80;
-  } else {
-    buf[3] = byteToBcd2(BM8563_DateStruct->month) | 0x00;
-  }
-
-  this->write_register(0x05, buf, 4);
-}
-
-void BM8563::WriteReg(uint8_t reg, uint8_t data) {
-  this->write_byte(reg, data);
-}
-
-uint8_t BM8563::ReadReg(uint8_t reg) {
-  uint8_t data;
-  this->read_register(reg, &data, 1);
-  return data;
-}
-
-int BM8563::SetAlarmIRQ(int afterSeconds) {
-  uint8_t reg_value = 0;
-  reg_value = ReadReg(0x01);
-
-  if (afterSeconds < 0) {
-    reg_value &= ~(1 << 0);
-    WriteReg(0x01, reg_value);
-    reg_value = 0x03;
-    WriteReg(0x0E, reg_value);
-    return -1;
-  }
-
-  uint8_t type_value = 2;
-  uint8_t div = 1;
-  if (afterSeconds > 255) {
-    div = 60;
-    type_value = 0x83;
-  } else {
-    type_value = 0x82;
-  }
-
-  afterSeconds = (afterSeconds / div) & 0xFF;
-  WriteReg(0x0F, afterSeconds);
-  WriteReg(0x0E, type_value);
-
-  reg_value |= (1 << 0);
-  reg_value &= ~(1 << 7);
-  WriteReg(0x01, reg_value);
-  return afterSeconds * div;
-}
-
-int BM8563::SetAlarmIRQ(const BM8563_TimeTypeDef &BM8563_TimeStruct) {
-  uint8_t irq_enable = false;
-  uint8_t out_buf[4] = {0x80, 0x80, 0x80, 0x80};
-
-  if (BM8563_TimeStruct.minutes >= 0) {
-    irq_enable = true;
-    out_buf[0] = byteToBcd2(BM8563_TimeStruct.minutes) & 0x7f;
-  }
-
-  if (BM8563_TimeStruct.hours >= 0) {
-    irq_enable = true;
-    out_buf[1] = byteToBcd2(BM8563_TimeStruct.hours) & 0x3f;
-  }
-
-  out_buf[2] = 0x00;
-  out_buf[3] = 0x00;
-
-  uint8_t reg_value = ReadReg(0x01);
-
-  if (irq_enable) {
-    reg_value |= (1 << 1);
-  } else {
-    reg_value &= ~(1 << 1);
-  }
-
-  for (int i = 0; i < 4; i++) {
-    WriteReg(0x09 + i, out_buf[i]);
-  }
-  WriteReg(0x01, reg_value);
-
-  return irq_enable ? 1 : 0;
-}
-
-int BM8563::SetAlarmIRQ(const BM8563_DateTypeDef &BM8563_DateStruct, const BM8563_TimeTypeDef &BM8563_TimeStruct) {
-  uint8_t irq_enable = false;
-  uint8_t out_buf[4] = {0x80, 0x80, 0x80, 0x80};
-
-  if (BM8563_TimeStruct.minutes >= 0) {
-    irq_enable = true;
-    out_buf[0] = byteToBcd2(BM8563_TimeStruct.minutes) & 0x7f;
-  }
-
-  if (BM8563_TimeStruct.hours >= 0) {
-    irq_enable = true;
-    out_buf[1] = byteToBcd2(BM8563_TimeStruct.hours) & 0x3f;
-  }
-
-  if (BM8563_DateStruct.date >= 0) {
-    irq_enable = true;
-    out_buf[2] = byteToBcd2(BM8563_DateStruct.date) & 0x3f;
-  }
-
-  if (BM8563_DateStruct.weekDay >= 0) {
-    irq_enable = true;
-    out_buf[3] = byteToBcd2(BM8563_DateStruct.weekDay) & 0x07;
-  }
-
-  uint8_t reg_value = ReadReg(0x01);
-
-  if (irq_enable) {
-    reg_value |= (1 << 1);
-  } else {
-    reg_value &= ~(1 << 1);
-  }
-
-  for (int i = 0; i < 4; i++) {
-    WriteReg(0x09 + i, out_buf[i]);
-  }
-  WriteReg(0x01, reg_value);
-
-  return irq_enable ? 1 : 0;
-}
-
-void BM8563::clearIRQ() {
-  uint8_t data = ReadReg(0x01);
-  WriteReg(0x01, data & 0xf3);
-}
-
-void BM8563::disableIRQ() {
-  clearIRQ();
-  uint8_t data = ReadReg(0x01);
-  WriteReg(0x01, data & 0xfC);
-}
-
-}  // namespace bm8563
-}  // namespace esphome

components/bm8563/bm8563.h

@@ -1,62 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
-
-
-namespace esphome {
-namespace bm8563 {
-
-typedef struct
-{
-  int8_t hours;
-  int8_t minutes;
-  int8_t seconds;
-} BM8563_TimeTypeDef;
-
-typedef struct
-{
-  int8_t weekDay;
-  int8_t month;
-  int8_t date;
-  int16_t year;
-} BM8563_DateTypeDef;
-
-class BM8563 : public Component, public i2c::I2CDevice {
-  public:
-    void setup() override;
-    void loop() override;
-    void dump_config() override;
-    
-    void set_sleep_duration(uint32_t time_ms);
-
-    bool getVoltLow();
-
-    void getTime(BM8563_TimeTypeDef* BM8563_TimeStruct);
-    void getDate(BM8563_DateTypeDef* BM8563_DateStruct);
-
-    void setTime(BM8563_TimeTypeDef* BM8563_TimeStruct);
-    void setDate(BM8563_DateTypeDef* BM8563_DateStruct);
-
-    int SetAlarmIRQ(int afterSeconds);
-    int SetAlarmIRQ(const BM8563_TimeTypeDef &BM8563_TimeStruct);
-    int SetAlarmIRQ(const BM8563_DateTypeDef &BM8563_DateStruct, const BM8563_TimeTypeDef &BM8563_TimeStruct);
-
-    void clearIRQ();
-    void disableIRQ();
-
-    void WriteReg(uint8_t reg, uint8_t data);
-    uint8_t ReadReg(uint8_t reg);
-
-  private:
-    uint8_t bcd2ToByte(uint8_t value);
-    uint8_t byteToBcd2(uint8_t value);
-
-    uint8_t trdata[7];
-    optional<uint64_t> sleep_duration_;
-    bool setupComplete;
-};
-
-}  // namespace bm8563
-}  // namespace esphome

components/m5stack_4relay/__init__.py

@@ -1,30 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c
-from esphome.const import CONF_ID
-
-DEPENDENCIES = ["i2c"]
-MULTI_CONF = True
-AUTO_LOAD = ["switch"]
-CODEOWNERS = ["@brotherdust"]
-
-m5stack_4relay_ns = cg.esphome_ns.namespace("m5stack_4relay")
-M5STACK4RELAYOutput = m5stack_4relay_ns.class_(
-    "M5STACK4RELAYSwitchComponent", cg.Component, i2c.I2CDevice
-)
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(M5STACK4RELAYOutput),
-        }
-    )
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(i2c.i2c_device_schema(0x26))
-)
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)

components/m5stack_4relay/m5stack_4relay.cpp

@@ -1,49 +0,0 @@
-#include "m5stack_4relay.h"
-#include <bitset>
-#include "esphome/core/log.h"
-namespace esphome {
-namespace m5stack_4relay {
-static const char *const TAG = "m5stack_4relay.switch";
-
-void M5STACK4RELAYSwitchComponent::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up M5STACK4RELAY (0x%02X)...", this->address_);
-  component_status = 0;
-  get_status(&component_status);
-  ESP_LOGD(TAG, "Setup Status 0x%02X", component_status);
-}
-
-M5STACK4RELAYChannel *M5STACK4RELAYSwitchComponent::create_channel(uint8_t channel) {
-  return new M5STACK4RELAYChannel(this, channel);
-}
-
-void M5STACK4RELAYSwitchComponent::get_status(uint8_t *state) { this->read_byte(RELAY_CONTROL_REG); }
-
-bool M5STACK4RELAYSwitchComponent::set_channel_value_(uint8_t channel, bool state) {
-  get_status(&component_status);
-
-  ESP_LOGD(TAG, "Current status 0x%02X", component_status);
-  ESP_LOGD(TAG, "Desired channel: %1u", channel);
-  ESP_LOGD(TAG, "Desired state: %1u", state);
-
-  channel = 3 - channel;
-  if (state) {
-    component_status |= (1u << channel);
-  } else {
-    component_status &= ~(1u << channel);
-  }
-
-  ESP_LOGD(TAG, "New status 0x%02X", component_status);
-
-  return this->write_byte(this->address_, RELAY_CONTROL_REG, component_status);
-}
-
-void M5STACK4RELAYChannel::write_state(bool state) {
-  if (!this->set_channel_value_(this->channel_, state)) {
-    publish_state(false);
-  } else {
-    publish_state(state);
-  }
-}
-
-}  // namespace m5stack_4relay
-}  // namespace esphome

components/m5stack_4relay/m5stack_4relay.h

@@ -1,49 +0,0 @@
-#pragma once
-
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/components/switch/switch.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace m5stack_4relay {
-
-class M5STACK4RELAYSwitchComponent;
-class M5STACK4RELAYChannel : public switch_::Switch {
- public:
-  M5STACK4RELAYChannel(M5STACK4RELAYSwitchComponent *parent, uint8_t channel) : parent_(parent), channel_(channel) {}
-
- protected:
-  void write_state(bool state) override;
-
-  M5STACK4RELAYSwitchComponent *parent_;
-  uint8_t channel_;
-};
-
-class M5STACK4RELAYSwitchComponent : public Component, public i2c::I2CDevice {
- public:
-  const uint8_t MODE_CONTROL_REG = 0x10;
-  const uint8_t RELAY_CONTROL_REG = 0x11;
-  uint8_t component_status;
-  M5STACK4RELAYSwitchComponent() {}
-  M5STACK4RELAYChannel *create_channel(uint8_t channel);
-
-  void setup() override;
-  float get_setup_priority() const override { return setup_priority::HARDWARE; }
-
- protected:
-  friend M5STACK4RELAYChannel;
-
-  void get_status(uint8_t *state);
-
-  bool set_channel_value_(uint8_t channel, bool state);
-
-  bool read_bytes_(uint8_t a_register, uint8_t *data, uint8_t len, uint32_t conversion) {
-    return this->raw_receive(this->address_, data, len);
-  }
-
-  float value_;
-};
-
-}  // namespace m5stack_4relay
-}  // namespace esphome

components/m5stack_4relay/switch.py

@@ -1,25 +0,0 @@
-import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome.components import switch
-from esphome.const import CONF_ID, CONF_CHANNEL
-from . import M5STACK4RELAYOutput, m5stack_4relay_ns
-
-DEPENDENCIES = ["m5stack_4relay"]
-
-M5STACK4RELAYChannel = m5stack_4relay_ns.class_("M5STACK4RELAYChannel", switch.Switch)
-CONF_M5STACK_4RELAY_ID = "m5stack_4relay_id"
-
-CONFIG_SCHEMA = switch.SWITCH_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(M5STACK4RELAYChannel),
-        cv.GenerateID(CONF_M5STACK_4RELAY_ID): cv.use_id(M5STACK4RELAYOutput),
-        cv.Required(CONF_CHANNEL): cv.int_range(min=0, max=3),
-    }
-)
-
-
-async def to_code(config):
-    paren = await cg.get_variable(config[CONF_M5STACK_4RELAY_ID])
-    rhs = paren.create_channel(config[CONF_CHANNEL])
-    var = cg.Pvariable(config[CONF_ID], rhs)
-    await switch.register_switch(var, config)

components/notes.txt

@@ -1 +0,0 @@
-https://github.com/TomG736/esphome-BM8563

components/pca9536d/README.md

@@ -1,28 +0,0 @@
-# PCA9536D i2c I/O expander
-
-Requires a configured i2c bus
-
-Example:
-```yaml
-pca9536d:
-  - id: my_pca
-
-switch:
-  - platform: gpio
-    pin:
-      pca9536d: my_pca
-      number: 0
-    id: relay
-
-binary_sensor:
-  - platform: gpio
-    pin:
-      pca9536d: my_pca
-      number: 1
-    id: button
-```
-
-# Optional parameters
-
-`address:` defaults to 0x41
-

components/pca9536d/__init__.py

@@ -1,69 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import i2c
-from esphome.const import (
-    CONF_ID,
-    CONF_INPUT,
-    CONF_INVERTED,
-    CONF_NUMBER,
-    CONF_MODE,
-    CONF_OUTPUT,
-)
-
-DEPENDENCIES = ["i2c"]
-MULTI_CONF = True
-
-CONF_PCA9536D = "pca9536d"
-
-pca9536d_ns = cg.esphome_ns.namespace("pca9536d")
-PCA9536DGPIOMode = pca9536d_ns.enum("PCA9536DGPIOMode")
-
-PCA9536D = pca9536d_ns.class_("PCA9536D", cg.Component, i2c.I2CDevice)
-PCA9536DGPIOPin = pca9536d_ns.class_("PCA9536DGPIOPin", cg.GPIOPin)
-
-CONFIG_SCHEMA = cv.COMPONENT_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(PCA9536D),
-    }
-).extend(i2c.i2c_device_schema(0x41))
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-def validate_mode(value):
-    if not (value[CONF_INPUT] or value[CONF_OUTPUT]):
-        raise cv.Invalid("Mode must be either input or output")
-    if value[CONF_INPUT] and value[CONF_OUTPUT]:
-        raise cv.Invalid("Mode must be either input or output")
-    return value
-
-PCA9536D_PIN_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(): cv.declare_id(PCA9536DGPIOPin),
-        cv.Required(CONF_PCA9536D): cv.use_id(PCA9536D),
-        cv.Required(CONF_NUMBER): cv.int_range(min=0, max=7),
-        cv.Optional(CONF_MODE, default={}): cv.All(
-            {
-                cv.Optional(CONF_INPUT, default=False): cv.boolean,
-                cv.Optional(CONF_OUTPUT, default=False): cv.boolean,
-            },
-            validate_mode,
-        ),
-        cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-    }
-)
-
-@pins.PIN_SCHEMA_REGISTRY.register(CONF_PCA9536D, PCA9536D_PIN_SCHEMA)
-async def pca9536d_pin_to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    parent = await cg.get_variable(config[CONF_PCA9536D])
-
-    cg.add(var.set_parent(parent))
-    cg.add(var.set_pin(config[CONF_NUMBER]))
-    cg.add(var.set_inverted(config[CONF_INVERTED]))
-    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
-    return var
-

components/pca9536d/pca9536d.cpp

@@ -1,108 +0,0 @@
-#include "pca9536d.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace pca9536d {
-
-static const char *TAG = "pca9536d";
-
-void PCA9536D::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCA9536D...");
-  if (!this->read_gpio_()) {
-    ESP_LOGE(TAG, "PCA9536D not available under 0x%02X", this->address_);
-    this->mark_failed();
-    return;
-  }
-
-  this->write_gpio_();
-}
-
-void PCA9536D::dump_config() {
-  ESP_LOGCONFIG(TAG, "PCA9536D:");
-  LOG_I2C_DEVICE(this)
-  if (this->is_failed())
-    ESP_LOGE(TAG, "Communication with PCA9536D failed!");
-}
-
-bool PCA9536D::digital_read(uint8_t pin) {
-  this->read_gpio_();
-  return this->inputs_ & (1 << pin);
-}
-
-void PCA9536D::digital_write(uint8_t pin, bool value) {
-  if (value)
-    this->outputs_ |= (1 << pin);
-  else
-    this->outputs_ &= ~(1 << pin);
-  this->write_gpio_();
-}
-
-void PCA9536D::set_pin_mode(uint8_t pin, uint8_t mode) {
-  switch (mode) {
-    case gpio::FLAG_INPUT:
-      this->modes_ |= 1 << pin;
-      break;
-    case gpio::FLAG_OUTPUT:
-      this->modes_ &= ~(1 << pin);
-      break;
-  }
-  this->set_modes_();
-}
-
-bool PCA9536D::read_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data;
-  if (!this->read_bytes(0, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->inputs_ = data;
-  this->status_clear_warning();
-  return true;
-}
-
-bool PCA9536D::write_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data = this->outputs_;
-  if (!this->write_bytes(1, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->status_clear_warning();
-  return true;
-}
-
-bool PCA9536D::set_modes_() {
-  if (this->is_failed())
-    return false;
-
-  uint8_t data = this->modes_;
-  if (!this->write_bytes(3, &data, 1)) {
-    this->status_set_warning();
-    return false;
-  }
-
-  this->status_clear_warning();
-  return true;
-}
-
-void PCA9536DGPIOPin::setup() { this->pin_mode(this->flags_); }
-
-bool PCA9536DGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
-
-void PCA9536DGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
-
-void PCA9536DGPIOPin::pin_mode(gpio::Flags flags) { this->parent_->set_pin_mode(this->pin_, flags); }
-
-std::string PCA9536DGPIOPin::dump_summary() const {
-  return str_sprintf("%u via PCA9536D", pin_);
-}
-
-}  // namespace pca9536d
-}  // namespace esphome

components/pca9536d/pca9536d.h

@@ -1,52 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/core/hal.h"
-#include "esphome/components/i2c/i2c.h"
-
-namespace esphome {
-namespace pca9536d {
-
-class PCA9536D: public Component, public i2c::I2CDevice {
- public:
-  void setup() override;
-  float get_setup_priority() const { return setup_priority::IO; }
-  void dump_config() override;
-
-  bool digital_read(uint8_t pin);
-  void digital_write(uint8_t pin, bool value);
-  void set_pin_mode(uint8_t pin, uint8_t mode);
-
- protected:
-  bool read_gpio_();
-  bool write_gpio_();
-  bool set_modes_();
-
-  // pin modes - 0 means output, 1 means input
-  uint8_t modes_{0xff};
-  uint8_t outputs_{0x00};
-  uint8_t inputs_{0x00};
-};
-
-class PCA9536DGPIOPin : public GPIOPin {
- public:
-  void setup() override;
-  void pin_mode(gpio::Flags flags) override;
-  bool digital_read() override;
-  void digital_write(bool value) override;
-  std::string dump_summary() const override;
-
-  void set_parent(PCA9536D *parent) { parent_ = parent; }
-  void set_pin(uint8_t pin) { pin_ = pin; }
-  void set_inverted(bool inverted) { inverted_ = inverted; }
-  void set_flags(gpio::Flags flags) { flags_ = flags; }
-
- protected:
-  PCA9536D *parent_;
-  uint8_t pin_;
-  bool inverted_;
-  gpio::Flags flags_;
-};
-
-}  // namespace pca9536d
-}  // namespace esphome

components/pca9554_2/__init__.py

@@ -1,57 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import i2c
-from esphome.const import CONF_ID, CONF_NUMBER, CONF_MODE, CONF_INVERTED
-
-DEPENDENCIES = ['i2c']
-MULTI_CONF = True
-
-pca9554_ns = cg.esphome_ns.namespace('pca9554')
-PCA9554GPIOMode = pca9554_ns.enum('PCA9554GPIOMode')
-PCF8674_GPIO_MODES = {
-    'INPUT': PCA9554GPIOMode.PCA9554_INPUT,
-    'OUTPUT': PCA9554GPIOMode.PCA9554_OUTPUT,
-}
-
-PCA9554Component = pca9554_ns.class_('PCA9554Component', cg.Component, i2c.I2CDevice)
-PCA9554GPIOPin = pca9554_ns.class_('PCA9554GPIOPin', cg.GPIOPin)
-
-CONF_PCA9554 = 'pca9554'
-CONF_PCF8575 = 'pcf8575'
-CONFIG_SCHEMA = cv.Schema({
-    cv.Required(CONF_ID): cv.declare_id(PCA9554Component),
-    cv.Optional(CONF_PCF8575, default=False): cv.boolean,
-}).extend(cv.COMPONENT_SCHEMA).extend(i2c.i2c_device_schema(0x20))
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)
-    cg.add(var.set_pcf8575(config[CONF_PCF8575]))
-
-
-def validate_pca9554_gpio_mode(value):
-    value = cv.string(value)
-    return cv.enum(PCF8674_GPIO_MODES, upper=True)(value)
-
-
-PCA9554_OUTPUT_PIN_SCHEMA = cv.Schema({
-    cv.Required(CONF_PCA9554): cv.use_id(PCA9554Component),
-    cv.Required(CONF_NUMBER): cv.int_,
-    cv.Optional(CONF_MODE, default="OUTPUT"): validate_pca9554_gpio_mode,
-    cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-})
-PCA9554_INPUT_PIN_SCHEMA = cv.Schema({
-    cv.Required(CONF_PCA9554): cv.use_id(PCA9554Component),
-    cv.Required(CONF_NUMBER): cv.int_,
-    cv.Optional(CONF_MODE, default="INPUT"): validate_pca9554_gpio_mode,
-    cv.Optional(CONF_INVERTED, default=False): cv.boolean,
-})
-
-
-@pins.PIN_SCHEMA_REGISTRY.register('pca9554', (PCA9554_OUTPUT_PIN_SCHEMA, PCA9554_INPUT_PIN_SCHEMA))
-def pca9554_pin_to_code(config):
-    parent = yield cg.get_variable(config[CONF_PCA9554])
-    yield PCA9554GPIOPin.new(parent, config[CONF_NUMBER], config[CONF_MODE], config[CONF_INVERTED])

components/pca9554_2/pca9554.cpp

@@ -1,96 +0,0 @@
-#include "pca9554.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace pca9554 {
-
-static const char *TAG = "pca9554";
-
-void PCA9554Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up PCA9554...");
-  if (!this->read_gpio_()) {
-    ESP_LOGE(TAG, "PCA9554 not available under 0x%02X", this->address_);
-    this->mark_failed();
-    return;
-  }
-
-  this->write_gpio_();
-  this->read_gpio_();
-}
-void PCA9554Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "PCA9554:");
-  LOG_I2C_DEVICE(this)
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with PCA9554 failed!");
-  }
-}
-bool PCA9554Component::digital_read(uint8_t pin) {
-  this->read_gpio_();
-  return this->input_mask_ & (1 << pin);
-}
-void PCA9554Component::digital_write(uint8_t pin, bool value) {
-  if (value) {
-    this->output_mask_ |= (1 << pin);
-  } else {
-    this->output_mask_ &= ~(1 << pin);
-  }
-
-  this->write_gpio_();
-}
-void PCA9554Component::pin_mode(uint8_t pin, uint8_t mode) {
-  switch (mode) {
-    case PCA9554_OUTPUT:
-      // Clear mode mask bit
-      this->mode_mask_ &= ~(1 << pin);
-      // Write GPIO to enable input mode
-      this->write_gpio_();
-      break;
-    case PCA9554_INPUT:
-      // Set mode mask bit
-      this->mode_mask_ |= 1 << pin;
-      break;
-    default:
-      break;
-  }
-}
-bool PCA9554Component::read_gpio_() {
-  if (this->is_failed())
-    return false;
-  bool success;
-  uint8_t data[2];
-
-  if (!success) {
-    this->status_set_warning();
-    return false;
-  }
-  this->status_clear_warning();
-  return true;
-}
-bool PCA9554Component::write_gpio_() {
-  if (this->is_failed())
-    return false;
-
-  uint16_t value = 0;
-  // Pins in OUTPUT mode and where pin is HIGH.
-  value |= this->mode_mask_ & this->output_mask_;
-  // Pins in INPUT mode must also be set here
-  value |= ~this->mode_mask_;
-
-  uint8_t data[2];
-  data[0] = value;
-  data[1] = value >> 8;
-
-  this->status_clear_warning();
-  return true;
-}
-float PCA9554Component::get_setup_priority() const { return setup_priority::IO; }
-
-void PCA9554GPIOPin::setup() { this->pin_mode(this->mode_); }
-bool PCA9554GPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
-void PCA9554GPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
-void PCA9554GPIOPin::pin_mode(uint8_t mode) { this->parent_->pin_mode(this->pin_, mode); }
-PCA9554GPIOPin::PCA9554GPIOPin(PCA9554Component *parent, uint8_t pin, uint8_t mode, bool inverted)
-    : GPIOPin(pin, mode, inverted), parent_(parent) {}
-
-}  // namespace pca9554
-}  // namespace esphome

components/pca9554_2/pca9554.h

@@ -1,61 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/core/esphal.h"
-#include "esphome/components/i2c/i2c.h"
-
-namespace esphome {
-namespace pca9554 {
-
-/// Modes for PCA9554 pins
-enum PCA9554GPIOMode : uint8_t {
-  PCA9554_INPUT = INPUT,
-  PCA9554_OUTPUT = OUTPUT,
-};
-
-class PCA9554Component : public Component, public i2c::I2CDevice {
- public:
-  PCA9554Component() = default;
-
-  /// Check i2c availability and setup masks
-  void setup() override;
-  /// Helper function to read the value of a pin.
-  bool digital_read(uint8_t pin);
-  /// Helper function to write the value of a pin.
-  void digital_write(uint8_t pin, bool value);
-  /// Helper function to set the pin mode of a pin.
-  void pin_mode(uint8_t pin, uint8_t mode);
-
-  float get_setup_priority() const override;
-
-  void dump_config() override;
-
- protected:
-  bool read_gpio_();
-
-  bool write_gpio_();
-
-  /// Mask for the pin mode - 1 means input, 0 means output
-  uint16_t mode_mask_{0x00};
-  /// The mask to write as output state - 1 means HIGH, 0 means LOW
-  uint16_t output_mask_{0x00};
-  /// The state read in read_gpio_ - 1 means HIGH, 0 means LOW
-  uint16_t input_mask_{0x00};
-};
-
-/// Helper class to expose a PCA9554 pin as an internal input GPIO pin.
-class PCA9554GPIOPin : public GPIOPin {
- public:
-  PCA9554GPIOPin(PCA9554Component *parent, uint8_t pin, uint8_t mode, bool inverted = false);
-
-  void setup() override;
-  void pin_mode(uint8_t mode) override;
-  bool digital_read() override;
-  void digital_write(bool value) override;
-
- protected:
-  PCA9554Component *parent_;
-};
-
-}  // namespace pca9554
-}  // namespace esphome

components/st7735/__init__.py

@@ -1,3 +0,0 @@
-import esphome.codegen as cg
-
-st7735_ns = cg.esphome_ns.namespace('st7735')

components/st7735/display.py

@@ -1,41 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import display, spi
-from esphome.const import CONF_ID, CONF_LAMBDA
-from esphome.const import CONF_DC_PIN, CONF_CS_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
-from esphome.const import CONF_EXTERNAL_VCC, CONF_LAMBDA, CONF_MODEL, CONF_RESET_PIN, \
-    CONF_BRIGHTNESS
-from . import st7735_ns
-
-DEPENDENCIES = ['spi']
-
-ST7735 = st7735_ns.class_('ST7735', cg.PollingComponent, spi.SPIDevice)
-ST7735Ref = ST7735.operator('ref')
-
-CONFIG_SCHEMA = display.FULL_DISPLAY_SCHEMA.extend({
-    cv.GenerateID(): cv.declare_id(ST7735),
-    cv.Required(CONF_RESET_PIN): pins.gpio_output_pin_schema,
-    cv.Required(CONF_DC_PIN): pins.gpio_output_pin_schema,
-    cv.Required(CONF_CS_PIN): pins.gpio_output_pin_schema,
-    cv.Optional(CONF_BRIGHTNESS, default=1.0): cv.percentage,
-}).extend(cv.polling_component_schema('1s')).extend(spi.spi_device_schema())
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield spi.register_spi_device(var, config)
-
-    dc = yield cg.gpio_pin_expression(config[CONF_DC_PIN])
-    cg.add(var.set_dc_pin(dc))
-
-    reset = yield cg.gpio_pin_expression(config[CONF_RESET_PIN])
-    cg.add(var.set_reset_pin(reset))
-
-    if CONF_LAMBDA in config:
-        lambda_ = yield cg.process_lambda(
-            config[CONF_LAMBDA], [(display.DisplayBufferRef, 'it')], return_type=cg.void)
-        cg.add(var.set_writer(lambda_))
-
-    yield display.register_display(var, config)

components/st7735/st7735.cpp

@@ -1,351 +0,0 @@
-#include "st7735.h"
-#include "esphome/core/log.h"
-#include "esphome/components/display/display_buffer.h"
-
-namespace esphome {
-namespace st7735 {
-
-#define ST_CMD_DELAY      0x80    // special signifier for command lists
-
-#define ST77XX_NOP        0x00
-#define ST77XX_SWRESET    0x01
-#define ST77XX_RDDID      0x04
-#define ST77XX_RDDST      0x09
-
-#define ST77XX_SLPIN      0x10
-#define ST77XX_SLPOUT     0x11
-#define ST77XX_PTLON      0x12
-#define ST77XX_NORON      0x13
-
-#define ST77XX_INVOFF     0x20
-#define ST77XX_INVON      0x21
-#define ST77XX_DISPOFF    0x28
-#define ST77XX_DISPON     0x29
-#define ST77XX_CASET      0x2A
-#define ST77XX_RASET      0x2B
-#define ST77XX_RAMWR      0x2C
-#define ST77XX_RAMRD      0x2E
-
-#define ST77XX_PTLAR      0x30
-#define ST77XX_TEOFF      0x34
-#define ST77XX_TEON       0x35
-#define ST77XX_MADCTL     0x36
-#define ST77XX_COLMOD     0x3A
-
-#define ST77XX_MADCTL_MY  0x80
-#define ST77XX_MADCTL_MX  0x40
-#define ST77XX_MADCTL_MV  0x20
-#define ST77XX_MADCTL_ML  0x10
-#define ST77XX_MADCTL_RGB 0x00
-
-#define ST77XX_RDID1      0xDA
-#define ST77XX_RDID2      0xDB
-#define ST77XX_RDID3      0xDC
-#define ST77XX_RDID4      0xDD
-
-
-// some flags for initR() :(
-#define INITR_GREENTAB    0x00
-#define INITR_REDTAB      0x01
-#define INITR_BLACKTAB    0x02
-#define INITR_18GREENTAB  INITR_GREENTAB
-#define INITR_18REDTAB    INITR_REDTAB
-#define INITR_18BLACKTAB  INITR_BLACKTAB
-#define INITR_144GREENTAB 0x01
-#define INITR_MINI160x80  0x04
-#define INITR_HALLOWING   0x05
-
-// Some register settings
-#define ST7735_MADCTL_BGR 0x08
-#define ST7735_MADCTL_MH  0x04
-
-#define ST7735_FRMCTR1    0xB1
-#define ST7735_FRMCTR2    0xB2
-#define ST7735_FRMCTR3    0xB3
-#define ST7735_INVCTR     0xB4
-#define ST7735_DISSET5    0xB6
-
-#define ST7735_PWCTR1     0xC0
-#define ST7735_PWCTR2     0xC1
-#define ST7735_PWCTR3     0xC2
-#define ST7735_PWCTR4     0xC3
-#define ST7735_PWCTR5     0xC4
-#define ST7735_VMCTR1     0xC5
-
-#define ST7735_PWCTR6     0xFC
-
-#define ST7735_GMCTRP1    0xE0
-#define ST7735_GMCTRN1    0xE1
-
-static const uint8_t PROGMEM
-    Rcmd1[] = {                       // 7735R init, part 1 (red or green tab)
-        15,                             // 15 commands in list:
-        ST77XX_SWRESET,   ST_CMD_DELAY, //  1: Software reset, 0 args, w/delay
-        150,                          //     150 ms delay
-        ST77XX_SLPOUT,    ST_CMD_DELAY, //  2: Out of sleep mode, 0 args, w/delay
-        255,                          //     500 ms delay
-        ST7735_FRMCTR1, 3,              //  3: Framerate ctrl - normal mode, 3 arg:
-        0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
-        ST7735_FRMCTR2, 3,              //  4: Framerate ctrl - idle mode, 3 args:
-        0x01, 0x2C, 0x2D,             //     Rate = fosc/(1x2+40) * (LINE+2C+2D)
-        ST7735_FRMCTR3, 6,              //  5: Framerate - partial mode, 6 args:
-        0x01, 0x2C, 0x2D,             //     Dot inversion mode
-        0x01, 0x2C, 0x2D,             //     Line inversion mode
-        ST7735_INVCTR,  1,              //  6: Display inversion ctrl, 1 arg:
-        0x07,                         //     No inversion
-        ST7735_PWCTR1,  3,              //  7: Power control, 3 args, no delay:
-        0xA2,
-        0x02,                         //     -4.6V
-        0x84,                         //     AUTO mode
-        ST7735_PWCTR2,  1,              //  8: Power control, 1 arg, no delay:
-        0xC5,                         //     VGH25=2.4C VGSEL=-10 VGH=3 * AVDD
-        ST7735_PWCTR3,  2,              //  9: Power control, 2 args, no delay:
-        0x0A,                         //     Opamp current small
-        0x00,                         //     Boost frequency
-        ST7735_PWCTR4,  2,              // 10: Power control, 2 args, no delay:
-        0x8A,                         //     BCLK/2,
-        0x2A,                         //     opamp current small & medium low
-        ST7735_PWCTR5,  2,              // 11: Power control, 2 args, no delay:
-        0x8A, 0xEE,
-        ST7735_VMCTR1,  1,              // 12: Power control, 1 arg, no delay:
-        0x0E,
-        ST77XX_INVOFF,  0,              // 13: Don't invert display, no args
-        ST77XX_MADCTL,  1,              // 14: Mem access ctl (directions), 1 arg:
-        0xC8,                         //     row/col addr, bottom-top refresh
-        ST77XX_COLMOD,  1,              // 15: set color mode, 1 arg, no delay:
-        0x05 },                       //     16-bit color
-
-    Rcmd2green[] = {                  // 7735R init, part 2 (green tab only)
-        2,                              //  2 commands in list:
-        ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
-        0x00, 0x02,                   //     XSTART = 0
-        0x00, 0x7F+0x02,              //     XEND = 127
-        ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
-        0x00, 0x01,                   //     XSTART = 0
-        0x00, 0x9F+0x01 },            //     XEND = 159
-    Rcmd2green144[] = {               // 7735R init, part 2 (green 1.44 tab)
-        2,                              //  2 commands in list:
-        ST77XX_CASET,   4,              //  1: Column addr set, 4 args, no delay:
-        0x00, 0x00,                   //     XSTART = 0
-        0x00, 0x7F,                   //     XEND = 127
-        ST77XX_RASET,   4,              //  2: Row addr set, 4 args, no delay:
-        0x00, 0x00,                   //     XSTART = 0
-        0x00, 0x7F },                 //     XEND = 127
-    Rcmd3[] = {                       // 7735R init, part 3 (red or green tab)
-        4,                              //  4 commands in list:
-        ST7735_GMCTRP1, 16      ,       //  1: Gamma Adjustments (pos. polarity), 16 args + delay:
-        0x02, 0x1c, 0x07, 0x12,       //     (Not entirely necessary, but provides
-        0x37, 0x32, 0x29, 0x2d,       //      accurate colors)
-        0x29, 0x25, 0x2B, 0x39,
-        0x00, 0x01, 0x03, 0x10,
-        ST7735_GMCTRN1, 16      ,       //  2: Gamma Adjustments (neg. polarity), 16 args + delay:
-        0x03, 0x1d, 0x07, 0x06,       //     (Not entirely necessary, but provides
-        0x2E, 0x2C, 0x29, 0x2D,       //      accurate colors)
-        0x2E, 0x2E, 0x37, 0x3F,
-        0x00, 0x00, 0x02, 0x10,
-        ST77XX_NORON,     ST_CMD_DELAY, //  3: Normal display on, no args, w/delay
-        10,                           //     10 ms delay
-        ST77XX_DISPON,    ST_CMD_DELAY, //  4: Main screen turn on, no args w/delay
-        100 };                        //     100 ms delay        
-
-static const char *TAG = "st7735";
-
-void ST7735::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up SPI ST7735...");
-  this->spi_setup();
-  this->dc_pin_->setup();  // OUTPUT
-
-  this->init_reset_();
-  
-  this->displayInit(Rcmd1);
-  this->displayInit(Rcmd2green);
-  this->displayInit(Rcmd3);
-  this->writecommand(ST7735_INVON);
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-  //this->disable();
-  delay(120);
-  //this->enable();
-
-  this->writecommand(ST7735_DISPON);    //Display on
-  delay(120);
-  
-  this->init_internal_(this->get_buffer_length_());
-  memset(this->buffer_, 0x00, this->get_buffer_length_());
-}
-
-void ST7735::write_display_data() {
-  
-  uint16_t offsetx = 26; 
-  uint16_t offsety = 1; 
-
-  uint16_t x1 = offsetx;
-  uint16_t x2 = x1 + get_width_internal()-1;
-  uint16_t y1 = offsety;
-  uint16_t y2 = y1 + get_height_internal()-1;
-	
-	this->enable();
-
-	// set column(x) address
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_CASET);
-	this->dc_pin_->digital_write(true);
-	this->spi_master_write_addr(x1, x2);
-	
-	// set Page(y) address
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_RASET);
-	this->dc_pin_->digital_write(true);
-	this->spi_master_write_addr(y1, y2);
-
-	//  Memory Write
-	this->dc_pin_->digital_write(false);
-	this->write_byte(ST77XX_RAMWR);
-	this->dc_pin_->digital_write(true);
-
-	this->write_array(this->buffer_, this->get_buffer_length_());
-
-	this->disable();
-}
-
-void ST7735::spi_master_write_addr(uint16_t addr1, uint16_t addr2)
-{
-	static uint8_t Byte[4];
-	Byte[0] = (addr1 >> 8) & 0xFF;
-	Byte[1] = addr1 & 0xFF;
-	Byte[2] = (addr2 >> 8) & 0xFF;
-	Byte[3] = addr2 & 0xFF;
-
-	
-	this->dc_pin_->digital_write(true);
-	this->write_array(Byte, 4);
-	
-}
-
-void ST7735::spi_master_write_color(uint16_t color, uint16_t size)
-{
-	static uint8_t Byte[1024];
-	int index = 0;
-	for(int i=0;i<size;i++) {
-		Byte[index++] = (color >> 8) & 0xFF;
-		Byte[index++] = color & 0xFF;
-	}
-
-	this->dc_pin_->digital_write(true);
-	return write_array(Byte, size*2);
-
-}
-
-
-void ST7735::dump_config() {
-  LOG_DISPLAY("", "SPI ST7735", this);
-  LOG_PIN("  CS Pin: ", this->cs_);
-  LOG_PIN("  DC Pin: ", this->dc_pin_);
-  LOG_PIN("  Reset Pin: ", this->reset_pin_);
-  LOG_UPDATE_INTERVAL(this);
-}
-
-float ST7735::get_setup_priority() const { 
-	return setup_priority::PROCESSOR; 
-}
-
-void ST7735::update() {
-  this->do_update_();
-  this->write_display_data();
-}
-
-void ST7735::loop() {
-
-}
-
-int ST7735::get_width_internal() {
-	return 80;
-}
-
-int ST7735::get_height_internal() {
-	return 160;
-}
-
-size_t ST7735::get_buffer_length_() {
-  return size_t(this->get_width_internal()) * size_t(this->get_height_internal()) * 2;
-}
-
-void HOT ST7735::draw_absolute_pixel_internal(int x, int y, Color color) {
-  if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0)
-    return;
-  const uint32_t color565 = color.to_rgb_565();
-  // where should the bits go in the big buffer array? math...
-  uint16_t pos = (x + y * this->get_width_internal()) * 2;
-  this->buffer_[pos++] = (color565 >> 8) & 0xff;
-  this->buffer_[pos] = color565 & 0xff;
-}
-
-void ST7735::displayInit(const uint8_t *addr) {
-
-  uint8_t  numCommands, cmd, numArgs;
-  uint16_t ms;
-
-  numCommands = pgm_read_byte(addr++);   // Number of commands to follow
-  while(numCommands--) {                 // For each command...
-    cmd = pgm_read_byte(addr++);         // Read command
-    numArgs  = pgm_read_byte(addr++);    // Number of args to follow
-    ms       = numArgs & ST_CMD_DELAY;   // If hibit set, delay follows args
-    numArgs &= ~ST_CMD_DELAY;            // Mask out delay bit
-    this->sendcommand(cmd, addr, numArgs);
-    addr += numArgs;
-
-    if(ms) {
-      ms = pgm_read_byte(addr++); // Read post-command delay time (ms)
-      if(ms == 255) ms = 500;     // If 255, delay for 500 ms
-      delay(ms);
-    }
-  }
-}
-
-void ST7735::init_reset_() {
-  if (this->reset_pin_ != nullptr) {
-    this->reset_pin_->setup();
-    this->reset_pin_->digital_write(true);
-    delay(1);
-    // Trigger Reset
-    this->reset_pin_->digital_write(false);
-    delay(10);
-    // Wake up
-    this->reset_pin_->digital_write(true);
-  }
-}
-
-void ST7735::writecommand(uint8_t value) {
-  this->enable();
-  this->dc_pin_->digital_write(false);
-  this->write_byte(value);
-  this->dc_pin_->digital_write(true);
-  this->disable();
-}
-
-void ST7735::writedata(uint8_t value) {
-  this->dc_pin_->digital_write(true);
-  this->enable();
-  this->write_byte(value);
-  this->disable();
-}
-
-void ST7735::sendcommand(uint8_t cmd, const uint8_t* dataBytes, uint8_t numDataBytes) { 
-  this->writecommand(cmd);
-  this->senddata(dataBytes,numDataBytes);
-}
-
-void ST7735::senddata(const uint8_t* dataBytes, uint8_t numDataBytes) {
-  this->dc_pin_->digital_write(true); //pull DC high to indicate data
-  this->cs_->digital_write(false);
-  this->enable();
-  for (uint8_t i=0; i<numDataBytes; i++) {
-    this->transfer_byte(pgm_read_byte(dataBytes++));  //write byte - SPI library
-  }
-  this->cs_->digital_write(true);
-  this->disable();
-
-}
-
-}  // namespace st7735
-}  // namespace esphome

components/st7735/st7735.h

@@ -1,149 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/spi/spi.h"
-#include "esphome/components/display/display_buffer.h"
-
-// ST7735 specific commands used in init
-#define ST7735_NOP			0x00
-#define ST7735_SWRESET		0x01
-#define ST7735_RDDID		0x04
-#define ST7735_RDDST		0x09
-
-#define ST7735_RDDPM		0x0A      // Read display power mode
-#define ST7735_RDD_MADCTL	0x0B      // Read display MADCTL
-#define ST7735_RDD_COLMOD	0x0C      // Read display pixel format
-#define ST7735_RDDIM		0x0D      // Read display image mode
-#define ST7735_RDDSM		0x0E      // Read display signal mode
-#define ST7735_RDDSR		0x0F      // Read display self-diagnostic result (ST7735)
-
-#define ST7735_SLPIN		0x10
-#define ST7735_SLPOUT		0x11
-#define ST7735_PTLON		0x12
-#define ST7735_NORON		0x13
-
-#define ST7735_INVOFF		0x20
-#define ST7735_INVON		0x21
-#define ST7735_GAMSET		0x26      // Gamma set
-#define ST7735_DISPOFF		0x28
-#define ST7735_DISPON		0x29
-#define ST7735_CASET		0x2A
-#define ST7735_RASET		0x2B
-#define ST7735_RAMWR		0x2C
-#define ST7735_RGBSET		0x2D      // Color setting for 4096, 64K and 262K colors
-#define ST7735_RAMRD		0x2E
-
-#define ST7735_PTLAR		0x30
-#define ST7735_VSCRDEF		0x33      // Vertical scrolling definition (ST7735)
-#define ST7735_TEOFF		0x34      // Tearing effect line off
-#define ST7735_TEON			0x35      // Tearing effect line on
-#define ST7735_MADCTL		0x36      // Memory data access control
-#define ST7735_IDMOFF		0x38      // Idle mode off
-#define ST7735_IDMON		0x39      // Idle mode on
-#define ST7735_RAMWRC		0x3C      // Memory write continue (ST7735)
-#define ST7735_RAMRDC		0x3E      // Memory read continue (ST7735)
-#define ST7735_COLMOD		0x3A
-
-#define ST7735_RAMCTRL		0xB0      // RAM control
-#define ST7735_RGBCTRL		0xB1      // RGB control
-#define ST7735_PORCTRL		0xB2      // Porch control
-#define ST7735_FRCTRL1		0xB3      // Frame rate control
-#define ST7735_PARCTRL		0xB5      // Partial mode control
-#define ST7735_GCTRL		0xB7      // Gate control
-#define ST7735_GTADJ		0xB8      // Gate on timing adjustment
-#define ST7735_DGMEN		0xBA      // Digital gamma enable
-#define ST7735_VCOMS		0xBB      // VCOMS setting
-#define ST7735_LCMCTRL		0xC0      // LCM control
-#define ST7735_IDSET		0xC1      // ID setting
-#define ST7735_VDVVRHEN		0xC2      // VDV and VRH command enable
-#define ST7735_VRHS			0xC3      // VRH set
-#define ST7735_VDVSET		0xC4      // VDV setting
-#define ST7735_VCMOFSET		0xC5      // VCOMS offset set
-#define ST7735_FRCTR2		0xC6      // FR Control 2
-#define ST7735_CABCCTRL		0xC7      // CABC control
-#define ST7735_REGSEL1		0xC8      // Register value section 1
-#define ST7735_REGSEL2		0xCA      // Register value section 2
-#define ST7735_PWMFRSEL		0xCC      // PWM frequency selection
-#define ST7735_PWCTRL1		0xD0      // Power control 1
-#define ST7735_VAPVANEN		0xD2      // Enable VAP/VAN signal output
-#define ST7735_CMD2EN		0xDF      // Command 2 enable
-#define ST7735_PVGAMCTRL	0xE0      // Positive voltage gamma control
-#define ST7735_NVGAMCTRL	0xE1      // Negative voltage gamma control
-#define ST7735_DGMLUTR		0xE2      // Digital gamma look-up table for red
-#define ST7735_DGMLUTB		0xE3      // Digital gamma look-up table for blue
-#define ST7735_GATECTRL		0xE4      // Gate control
-#define ST7735_SPI2EN		0xE7      // SPI2 enable
-#define ST7735_PWCTRL2		0xE8      // Power control 2
-#define ST7735_EQCTRL		0xE9      // Equalize time control
-#define ST7735_PROMCTRL		0xEC      // Program control
-#define ST7735_PROMEN		0xFA      // Program mode enable
-#define ST7735_NVMSET		0xFC      // NVM setting
-#define ST7735_PROMACT		0xFE      // Program action
-
-// Some ready-made 16-bit ('565') color settings:
-#define ST77XX_BLACK      0x0000
-#define ST77XX_WHITE      0xFFFF
-#define ST77XX_RED        0xF800
-#define ST77XX_GREEN      0x07E0
-#define ST77XX_BLUE       0x001F
-#define ST77XX_CYAN       0x07FF
-#define ST77XX_MAGENTA    0xF81F
-#define ST77XX_YELLOW     0xFFE0
-#define ST77XX_ORANGE     0xFC00
-
-// Some ready-made 16-bit ('565') color settings:
-#define ST7735_BLACK      ST77XX_BLACK
-#define ST7735_WHITE      ST77XX_WHITE
-#define ST7735_RED        ST77XX_RED
-#define ST7735_GREEN      ST77XX_GREEN
-#define ST7735_BLUE       ST77XX_BLUE
-#define ST7735_CYAN       ST77XX_CYAN
-#define ST7735_MAGENTA    ST77XX_MAGENTA
-#define ST7735_YELLOW     ST77XX_YELLOW
-#define ST7735_ORANGE     ST77XX_ORANGE
-
-namespace esphome {
-namespace st7735 {
-
-class ST7735 : public PollingComponent, public display::DisplayBuffer, 
-                 public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH, spi::CLOCK_PHASE_TRAILING,
-                                         spi::DATA_RATE_8MHZ> {
- public:
-  void set_dc_pin(GPIOPin *dc_pin) { this->dc_pin_ = dc_pin; }
-  void set_reset_pin(GPIOPin *reset_pin) { this->reset_pin_ = reset_pin; }
-  
-  // ========== INTERNAL METHODS ==========
-  // (In most use cases you won't need these)
-  void setup() override;
-  void dump_config() override;
-  float get_setup_priority() const override;
-  void update() override;
-  void loop() override;
-  
-  void write_display_data();
-  
- protected:
-  GPIOPin *dc_pin_;
-  GPIOPin *reset_pin_{nullptr};
-  
-  void displayInit(const uint8_t *addr);
-  void sendcommand(uint8_t cmd, const uint8_t* dataBytes, uint8_t numDataBytes);
-  void senddata(const uint8_t* dataBytes, uint8_t numDataBytes);
-
-  void init_reset_();
-  void writecommand(uint8_t value);
-  void writedata(uint8_t value);
-  
-  void spi_master_write_addr(uint16_t addr1, uint16_t addr2);
-  void spi_master_write_color(uint16_t color, uint16_t size);
-  
-  void draw_absolute_pixel_internal(int x, int y, Color color) override;
-
-  int get_height_internal() override;
-  int get_width_internal() override;
-  size_t get_buffer_length_();
-};
-
-
-}  // namespace st7735
-}  // namespace esphome

custom_components/AXP2101_component.h

@@ -1,116 +0,0 @@
-#include "esphome.h"
-
-#define XPOWERS_CHIP_AXP2101
-#include "XPowersLib.h"
-
-#ifdef I2C_SDA
-#undef I2C_SDA
-#endif
-
-#ifdef I2C_SCL
-#undef I2C_SCL
-#endif
-
-#define I2C_SDA                     (7)
-#define I2C_SCL                     (6)
-
-
-
-class AXP2101Component : public Component {
- public:
-  void setup() override {
-    // This will be called once to set up the component
-    // think of it as the setup() call in Arduino
-    ESP_LOGD("custom", "Custom component setup");
-    
-    if (!PMU.begin(Wire, AXP2101_SLAVE_ADDRESS, I2C_SDA, I2C_SCL)) {
-        Serial.println("Failed to initialize power.....");
-        while (1) {
-            delay(5000);
-        }
-    }
-
-    // Set VSY off voltage as 2600mV , Adjustment range 2600mV ~ 3300mV
-    PMU.setSysPowerDownVoltage(2600);
-
-    //Turn off not use power channel
-    PMU.disableDC2();
-    PMU.disableDC3();
-    PMU.disableDC4();
-    PMU.disableDC5();
-
-    PMU.disableALDO1();
-    PMU.disableALDO2();
-    PMU.disableALDO3();
-    PMU.disableALDO4();
-    PMU.disableBLDO1();
-    PMU.disableBLDO2();
-
-    PMU.disableCPUSLDO();
-    PMU.disableDLDO1();
-    PMU.disableDLDO2();
-    // Board 5 Pin socket 3.3V power output control
-    PMU.setDC3Voltage(3100);         //Extern 3100~ 3400V
-    PMU.enableDC3();
-
-    // Camera working voltage, please do not change
-    PMU.setALDO1Voltage(1500);      // CAM DVDD
-    PMU.enableALDO1();
-
-    // Camera working voltage, please do not change
-    PMU.setALDO2Voltage(3000);      // CAM DVDD
-    PMU.enableALDO2();
-
-    // Camera working voltage, please do not change
-    PMU.setALDO4Voltage(3000);      // CAM AVDD
-    PMU.enableALDO4();
-
-    // Pyroelectric sensor working voltage, please do not change
-    PMU.setALDO3Voltage(3300);        // PIR VDD
-    PMU.enableALDO3();
-
-    // Microphone working voltage, please do not change
-    PMU.setBLDO1Voltage(3300);       // MIC VDD
-    PMU.enableBLDO1();
-
-    PMU.clearIrqStatus();
-
-    PMU.enableVbusVoltageMeasure();
-    PMU.enableBattVoltageMeasure();
-    PMU.enableSystemVoltageMeasure();
-    PMU.disableTemperatureMeasure();
-
-    // TS Pin detection must be disable, otherwise it cannot be charged
-    PMU.disableTSPinMeasure();
-
-    // Disable all interrupts
-    PMU.disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
-    // Clear all interrupt flags
-    PMU.clearIrqStatus();
-    // Enable the required interrupt function
-    PMU.enableIRQ(
-        XPOWERS_AXP2101_BAT_INSERT_IRQ    | XPOWERS_AXP2101_BAT_REMOVE_IRQ      |   //BATTERY
-        XPOWERS_AXP2101_VBUS_INSERT_IRQ   | XPOWERS_AXP2101_VBUS_REMOVE_IRQ     |   //VBUS
-        XPOWERS_AXP2101_PKEY_SHORT_IRQ    | XPOWERS_AXP2101_PKEY_LONG_IRQ       |   //POWER KEY
-        XPOWERS_AXP2101_BAT_CHG_DONE_IRQ  | XPOWERS_AXP2101_BAT_CHG_START_IRQ       //CHARGE
-        // XPOWERS_PKEY_NEGATIVE_IRQ | XPOWERS_PKEY_POSITIVE_IRQ   |   //POWER KEY
-    );
-
-    // TS Pin detection must be disable, otherwise it cannot be charged
-    PMU.disableTSPinMeasure();
-    // Set the precharge charging current
-    PMU.setPrechargeCurr(XPOWERS_AXP2101_PRECHARGE_50MA);
-    // Set constant current charge current limit
-    PMU.setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_300MA);
-    // Set stop charging termination current
-    PMU.setChargerTerminationCurr(XPOWERS_AXP2101_CHG_ITERM_25MA);
-
-    // Set charge cut-off voltage
-    PMU.setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V1);
-
-    // Set the time of pressing the button to turn off
-    PMU.setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S); 
-  }
-  private:
-    XPowersPMU  PMU;
-};

custom_components/AXP2101_component.yaml

@@ -1,102 +0,0 @@
-esphome:
-  name: camera-2
-  platformio_options:
-    build_flags: "-DBOARD_HAS_PSRAM -UARDUINO_USB_CDC_ON_BOOT"
-    upload_speed: 921600
-    monitor_speed: 115200
-  friendly_name: "Camera 2"
-  libraries:
-    - XPowersLib=https://github.com/lewisxhe/XPowersLib.git
-    - "Wire"
-  includes:
-    - AXP2101_component.h
-
-custom_component:
-  - lambda: |-
-      auto axp2101 = new AXP2101Component();
-      return {axp2101};
-    components:
-      - id: axp2101
-
-esp32:
-  board: esp32s3box
-  framework:
-    type: arduino
-
-# Enable Home Assistant API
-api:
-  encryption:
-    key: "XXX"  # Replace with your API encryption key
-
-ota:
-  password: "XXX"  # Replace with your OTA password
-
-wifi:
-  ssid: !secret wifi_ssid  # Replace with your Wi-Fi SSID stored in secrets.yaml
-  password: !secret wifi_password  # Replace with your Wi-Fi password stored in secrets.yaml
-
-  # Enable fallback hotspot (captive portal) in case Wi-Fi connection fails
-  ap:
-    ssid: "Esp32-S3 Fallback Hotspot"
-    password: "XXX"  # Replace with your fallback hotspot password
-
-binary_sensor:
-  - platform: gpio
-    pin: GPIO17
-    name: "ttgocam2 PIR"
-    device_class: motion
-
-sensor:
-  - platform: wifi_signal
-    name: "ttgocam2 WiFi Signal"
-    update_interval: 60s
-
-time:
-  - platform: homeassistant
-    id: homeassistant_time
-
-font:
-  - file: "nanum.ttf"
-    id: tnr1
-    size: 17
-
-web_server:
-  version: 2
-
-i2c:
-  sda: GPIO07
-  scl: GPIO06
-  frequency: 200kHz
-
-esp32_camera:
-  name: camera-2
-  external_clock:
-    pin: GPIO38
-    frequency: 20MHz
-  i2c_pins:
-    sda: GPIO05
-    scl: GPIO04
-  data_pins: [GPIO14, GPIO47, GPIO48, GPIO21, GPIO13, GPIO11, GPIO10, GPIO09]
-  vsync_pin: GPIO8
-  href_pin: GPIO18
-  pixel_clock_pin: GPIO12
-  vertical_flip: false
-  horizontal_mirror: false
-  resolution: 1024x768
-
-esp32_camera_web_server:
-  - port: 8080
-    mode: stream
-  - port: 8081
-    mode: snapshot
-
-display:
-  - platform: ssd1306_i2c
-    update_interval: 2s
-    model: "SSD1306 128x64"
-    address: 0x3C
-    rotation: 180
-    lambda: |-
-      // Display current date and time
-      it.strftime(64, 0, id(tnr1), TextAlign::TOP_CENTER, "%m-%d-%Y", id(homeassistant_time).now());
-      it.strftime(64, 44, id(tnr1), TextAlign::BASELINE_CENTER, "%I:%M:%S%p", id(homeassistant_time).now());

custom_components/ads1100/__init__.py

@@ -1,31 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c
-from esphome.const import CONF_ID
-
-DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "voltage_sampler"]
-MULTI_CONF = True
-
-ads1100_ns = cg.esphome_ns.namespace("ads1100")
-ADS1100Component = ads1100_ns.class_("ADS1100Component", cg.Component, i2c.I2CDevice)
-
-CONF_CONTINUOUS_MODE = "continuous_mode"
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(ADS1100Component),
-            cv.Optional(CONF_CONTINUOUS_MODE, default=False): cv.boolean,
-        }
-    )
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(i2c.i2c_device_schema(None))
-)
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-    cg.add(var.set_continuous_mode(config[CONF_CONTINUOUS_MODE]))

custom_components/ads1100/ads1100.cpp

@@ -1,170 +0,0 @@
-#include "ads1100.h"
-#include "esphome/core/log.h"
-#include "esphome/core/hal.h"
-
-namespace esphome {
-namespace ads1100 {
-
-static const char *const TAG = "ads1100";
-static const uint8_t ADS1100_REGISTER_CONVERSION = 0x00;
-static const uint8_t ADS1100_REGISTER_CONFIG = 0x01;
-
-static const uint8_t ADS1100_DATA_RATE_860_SPS = 0b111;
-
-void ADS1100Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up ADS1100...");
-  uint16_t value;
-  if (!this->read_byte_16(ADS1100_REGISTER_CONVERSION, &value)) {
-    this->mark_failed();
-    return;
-  }
-  uint16_t config = 0;
-  // Clear single-shot bit
-  //        0b0xxxxxxxxxxxxxxx
-  config |= 0b0000000000000000;
-  // Setup multiplexer
-  //        0bx000xxxxxxxxxxxx
-  config |= ADS1100_MULTIPLEXER_8 << 12;
-
-  // Setup Gain
-  //        0bxxxx000xxxxxxxxx
-  config |= ADS1100_GAIN_6P144 << 9;
-
-  if (this->continuous_mode_) {
-    // Set continuous mode
-    //        0bxxxxxxx0xxxxxxxx
-    config |= 0b0000000000000000;
-  } else {
-    // Set singleshot mode
-    //        0bxxxxxxx1xxxxxxxx
-    config |= 0b0000000100000000;
-  }
-
-  // Set data rate - 860 samples per second (we're in singleshot mode)
-  //        0bxxxxxxxx100xxxxx
-  config |= ADS1100_DATA_RATE_860_SPS << 5;
-
-  // Set comparator mode - hysteresis
-  //        0bxxxxxxxxxxx0xxxx
-  config |= 0b0000000000000000;
-
-  // Set comparator polarity - active low
-  //        0bxxxxxxxxxxxx0xxx
-  config |= 0b0000000000000000;
-
-  // Set comparator latch enabled - false
-  //        0bxxxxxxxxxxxxx0xx
-  config |= 0b0000000000000000;
-
-  // Set comparator que mode - disabled
-  //        0bxxxxxxxxxxxxxx11
-  config |= 0b0000000000000011;
-
-  if (!this->write_byte_16(ADS1100_REGISTER_CONFIG, config)) {
-    this->mark_failed();
-    return;
-  }
-  this->prev_config_ = config;
-}
-void ADS1100Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "Setting up ADS1100...");
-  LOG_I2C_DEVICE(this);
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with ADS1100 failed!");
-  }
-
-  for (auto *sensor : this->sensors_) {
-    LOG_SENSOR("  ", "Sensor", sensor);
-    ESP_LOGCONFIG(TAG, "    Rate: %u", sensor->get_rate());
-    ESP_LOGCONFIG(TAG, "    Gain: %u", sensor->get_gain());
-  }
-}
-float ADS1100Component::request_measurement(ADS1100Sensor *sensor) {
-  uint16_t config = this->prev_config_;
-  // Multiplexer
-  //        0bxBBBxxxxxxxxxxxx
-  config &= 0b1000111111111111;
-  config |= (sensor->get_multiplexer() & 0b111) << 12;
-
-  // Gain
-  //        0bxxxxBBBxxxxxxxxx
-  config &= 0b1111000111111111;
-  config |= (sensor->get_gain() & 0b111) << 9;
-
-  if (!this->continuous_mode_) {
-    // Start conversion
-    config |= 0b1000000000000000;
-  }
-
-  if (!this->continuous_mode_ || this->prev_config_ != config) {
-    if (!this->write_byte_16(ADS1100_REGISTER_CONFIG, config)) {
-      this->status_set_warning();
-      return NAN;
-    }
-    this->prev_config_ = config;
-
-    // about 1.2 ms with 860 samples per second
-    delay(2);
-
-    // in continuous mode, conversion will always be running, rely on the delay
-    // to ensure conversion is taking place with the correct settings
-    // can we use the rdy pin to trigger when a conversion is done?
-    if (!this->continuous_mode_) {
-      uint32_t start = millis();
-      while (this->read_byte_16(ADS1100_REGISTER_CONFIG, &config) && (config >> 15) == 0) {
-        if (millis() - start > 100) {
-          ESP_LOGW(TAG, "Reading ADS1100 timed out");
-          this->status_set_warning();
-          return NAN;
-        }
-        yield();
-      }
-    }
-  }
-
-  uint16_t raw_conversion;
-  if (!this->read_byte_16(ADS1100_REGISTER_CONVERSION, &raw_conversion)) {
-    this->status_set_warning();
-    return NAN;
-  }
-  auto signed_conversion = static_cast<int16_t>(raw_conversion);
-
-  float millivolts;
-  switch (sensor->get_gain()) {
-    case ADS1100_GAIN_6P144:
-      millivolts = signed_conversion * 0.187500f;
-      break;
-    case ADS1100_GAIN_4P096:
-      millivolts = signed_conversion * 0.125000f;
-      break;
-    case ADS1100_GAIN_2P048:
-      millivolts = signed_conversion * 0.062500f;
-      break;
-    case ADS1100_GAIN_1P024:
-      millivolts = signed_conversion * 0.031250f;
-      break;
-    case ADS1100_GAIN_0P512:
-      millivolts = signed_conversion * 0.015625f;
-      break;
-    case ADS1100_GAIN_0P256:
-      millivolts = signed_conversion * 0.007813f;
-      break;
-    default:
-      millivolts = NAN;
-  }
-
-  this->status_clear_warning();
-  return millivolts / 1e3f;
-}
-
-float ADS1100Sensor::sample() { return this->parent_->request_measurement(this); }
-void ADS1100Sensor::update() {
-  float v = this->parent_->request_measurement(this);
-  if (!std::isnan(v)) {
-    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
-    this->publish_state(v);
-  }
-}
-
-}  // namespace ads1100
-}  // namespace esphome

custom_components/ads1100/ads1100.h

@@ -1,76 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/components/voltage_sampler/voltage_sampler.h"
-
-namespace esphome {
-namespace ads1100 {
-
-enum ADS1100OSMode {
-  ADS1100_OSMODE_SINGLE  = 0x80,
-  ADS1100_OSMODE_BUSY    = 0x00,
-  ADS1100_OSMODE_NOTBUSY = 0x80,
-};
-
-enum ADS1100Mode {
-  ADS1100_MODE_CONTINUOUS  = 0x00,
-  ADS1100_MODE_SINGLE      = 0x10,
-};
-
-enum ADS1100Rate {
-  ADS1100_RATE_128 = 0x00,
-  ADS1100_RATE_32  = 0x04,
-  ADS1100_RATE_16  = 0x08,
-  ADS1100_RATE_8   = 0x0c,
-};
-
-enum ADS1100Gain {
-  ADS1100_GAIN_1  = 0x01,
-  ADS1100_GAIN_2  = 0x02,
-  ADS1100_GAIN_4  = 0x03,
-  ADS1100_GAIN_8  = 0x04,
-};
-
-class ADS1100Sensor;
-
-class ADS1100Component : public Component, public i2c::I2CDevice {
- public:
-  void register_sensor(ADS1100Sensor *obj) { this->sensors_.push_back(obj); }
-  /// Set up the internal sensor array.
-  void setup() override;
-  void dump_config() override;
-  /// HARDWARE_LATE setup priority
-  float get_setup_priority() const override { return setup_priority::DATA; }
-  void set_continuous_mode(bool continuous_mode) { continuous_mode_ = continuous_mode; }
-
-  /// Helper method to request a measurement from a sensor.
-  float request_measurement(ADS1100Sensor *sensor);
-
- protected:
-  std::vector<ADS1100Sensor *> sensors_;
-  uint16_t prev_config_{0};
-  bool continuous_mode_;
-};
-
-/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
-class ADS1100Sensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
- public:
-  ADS1100Sensor(ADS1100Component *parent) : parent_(parent) {}
-  void update() override;
-  void set_rate(ADS1100Rate rate) { rate_ = rate; }
-  void set_gain(ADS1100Gain gain) { gain_ = gain; }
-
-  float sample() override;
-  uint8_t get_rate() const { return rate_; }
-  uint8_t get_gain() const { return gain_; }
-
- protected:
-  ADS1100Component *parent_;
-  ADS1100Rate rate_;
-  ADS1100Gain gain_;
-};
-
-}  // namespace ads1100
-}  // namespace esphome

custom_components/ads1100/sensor.py

@@ -1,81 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import sensor, voltage_sampler
-from esphome.const import (
-    CONF_GAIN,
-    CONF_MULTIPLEXER,
-    DEVICE_CLASS_VOLTAGE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
-    CONF_ID,
-)
-from . import ads1100_ns, ADS1100Component
-
-DEPENDENCIES = ["ads1100"]
-
-ADS1100Multiplexer = ads1100_ns.enum("ADS1100Multiplexer")
-MUX = {
-    "A0_A1": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P0_N1,
-    "A0_A3": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P0_N3,
-    "A1_A3": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P1_N3,
-    "A2_A3": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P2_N3,
-    "A0_GND": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P0_NG,
-    "A1_GND": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P1_NG,
-    "A2_GND": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P2_NG,
-    "A3_GND": ADS1100Multiplexer.ADS1100_MULTIPLEXER_P3_NG,
-}
-
-ADS1100Gain = ads1100_ns.enum("ADS1100Gain")
-GAIN = {
-    "6.144": ADS1100Gain.ADS1100_GAIN_6P144,
-    "4.096": ADS1100Gain.ADS1100_GAIN_4P096,
-    "2.048": ADS1100Gain.ADS1100_GAIN_2P048,
-    "1.024": ADS1100Gain.ADS1100_GAIN_1P024,
-    "0.512": ADS1100Gain.ADS1100_GAIN_0P512,
-    "0.256": ADS1100Gain.ADS1100_GAIN_0P256,
-}
-
-
-def validate_gain(value):
-    if isinstance(value, float):
-        value = f"{value:0.03f}"
-    elif not isinstance(value, str):
-        raise cv.Invalid(f'invalid gain "{value}"')
-
-    return cv.enum(GAIN)(value)
-
-
-ADS1100Sensor = ads1100_ns.class_(
-    "ADS1100Sensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
-)
-
-CONF_ADS1100_ID = "ads1100_id"
-CONFIG_SCHEMA = (
-    sensor.sensor_schema(
-        unit_of_measurement=UNIT_VOLT,
-        accuracy_decimals=3,
-        device_class=DEVICE_CLASS_VOLTAGE,
-        state_class=STATE_CLASS_MEASUREMENT,
-    )
-    .extend(
-        {
-            cv.GenerateID(): cv.declare_id(ADS1100Sensor),
-            cv.GenerateID(CONF_ADS1100_ID): cv.use_id(ADS1100Component),
-            cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
-            cv.Required(CONF_GAIN): validate_gain,
-        }
-    )
-    .extend(cv.polling_component_schema("60s"))
-)
-
-
-async def to_code(config):
-    paren = await cg.get_variable(config[CONF_ADS1100_ID])
-    var = cg.new_Pvariable(config[CONF_ID], paren)
-    await sensor.register_sensor(var, config)
-    await cg.register_component(var, config)
-
-    cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
-    cg.add(var.set_gain(config[CONF_GAIN]))
-
-    cg.add(paren.register_sensor(var))

custom_components/axp192_disable/axp192.cpp

@@ -1,531 +0,0 @@
-#include "axp192.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace axp192 {
-
-static const char *TAG = "axp192.sensor";
-
-void AXP192Component::setup() 
-{
-  begin(false, false, false, false, false);
-}
-
-void AXP192Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "AXP192:");
-  LOG_I2C_DEVICE(this);
-  LOG_SENSOR("  ", "Battery Level", this->batterylevel_sensor_);
-}
-
-float AXP192Component::get_setup_priority() const { return setup_priority::DATA; }
-
-void AXP192Component::update() {
-
-    if (this->batterylevel_sensor_ != nullptr) {
-      // To be fixed
-      // This is not giving the right value - mostly there to have some sample sensor...
-      float vbat = GetBatVoltage();
-      float batterylevel = 100.0 * ((vbat - 3.0) / (4.1 - 3.0));
-
-      ESP_LOGD(TAG, "Got Battery Level=%f (%f)", batterylevel, vbat);
-      if (batterylevel > 100.) {
-        batterylevel = 100;
-      }
-      this->batterylevel_sensor_->publish_state(batterylevel);
-    }
-
-    UpdateBrightness();
-}
-
-
-void AXP192Component::begin(bool disableLDO2, bool disableLDO3, bool disableRTC, bool disableDCDC1, bool disableDCDC3)
-{  
-    // Set LDO2 & LDO3(TFT_LED & TFT) 3.0V
-    Write1Byte(0x28, 0xcc);	
-
-    // Set ADC sample rate to 200hz
-    Write1Byte(0x84, 0b11110010);
-    
-    // Set ADC to All Enable
-    Write1Byte(0x82, 0xff);
-
-    // Bat charge voltage to 4.2, Current 100MA
-    Write1Byte(0x33, 0xc0);
-
-    // Depending on configuration enable LDO2, LDO3, DCDC1, DCDC3.
-    byte buf = (Read8bit(0x12) & 0xef) | 0x4D;
-    if(disableLDO3) buf &= ~(1<<3);
-    if(disableLDO2) buf &= ~(1<<2);
-    if(disableDCDC3) buf &= ~(1<<1);
-    if(disableDCDC1) buf &= ~(1<<0);
-    Write1Byte(0x12, buf);	
-    
-    // 128ms power on, 4s power off
-    Write1Byte(0x36, 0x0C);
-
-    if(!disableRTC)
-    {
-        // Set RTC voltage to 3.3V
-        Write1Byte(0x91, 0xF0);	
-
-        // Set GPIO0 to LDO
-        Write1Byte(0x90, 0x02);
-    }
-
-    // Disable vbus hold limit
-    Write1Byte(0x30, 0x80);
-
-    // Set temperature protection
-    Write1Byte(0x39, 0xfc);
-    
-    // Enable RTC BAT charge 
-    Write1Byte(0x35, 0xa2 & (disableRTC ? 0x7F : 0xFF));
-    
-    // Enable bat detection
-    Write1Byte(0x32, 0x46);
-}
-
-void AXP192Component::Write1Byte( uint8_t Addr ,  uint8_t Data )
-{
-    this->write_byte(Addr, Data);
-}
-
-uint8_t AXP192Component::Read8bit( uint8_t Addr )
-{
-    uint8_t data;
-    this->read_byte(Addr, &data);
-    return data;
-}
-
-uint16_t AXP192Component::Read12Bit( uint8_t Addr)
-{
-    uint16_t Data = 0;
-    uint8_t buf[2];
-    ReadBuff(Addr,2,buf);
-    Data = ((buf[0] << 4) + buf[1]); //
-    return Data;
-}
-
-uint16_t AXP192Component::Read13Bit( uint8_t Addr)
-{
-    uint16_t Data = 0;
-    uint8_t buf[2];
-    ReadBuff(Addr,2,buf);
-    Data = ((buf[0] << 5) + buf[1]); //
-    return Data;
-}
-
-uint16_t AXP192Component::Read16bit( uint8_t Addr )
-{
-    uint32_t ReData = 0;
-    uint8_t Buff[2];
-    this->read_bytes(Addr, Buff, sizeof(Buff));
-    for( int i = 0 ; i < sizeof(Buff) ; i++ )
-    {
-        ReData <<= 8;
-        ReData |= Buff[i];
-    }
-    return ReData;
-}
-
-uint32_t AXP192Component::Read24bit( uint8_t Addr )
-{
-    uint32_t ReData = 0;
-    uint8_t Buff[3];
-    this->read_bytes(Addr, Buff, sizeof(Buff));
-    for( int i = 0 ; i < sizeof(Buff) ; i++ )
-    {
-        ReData <<= 8;
-        ReData |= Buff[i];
-    }
-    return ReData;
-}
-
-uint32_t AXP192Component::Read32bit( uint8_t Addr )
-{
-    uint32_t ReData = 0;
-    uint8_t Buff[4];
-    this->read_bytes(Addr, Buff, sizeof(Buff));
-    for( int i = 0 ; i < sizeof(Buff) ; i++ )
-    {
-        ReData <<= 8;
-        ReData |= Buff[i];
-    }
-    return ReData;
-}
-
-void AXP192Component::ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff )
-{
-    this->read_bytes(Addr, Buff, Size);
-}
-
-void AXP192Component::UpdateBrightness()
-{
-    ESP_LOGD(TAG, "Brightness=%f (Curr: %f)", brightness_, curr_brightness_);
-    if (brightness_ == curr_brightness_)
-    {
-        return;
-    }
-    curr_brightness_ = brightness_;
-
-    const uint8_t c_min = 7;
-    const uint8_t c_max = 12;
-    auto ubri = c_min + static_cast<uint8_t>(brightness_ * (c_max - c_min));
-    
-    if (ubri > c_max) 
-    {
-        ubri = c_max;
-    }
-    uint8_t buf = Read8bit( 0x28 );
-    Write1Byte( 0x28 , ((buf & 0x0f) | (ubri << 4)) );
-}
-
-bool AXP192Component::GetBatState()
-{
-    if( Read8bit(0x01) | 0x20 )
-        return true;
-    else
-        return false;
-}
-
-uint8_t AXP192Component::GetBatData()
-{
-    return Read8bit(0x75);
-}
-//---------coulombcounter_from_here---------
-//enable: void EnableCoulombcounter(void); 
-//disable: void DisableCOulombcounter(void);
-//stop: void StopCoulombcounter(void);
-//clear: void ClearCoulombcounter(void);
-//get charge data: uint32_t GetCoulombchargeData(void);
-//get discharge data: uint32_t GetCoulombdischargeData(void);
-//get coulomb val affter calculation: float GetCoulombData(void);
-//------------------------------------------
-void  AXP192Component::EnableCoulombcounter(void)
-{
-    Write1Byte( 0xB8 , 0x80 );
-}
-
-void  AXP192Component::DisableCoulombcounter(void)
-{
-    Write1Byte( 0xB8 , 0x00 );
-}
-
-void  AXP192Component::StopCoulombcounter(void)
-{
-    Write1Byte( 0xB8 , 0xC0 );
-}
-
-void  AXP192Component::ClearCoulombcounter(void)
-{
-    Write1Byte( 0xB8 , 0xA0 );
-}
-
-uint32_t AXP192Component::GetCoulombchargeData(void)
-{
-    return Read32bit(0xB0);
-}
-
-uint32_t AXP192Component::GetCoulombdischargeData(void)
-{
-    return Read32bit(0xB4);
-}
-
-float AXP192Component::GetCoulombData(void)
-{
-
-  uint32_t coin = 0;
-  uint32_t coout = 0;
-
-  coin = GetCoulombchargeData();
-  coout = GetCoulombdischargeData();
-
-  //c = 65536 * current_LSB * (coin - coout) / 3600 / ADC rate
-  //Adc rate can be read from 84H ,change this variable if you change the ADC reate
-  float ccc = 65536 * 0.5 * (coin - coout) / 3600.0 / 25.0;
-  return ccc;
-
-}
-//----------coulomb_end_at_here----------
-
-uint16_t AXP192Component::GetVbatData(void){
-
-    uint16_t vbat = 0;
-    uint8_t buf[2];
-    ReadBuff(0x78,2,buf);
-    vbat = ((buf[0] << 4) + buf[1]); // V
-    return vbat;
-}
-
-uint16_t AXP192Component::GetVinData(void)
-{
-    uint16_t vin = 0;
-    uint8_t buf[2];
-    ReadBuff(0x56,2,buf);
-    vin = ((buf[0] << 4) + buf[1]); // V
-    return vin;
-}
-
-uint16_t AXP192Component::GetIinData(void)
-{
-    uint16_t iin = 0;
-    uint8_t buf[2];
-    ReadBuff(0x58,2,buf);
-    iin = ((buf[0] << 4) + buf[1]);
-    return iin;
-}
-
-uint16_t AXP192Component::GetVusbinData(void)
-{
-    uint16_t vin = 0;
-    uint8_t buf[2];
-    ReadBuff(0x5a,2,buf);
-    vin = ((buf[0] << 4) + buf[1]); // V
-    return vin;
-}
-
-uint16_t AXP192Component::GetIusbinData(void)
-{
-    uint16_t iin = 0;
-    uint8_t buf[2];
-    ReadBuff(0x5C,2,buf);
-    iin = ((buf[0] << 4) + buf[1]);
-    return iin;
-}
-
-uint16_t AXP192Component::GetIchargeData(void)
-{
-    uint16_t icharge = 0;
-    uint8_t buf[2];
-    ReadBuff(0x7A,2,buf);
-    icharge = ( buf[0] << 5 ) + buf[1] ;
-    return icharge;
-}
-
-uint16_t AXP192Component::GetIdischargeData(void)
-{
-    uint16_t idischarge = 0;
-    uint8_t buf[2];
-    ReadBuff(0x7C,2,buf);
-    idischarge = ( buf[0] << 5 ) + buf[1] ;
-    return idischarge;
-}
-
-uint16_t AXP192Component::GetTempData(void)
-{
-    uint16_t temp = 0;
-    uint8_t buf[2];
-    ReadBuff(0x5e,2,buf);
-    temp = ((buf[0] << 4) + buf[1]);
-    return temp;
-}
-
-uint32_t AXP192Component::GetPowerbatData(void)
-{
-    uint32_t power = 0;
-    uint8_t buf[3];
-    ReadBuff(0x70,2,buf);
-    power = (buf[0] << 16) + (buf[1] << 8) + buf[2];
-    return power;
-}
-
-uint16_t AXP192Component::GetVapsData(void)
-{
-    uint16_t vaps = 0;
-    uint8_t buf[2];
-    ReadBuff(0x7e,2,buf);
-    vaps = ((buf[0] << 4) + buf[1]);
-    return vaps;
-}
-
-void AXP192Component::SetSleep(void)
-{
-    Write1Byte(0x31 , Read8bit(0x31) | ( 1 << 3)); // Power off voltag 3.0v
-    Write1Byte(0x90 , Read8bit(0x90) | 0x07); // GPIO1 floating
-    Write1Byte(0x82, 0x00); // Disable ADCs
-    Write1Byte(0x12, Read8bit(0x12) & 0xA1); // Disable all outputs but DCDC1
-}
-
-// -- sleep
-void AXP192Component::DeepSleep(uint64_t time_in_us)
-{ 
-    SetSleep();
-    esp_sleep_enable_ext0_wakeup((gpio_num_t)37, LOW);
-    if (time_in_us > 0)
-    {
-        esp_sleep_enable_timer_wakeup(time_in_us);
-    }
-    else
-    {
-        esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
-    }
-    (time_in_us == 0) ? esp_deep_sleep_start() : esp_deep_sleep(time_in_us);
-}
-
-void AXP192Component::LightSleep(uint64_t time_in_us)
-{
-    if (time_in_us > 0)
-    {
-        esp_sleep_enable_timer_wakeup(time_in_us);
-    }
-    else
-    {
-        esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
-    }
-    esp_light_sleep_start();
-}
-
-// 0 not press, 0x01 long press, 0x02 press
-uint8_t AXP192Component::GetBtnPress()
-{
-    uint8_t state = Read8bit(0x46);
-    if(state) 
-    {
-        Write1Byte( 0x46 , 0x03 );
-    }
-    return state;
-}
-
-uint8_t AXP192Component::GetWarningLevel(void)
-{
-    return Read8bit(0x47) & 0x01;
-}
-
-float AXP192Component::GetBatVoltage()
-{
-    float ADCLSB = 1.1 / 1000.0;
-    uint16_t ReData = Read12Bit( 0x78 );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetBatCurrent()
-{
-    float ADCLSB = 0.5;
-    uint16_t CurrentIn = Read13Bit( 0x7A );
-    uint16_t CurrentOut = Read13Bit( 0x7C );
-    return ( CurrentIn - CurrentOut ) * ADCLSB;
-}
-
-float AXP192Component::GetVinVoltage()
-{
-    float ADCLSB = 1.7 / 1000.0;
-    uint16_t ReData = Read12Bit( 0x56 );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetVinCurrent()
-{
-    float ADCLSB = 0.625;
-    uint16_t ReData = Read12Bit( 0x58 );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetVBusVoltage()
-{
-    float ADCLSB = 1.7 / 1000.0;
-    uint16_t ReData = Read12Bit( 0x5A );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetVBusCurrent()
-{
-    float ADCLSB = 0.375;
-    uint16_t ReData = Read12Bit( 0x5C );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetTempInAXP192()
-{
-    float ADCLSB = 0.1;
-    const float OFFSET_DEG_C = -144.7;
-    uint16_t ReData = Read12Bit( 0x5E );
-    return OFFSET_DEG_C + ReData * ADCLSB;
-}
-
-float AXP192Component::GetBatPower()
-{
-    float VoltageLSB = 1.1;
-    float CurrentLCS = 0.5;
-    uint32_t ReData = Read24bit( 0x70 );
-    return  VoltageLSB * CurrentLCS * ReData/ 1000.0;
-}
-
-float AXP192Component::GetBatChargeCurrent()
-{
-    float ADCLSB = 0.5;
-    uint16_t ReData = Read13Bit( 0x7A );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetAPSVoltage()
-{
-    float ADCLSB = 1.4  / 1000.0;
-    uint16_t ReData = Read12Bit( 0x7E );
-    return ReData * ADCLSB;
-}
-
-float AXP192Component::GetBatCoulombInput()
-{
-    uint32_t ReData = Read32bit( 0xB0 );
-    return ReData * 65536 * 0.5 / 3600 /25.0;
-}
-
-float AXP192Component::GetBatCoulombOut()
-{
-    uint32_t ReData = Read32bit( 0xB4 );
-    return ReData * 65536 * 0.5 / 3600 /25.0;
-}
-
-void AXP192Component::SetCoulombClear()
-{
-    Write1Byte(0xB8,0x20);
-}
-
-void AXP192Component::SetLDO2( bool State )
-{
-    uint8_t buf = Read8bit(0x12);
-    if( State == true )
-    {
-        buf = (1<<2) | buf;
-    }
-    else
-    {
-        buf = ~(1<<2) & buf;
-    }
-    Write1Byte( 0x12 , buf );
-}
-
-void AXP192Component::SetLDO3(bool State)
-{
-    uint8_t buf = Read8bit(0x12);
-    if( State == true )
-    {
-        buf = (1<<3) | buf;
-    }
-    else
-    {
-        buf = ~(1<<3) & buf;
-    }
-    Write1Byte( 0x12 , buf );
-}
-
-
-void AXP192Component::SetChargeCurrent(uint8_t current)
-{
-    uint8_t buf = Read8bit(0x33);
-    buf = (buf & 0xf0) | (current & 0x07);
-    Write1Byte(0x33, buf);
-}
-
-void AXP192Component::PowerOff()
-{
-    Write1Byte(0x32, Read8bit(0x32) | 0x80);
-}
-
-void AXP192Component::SetAdcState(bool state)
-{
-    Write1Byte(0x82, state ? 0xff : 0x00);
-}
-}
-}
-

custom_components/axp192_disable/axp192.h

@@ -1,116 +0,0 @@
-#ifndef __AXP192_H__
-#define __AXP192_H__
-
-#include "esphome/core/component.h"
-#include "esphome/core/helpers.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
-
-namespace esphome {
-namespace axp192 {
-
-#define SLEEP_MSEC(us) (((uint64_t)us) * 1000L)
-#define SLEEP_SEC(us)  (((uint64_t)us) * 1000000L)
-#define SLEEP_MIN(us)  (((uint64_t)us) * 60L * 1000000L)
-#define SLEEP_HR(us)   (((uint64_t)us) * 60L * 60L * 1000000L)
-
-#define CURRENT_100MA  (0b0000)
-#define CURRENT_190MA  (0b0001)
-#define CURRENT_280MA  (0b0010)
-#define CURRENT_360MA  (0b0011)
-#define CURRENT_450MA  (0b0100)
-#define CURRENT_550MA  (0b0101)
-#define CURRENT_630MA  (0b0110)
-#define CURRENT_700MA  (0b0111)
-
-class AXP192Component : public PollingComponent, public i2c::I2CDevice {
-public:
-  void set_batterylevel_sensor(sensor::Sensor *batterylevel_sensor) { batterylevel_sensor_ = batterylevel_sensor; }
-  void set_brightness(float brightness) { brightness_ = brightness; }
-
-  // ========== INTERNAL METHODS ==========
-  // (In most use cases you won't need these)
-  void setup() override;
-  void dump_config() override;
-  float get_setup_priority() const override;
-  void update() override;
-
-protected:
-    sensor::Sensor *batterylevel_sensor_;
-    float brightness_{1.0f};
-    float curr_brightness_{-1.0f};
-
-    /**
-     * LDO2: Display backlight
-     * LDO3: Display Control
-     * RTC: Don't set GPIO1 as LDO
-     * DCDC1: Main rail. When not set the controller shuts down.
-     * DCDC3: Use unknown
-     */
-    void  begin(bool disableLDO2 = false, bool disableLDO3 = false, bool disableRTC = false, bool disableDCDC1 = false, bool disableDCDC3 = false);
-    void  UpdateBrightness();
-    bool  GetBatState();
-    uint8_t  GetBatData();
-  
-    void  EnableCoulombcounter(void);
-    void  DisableCoulombcounter(void);
-    void  StopCoulombcounter(void);
-    void  ClearCoulombcounter(void);
-    uint32_t GetCoulombchargeData(void);
-    uint32_t GetCoulombdischargeData(void);
-    float GetCoulombData(void); 
-    
-    uint16_t GetVbatData(void) __attribute__((deprecated));
-    uint16_t GetIchargeData(void) __attribute__((deprecated));
-    uint16_t GetIdischargeData(void) __attribute__((deprecated));
-    uint16_t GetTempData(void) __attribute__((deprecated));
-    uint32_t GetPowerbatData(void) __attribute__((deprecated));
-    uint16_t GetVinData(void) __attribute__((deprecated));
-    uint16_t GetIinData(void) __attribute__((deprecated));
-    uint16_t GetVusbinData(void) __attribute__((deprecated));
-    uint16_t GetIusbinData(void) __attribute__((deprecated));
-    uint16_t GetVapsData(void) __attribute__((deprecated));
-    uint8_t GetBtnPress(void);
-
-      // -- sleep
-    void SetSleep(void);
-    void DeepSleep(uint64_t time_in_us = 0);
-    void LightSleep(uint64_t time_in_us = 0);
-
-    // void SetChargeVoltage( uint8_t );
-    void  SetChargeCurrent( uint8_t );
-    float GetBatVoltage();
-    float GetBatCurrent();
-    float GetVinVoltage();
-    float GetVinCurrent();
-    float GetVBusVoltage();
-    float GetVBusCurrent();
-    float GetTempInAXP192();
-    float GetBatPower();
-    float GetBatChargeCurrent();
-    float GetAPSVoltage();
-    float GetBatCoulombInput();
-    float GetBatCoulombOut();
-    uint8_t GetWarningLevel(void);	
-    void SetCoulombClear();
-    void SetLDO2( bool State );
-    void SetLDO3( bool State );
-    void SetAdcState(bool State);
-    
-    void PowerOff();
-
-    
-    void Write1Byte( uint8_t Addr ,  uint8_t Data );
-    uint8_t Read8bit( uint8_t Addr );
-    uint16_t Read12Bit( uint8_t Addr);
-    uint16_t Read13Bit( uint8_t Addr);
-    uint16_t Read16bit( uint8_t Addr );
-    uint32_t Read24bit( uint8_t Addr );
-    uint32_t Read32bit( uint8_t Addr );
-    void ReadBuff( uint8_t Addr , uint8_t Size , uint8_t *Buff );
-}; 
-
-}
-}
-
-#endif

custom_components/axp192_disable/sensor.py

@@ -1,34 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c, sensor
-from esphome.const import CONF_ID,\
-    CONF_BATTERY_LEVEL, CONF_BRIGHTNESS, UNIT_PERCENT, ICON_BATTERY
-
-DEPENDENCIES = ['i2c']
-
-axp192_ns = cg.esphome_ns.namespace('axp192')
-
-AXP192Component = axp192_ns.class_('AXP192Component', cg.PollingComponent, i2c.I2CDevice)
-
-CONFIG_SCHEMA = cv.Schema({
-    cv.GenerateID(): cv.declare_id(AXP192Component),
-    cv.Optional(CONF_BATTERY_LEVEL):
-        sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 1).extend({
-        }),
-    cv.Optional(CONF_BRIGHTNESS, default=1.0): cv.percentage,
-}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x77))
-
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield i2c.register_i2c_device(var, config)
-
-    if CONF_BATTERY_LEVEL in config:
-        conf = config[CONF_BATTERY_LEVEL]
-        sens = yield sensor.new_sensor(conf)
-        cg.add(var.set_batterylevel_sensor(sens))
-
-    if CONF_BRIGHTNESS in config:
-        conf = config[CONF_BRIGHTNESS]
-        cg.add(var.set_brightness(conf))

custom_components/heapmon/README.md

@@ -1,12 +0,0 @@
-# heap space monitor
-
-A sensor to show the available heap space.
-
-Example:
-```yaml
-sensor:
-  - platform: heapmon
-    id: heapspace
-    name: "Free Space"
-```
-

custom_components/heapmon/heapmon.cpp

@@ -1,17 +0,0 @@
-#include "heapmon.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace debug {
-
-static const char *TAG = "heapmon";
-
-void HeapMonitor::update() {
-  uint32_t free_heap = ESP.getFreeHeap();
-  ESP_LOGD(TAG, "Free Heap Size: %u bytes", free_heap);
-  this->publish_state(free_heap);
-}
-
-}  // namespace debug
-}  // namespace esphome
-

custom_components/heapmon/heapmon.h

@@ -1,17 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-
-namespace esphome {
-namespace debug {
-
-class HeapMonitor : public sensor::Sensor, public PollingComponent {
- public:
-  void update() override;
-  float get_setup_priority() const override { return setup_priority::LATE; };
-};
-
-}  // namespace debug
-}  // namespace esphome
-

custom_components/heapmon/sensor.py

@@ -1,18 +0,0 @@
-import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome.components import sensor
-from esphome.const import CONF_ID, ICON_GAUGE
-
-UNIT_BYTE = "B"
-
-debug_ns = cg.esphome_ns.namespace('debug')
-HeapMonitor = debug_ns.class_('HeapMonitor', cg.PollingComponent)
-CONFIG_SCHEMA = sensor.sensor_schema(UNIT_BYTE, ICON_GAUGE, 0).extend({
-    cv.GenerateID(): cv.declare_id(HeapMonitor),
-}).extend(cv.polling_component_schema('60s'))
-
-def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
-    yield sensor.register_sensor(var, config)
-

custom_components/ili9341_disable/display.py

@@ -1,61 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import display, spi
-from esphome.const import CONF_DC_PIN, \
-    CONF_ID, CONF_LAMBDA, CONF_MODEL, CONF_PAGES, CONF_RESET_PIN
-
-DEPENDENCIES = ['spi']
-
-CONF_LED_PIN = 'led_pin'
-
-ili9341_ns = cg.esphome_ns.namespace('ili9341')
-ili9341 = ili9341_ns.class_('ILI9341Display', cg.PollingComponent, spi.SPIDevice,
-                            display.DisplayBuffer)
-ILI9341M5Stack = ili9341_ns.class_('ILI9341M5Stack', ili9341)
-ILI9341TFT24 = ili9341_ns.class_('ILI9341TFT24', ili9341)
-
-ILI9341Model = ili9341_ns.enum('ILI9341Model')
-
-MODELS = {
-    'M5STACK': ILI9341Model.M5STACK,
-    'TFT_2.4': ILI9341Model.TFT_24,
-}
-
-ILI9341_MODEL = cv.enum(MODELS, upper=True, space="_")
-
-CONFIG_SCHEMA = cv.All(display.FULL_DISPLAY_SCHEMA.extend({
-    cv.GenerateID(): cv.declare_id(ili9341),
-    cv.Required(CONF_MODEL): ILI9341_MODEL,
-    cv.Required(CONF_DC_PIN): pins.gpio_output_pin_schema,
-    cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
-    cv.Optional(CONF_LED_PIN): pins.gpio_output_pin_schema,
-}).extend(cv.polling_component_schema('1s')).extend(spi.spi_device_schema()),
-                       cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA))
-
-
-def to_code(config):
-    if config[CONF_MODEL] == 'M5STACK':
-        lcd_type = ILI9341M5Stack
-    if config[CONF_MODEL] == 'TFT_2.4':
-        lcd_type = ILI9341TFT24
-    rhs = lcd_type.new()
-    var = cg.Pvariable(config[CONF_ID], rhs)
-
-    yield cg.register_component(var, config)
-    yield display.register_display(var, config)
-    yield spi.register_spi_device(var, config)
-    cg.add(var.set_model(config[CONF_MODEL]))
-    dc = yield cg.gpio_pin_expression(config[CONF_DC_PIN])
-    cg.add(var.set_dc_pin(dc))
-
-    if CONF_LAMBDA in config:
-        lambda_ = yield cg.process_lambda(config[CONF_LAMBDA], [(display.DisplayBufferRef, 'it')],
-                                          return_type=cg.void)
-        cg.add(var.set_writer(lambda_))
-    if CONF_RESET_PIN in config:
-        reset = yield cg.gpio_pin_expression(config[CONF_RESET_PIN])
-        cg.add(var.set_reset_pin(reset))
-    if CONF_LED_PIN in config:
-        led_pin = yield cg.gpio_pin_expression(config[CONF_LED_PIN])
-        cg.add(var.set_led_pin(led_pin))

custom_components/ili9341_disable/ili9341_defines.h

@@ -1,83 +0,0 @@
-#pragma once
-
-namespace esphome {
-namespace ili9341 {
-
-// Color definitions
-// clang-format off
-static const uint8_t MADCTL_MY    = 0x80;   ///< Bit 7 Bottom to top
-static const uint8_t MADCTL_MX    = 0x40;   ///< Bit 6 Right to left
-static const uint8_t MADCTL_MV    = 0x20;   ///< Bit 5 Reverse Mode
-static const uint8_t MADCTL_ML    = 0x10;   ///< Bit 4 LCD refresh Bottom to top
-static const uint8_t MADCTL_RGB   = 0x00;  ///< Bit 3 Red-Green-Blue pixel order
-static const uint8_t MADCTL_BGR   = 0x08;  ///< Bit 3 Blue-Green-Red pixel order
-static const uint8_t MADCTL_MH    = 0x04;   ///< Bit 2 LCD refresh right to left
-// clang-format on
-
-static const uint16_t ILI9341_TFTWIDTH = 320;   ///< ILI9341 max TFT width
-static const uint16_t ILI9341_TFTHEIGHT = 240;  ///< ILI9341 max TFT height
-
-// All ILI9341 specific commands some are used by init()
-static const uint8_t ILI9341_NOP = 0x00;
-static const uint8_t ILI9341_SWRESET = 0x01;
-static const uint8_t ILI9341_RDDID = 0x04;
-static const uint8_t ILI9341_RDDST = 0x09;
-
-static const uint8_t ILI9341_SLPIN = 0x10;
-static const uint8_t ILI9341_SLPOUT = 0x11;
-static const uint8_t ILI9341_PTLON = 0x12;
-static const uint8_t ILI9341_NORON = 0x13;
-
-static const uint8_t ILI9341_RDMODE = 0x0A;
-static const uint8_t ILI9341_RDMADCTL = 0x0B;
-static const uint8_t ILI9341_RDPIXFMT = 0x0C;
-static const uint8_t ILI9341_RDIMGFMT = 0x0A;
-static const uint8_t ILI9341_RDSELFDIAG = 0x0F;
-
-static const uint8_t ILI9341_INVOFF = 0x20;
-static const uint8_t ILI9341_INVON = 0x21;
-static const uint8_t ILI9341_GAMMASET = 0x26;
-static const uint8_t ILI9341_DISPOFF = 0x28;
-static const uint8_t ILI9341_DISPON = 0x29;
-
-static const uint8_t ILI9341_CASET = 0x2A;
-static const uint8_t ILI9341_PASET = 0x2B;
-static const uint8_t ILI9341_RAMWR = 0x2C;
-static const uint8_t ILI9341_RAMRD = 0x2E;
-
-static const uint8_t ILI9341_PTLAR = 0x30;
-static const uint8_t ILI9341_VSCRDEF = 0x33;
-static const uint8_t ILI9341_MADCTL = 0x36;
-static const uint8_t ILI9341_VSCRSADD = 0x37;
-static const uint8_t ILI9341_PIXFMT = 0x3A;
-
-static const uint8_t ILI9341_WRDISBV = 0x51;
-static const uint8_t ILI9341_RDDISBV = 0x52;
-static const uint8_t ILI9341_WRCTRLD = 0x53;
-
-static const uint8_t ILI9341_FRMCTR1 = 0xB1;
-static const uint8_t ILI9341_FRMCTR2 = 0xB2;
-static const uint8_t ILI9341_FRMCTR3 = 0xB3;
-static const uint8_t ILI9341_INVCTR = 0xB4;
-static const uint8_t ILI9341_DFUNCTR = 0xB6;
-
-static const uint8_t ILI9341_PWCTR1 = 0xC0;
-static const uint8_t ILI9341_PWCTR2 = 0xC1;
-static const uint8_t ILI9341_PWCTR3 = 0xC2;
-static const uint8_t ILI9341_PWCTR4 = 0xC3;
-static const uint8_t ILI9341_PWCTR5 = 0xC4;
-static const uint8_t ILI9341_VMCTR1 = 0xC5;
-static const uint8_t ILI9341_VMCTR2 = 0xC7;
-
-static const uint8_t ILI9341_RDID4 = 0xD3;
-static const uint8_t ILI9341_RDINDEX = 0xD9;
-static const uint8_t ILI9341_RDID1 = 0xDA;
-static const uint8_t ILI9341_RDID2 = 0xDB;
-static const uint8_t ILI9341_RDID3 = 0xDC;
-static const uint8_t ILI9341_RDIDX = 0xDD;  // TBC
-
-static const uint8_t ILI9341_GMCTRP1 = 0xE0;
-static const uint8_t ILI9341_GMCTRN1 = 0xE1;
-
-}  // namespace ili9341
-}  // namespace esphome

custom_components/ili9341_disable/ili9341_display.cpp

@@ -1,240 +0,0 @@
-#include "ili9341_display.h"
-#include "esphome/core/log.h"
-#include "esphome/core/application.h"
-#include "esphome/core/helpers.h"
-
-namespace esphome {
-namespace ili9341 {
-
-static const char *TAG = "ili9341";
-
-void ILI9341Display::setup_pins_() {
-  this->init_internal_(this->get_buffer_length_());
-  this->dc_pin_->setup();  // OUTPUT
-  this->dc_pin_->digital_write(false);
-  if (this->reset_pin_ != nullptr) {
-    this->reset_pin_->setup();  // OUTPUT
-    this->reset_pin_->digital_write(true);
-  }
-  if (this->led_pin_ != nullptr) {
-    this->led_pin_->setup();
-    this->led_pin_->digital_write(true);
-  }
-  this->spi_setup();
-
-  this->reset_();
-}
-
-void ILI9341Display::dump_config() {
-  LOG_DISPLAY("", "ili9341", this);
-  ESP_LOGCONFIG(TAG, "  Width: %d, Height: %d,  Rotation: %d", this->width_, this->height_, this->rotation_);
-  LOG_PIN("  Reset Pin: ", this->reset_pin_);
-  LOG_PIN("  DC Pin: ", this->dc_pin_);
-  LOG_PIN("  Busy Pin: ", this->busy_pin_);
-  LOG_PIN("  Backlight Pin: ", this->led_pin_);
-  LOG_UPDATE_INTERVAL(this);
-}
-
-float ILI9341Display::get_setup_priority() const { return setup_priority::PROCESSOR; }
-void ILI9341Display::command(uint8_t value) {
-  this->start_command_();
-  this->write_byte(value);
-  this->end_command_();
-}
-
-void ILI9341Display::reset_() {
-  if (this->reset_pin_ != nullptr) {
-    this->reset_pin_->digital_write(false);
-    delay(10);
-    this->reset_pin_->digital_write(true);
-    delay(10);
-  }
-}
-
-void ILI9341Display::data(uint8_t value) {
-  this->start_data_();
-  this->write_byte(value);
-  this->end_data_();
-}
-
-void ILI9341Display::send_command(uint8_t command_byte, const uint8_t *data_bytes, uint8_t num_data_bytes) {
-  this->command(command_byte);  // Send the command byte
-  this->start_data_();
-  this->write_array(data_bytes, num_data_bytes);
-  this->end_data_();
-}
-
-uint8_t ILI9341Display::read_command(uint8_t command_byte, uint8_t index) {
-  uint8_t data = 0x10 + index;
-  this->send_command(0xD9, &data, 1);  // Set Index Register
-  uint8_t result;
-  this->start_command_();
-  this->write_byte(command_byte);
-  this->start_data_();
-  do {
-    result = this->read_byte();
-  } while (index--);
-  this->end_data_();
-  return result;
-}
-
-void ILI9341Display::update() {
-  this->do_update_();
-  this->display_();
-}
-
-void ILI9341Display::display_() {
-  // we will only update the changed window to the display
-  int w = this->x_high_ - this->x_low_ + 1;
-  int h = this->y_high_ - this->y_low_ + 1;
-
-  set_addr_window_(this->x_low_, this->y_low_, w, h);
-  this->start_data_();
-  uint32_t start_pos = ((this->y_low_ * this->width_) + x_low_);
-  for (uint16_t row = 0; row < h; row++) {
-    for (uint16_t col = 0; col < w; col++) {
-      uint32_t pos = start_pos + (row * width_) + col;
-
-      uint16_t color = convert_to_16bit_color_(buffer_[pos]);
-      this->write_byte(color >> 8);
-      this->write_byte(color);
-    }
-  }
-  this->end_data_();
-
-  // invalidate watermarks
-  this->x_low_ = this->width_;
-  this->y_low_ = this->height_;
-  this->x_high_ = 0;
-  this->y_high_ = 0;
-}
-
-uint16_t ILI9341Display::convert_to_16bit_color_(uint8_t color_8bit) {
-  int r = color_8bit >> 5;
-  int g = (color_8bit >> 2) & 0x07;
-  int b = color_8bit & 0x03;
-  uint16_t color = (r * 0x04) << 11;
-  color |= (g * 0x09) << 5;
-  color |= (b * 0x0A);
-
-  return color;
-}
-
-uint8_t ILI9341Display::convert_to_8bit_color_(uint16_t color_16bit) {
-  // convert 16bit color to 8 bit buffer
-  uint8_t r = color_16bit >> 11;
-  uint8_t g = (color_16bit >> 5) & 0x3F;
-  uint8_t b = color_16bit & 0x1F;
-
-  return ((b / 0x0A) | ((g / 0x09) << 2) | ((r / 0x04) << 5));
-}
-
-void ILI9341Display::fill(Color color) {
-  auto color565 = color.to_rgb_565();
-  memset(this->buffer_, convert_to_8bit_color_(color565), this->get_buffer_length_());
-  this->x_low_ = 0;
-  this->y_low_ = 0;
-  this->x_high_ = this->get_width_internal() - 1;
-  this->y_high_ = this->get_height_internal() - 1;
-}
-
-void ILI9341Display::fill_internal_(Color color) {
-  this->set_addr_window_(0, 0, this->get_width_internal(), this->get_height_internal());
-  this->start_data_();
-
-  auto color565 = color.to_rgb_565();
-  for (uint32_t i = 0; i < (this->get_width_internal()) * (this->get_height_internal()); i++) {
-    this->write_byte(color565 >> 8);
-    this->write_byte(color565);
-    buffer_[i] = 0;
-  }
-  this->end_data_();
-}
-
-void HOT ILI9341Display::draw_absolute_pixel_internal(int x, int y, Color color) {
-  if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0)
-    return;
-
-  // low and high watermark may speed up drawing from buffer
-  this->x_low_ = (x < this->x_low_) ? x : this->x_low_;
-  this->y_low_ = (y < this->y_low_) ? y : this->y_low_;
-  this->x_high_ = (x > this->x_high_) ? x : this->x_high_;
-  this->y_high_ = (y > this->y_high_) ? y : this->y_high_;
-
-  uint32_t pos = (y * width_) + x;
-  auto color565 = color.to_rgb_565();
-  buffer_[pos] = convert_to_8bit_color_(color565);
-}
-
-// should return the total size: return this->get_width_internal() * this->get_height_internal() * 2 // 16bit color
-// values per bit is huge
-uint32_t ILI9341Display::get_buffer_length_() { return this->get_width_internal() * this->get_height_internal(); }
-
-void ILI9341Display::start_command_() {
-  this->dc_pin_->digital_write(false);
-  this->enable();
-}
-
-void ILI9341Display::end_command_() { this->disable(); }
-void ILI9341Display::start_data_() {
-  this->dc_pin_->digital_write(true);
-  this->enable();
-}
-void ILI9341Display::end_data_() { this->disable(); }
-
-void ILI9341Display::init_lcd_(const uint8_t *init_cmd) {
-  uint8_t cmd, x, num_args;
-  const uint8_t *addr = init_cmd;
-  while ((cmd = pgm_read_byte(addr++)) > 0) {
-    x = pgm_read_byte(addr++);
-    num_args = x & 0x7F;
-    send_command(cmd, addr, num_args);
-    addr += num_args;
-    if (x & 0x80)
-      delay(150);  // NOLINT
-  }
-}
-
-void ILI9341Display::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t w, uint16_t h) {
-  uint16_t x2 = (x1 + w - 1), y2 = (y1 + h - 1);
-  this->command(ILI9341_CASET);  // Column address set
-  this->start_data_();
-  this->write_byte(x1 >> 8);
-  this->write_byte(x1);
-  this->write_byte(x2 >> 8);
-  this->write_byte(x2);
-  this->end_data_();
-  this->command(ILI9341_PASET);  // Row address set
-  this->start_data_();
-  this->write_byte(y1 >> 8);
-  this->write_byte(y1);
-  this->write_byte(y2 >> 8);
-  this->write_byte(y2);
-  this->end_data_();
-  this->command(ILI9341_RAMWR);  // Write to RAM
-}
-
-void ILI9341Display::invert_display_(bool invert) { this->command(invert ? ILI9341_INVON : ILI9341_INVOFF); }
-
-int ILI9341Display::get_width_internal() { return this->width_; }
-int ILI9341Display::get_height_internal() { return this->height_; }
-
-//   M5Stack display
-void ILI9341M5Stack::initialize() {
-  this->init_lcd_(INITCMD_M5STACK);
-  this->width_ = 320;
-  this->height_ = 240;
-  this->invert_display_(true);
-  this->fill_internal_(COLOR_BLACK);
-}
-
-//   24_TFT display
-void ILI9341TFT24::initialize() {
-  this->init_lcd_(INITCMD_TFT);
-  this->width_ = 240;
-  this->height_ = 320;
-  this->fill_internal_(COLOR_BLACK);
-}
-
-}  // namespace ili9341
-}  // namespace esphome

custom_components/ili9341_disable/ili9341_display.h

@@ -1,92 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/spi/spi.h"
-#include "esphome/components/display/display_buffer.h"
-#include "ili9341_defines.h"
-#include "ili9341_init.h"
-
-namespace esphome {
-namespace ili9341 {
-
-enum ILI9341Model {
-  M5STACK = 0,
-  TFT_24,
-};
-
-class ILI9341Display : public PollingComponent,
-                       public display::DisplayBuffer,
-                       public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
-                                             spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_40MHZ> {
- public:
-  void set_dc_pin(GPIOPin *dc_pin) { dc_pin_ = dc_pin; }
-  float get_setup_priority() const override;
-  void set_reset_pin(GPIOPin *reset) { this->reset_pin_ = reset; }
-  void set_led_pin(GPIOPin *led) { this->led_pin_ = led; }
-  void set_model(ILI9341Model model) { this->model_ = model; }
-
-  void command(uint8_t value);
-  void data(uint8_t value);
-  void send_command(uint8_t command_byte, const uint8_t *data_bytes, uint8_t num_data_bytes);
-  uint8_t read_command(uint8_t command_byte, uint8_t index);
-  virtual void initialize() = 0;
-
-  void update() override;
-
-  void fill(Color color) override;
-
-  void dump_config() override;
-  void setup() override {
-    this->setup_pins_();
-    this->initialize();
-  }
-
- protected:
-  void draw_absolute_pixel_internal(int x, int y, Color color) override;
-  void setup_pins_();
-
-  void init_lcd_(const uint8_t *init_cmd);
-  void set_addr_window_(uint16_t x, uint16_t y, uint16_t w, uint16_t h);
-  void invert_display_(bool invert);
-  void reset_();
-  void fill_internal_(Color color);
-  void display_();
-  uint16_t convert_to_16bit_color_(uint8_t color_8bit);
-  uint8_t convert_to_8bit_color_(uint16_t color_16bit);
-
-  ILI9341Model model_;
-  int16_t width_{320};   ///< Display width as modified by current rotation
-  int16_t height_{240};  ///< Display height as modified by current rotation
-  uint16_t x_low_{0};
-  uint16_t y_low_{0};
-  uint16_t x_high_{0};
-  uint16_t y_high_{0};
-
-  uint32_t get_buffer_length_();
-  int get_width_internal() override;
-  int get_height_internal() override;
-
-  void start_command_();
-  void end_command_();
-  void start_data_();
-  void end_data_();
-
-  GPIOPin *reset_pin_{nullptr};
-  GPIOPin *led_pin_{nullptr};
-  GPIOPin *dc_pin_;
-  GPIOPin *busy_pin_{nullptr};
-};
-
-//-----------   M5Stack display --------------
-class ILI9341M5Stack : public ILI9341Display {
- public:
-  void initialize() override;
-};
-
-//-----------   ILI9341_24_TFT display --------------
-class ILI9341TFT24 : public ILI9341Display {
- public:
-  void initialize() override;
-};
-}  // namespace ili9341
-}  // namespace esphome

custom_components/ili9341_disable/ili9341_init.h

@@ -1,70 +0,0 @@
-#pragma once
-#include "esphome/core/helpers.h"
-
-namespace esphome {
-namespace ili9341 {
-
-// clang-format off
-static const uint8_t PROGMEM INITCMD_M5STACK[] = {
-  0xEF, 3, 0x03, 0x80, 0x02,
-  0xCF, 3, 0x00, 0xC1, 0x30,
-  0xED, 4, 0x64, 0x03, 0x12, 0x81,
-  0xE8, 3, 0x85, 0x00, 0x78,
-  0xCB, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
-  0xF7, 1, 0x20,
-  0xEA, 2, 0x00, 0x00,
-  ILI9341_PWCTR1  , 1, 0x23,             // Power control VRH[5:0]
-  ILI9341_PWCTR2  , 1, 0x10,             // Power control SAP[2:0];BT[3:0]
-  ILI9341_VMCTR1  , 2, 0x3e, 0x28,       // VCM control
-  ILI9341_VMCTR2  , 1, 0x86,             // VCM control2
-  ILI9341_MADCTL  , 1, MADCTL_BGR,       // Memory Access Control
-  ILI9341_VSCRSADD, 1, 0x00,             // Vertical scroll zero
-  ILI9341_PIXFMT  , 1, 0x55,
-  ILI9341_FRMCTR1 , 2, 0x00, 0x13,
-  ILI9341_DFUNCTR , 3, 0x08, 0x82, 0x27, // Display Function Control
-  0xF2, 1, 0x00,                         // 3Gamma Function Disable
-  ILI9341_GAMMASET , 1, 0x01,             // Gamma curve selected
-  ILI9341_GMCTRP1 , 15, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, // Set Gamma
-                        0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03, 
-                        0x0E, 0x09, 0x00,
-  ILI9341_GMCTRN1 , 15, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, // Set Gamma
-                        0x31, 0xC1, 0x48, 0x08, 0x0F, 0x0C, 
-                        0x31, 0x36, 0x0F,
-  ILI9341_SLPOUT  , 0x80,                // Exit Sleep
-  ILI9341_DISPON  , 0x80,                // Display on
-  0x00                                   // End of list
-};
-
-static const uint8_t PROGMEM INITCMD_TFT[] = {
-  0xEF, 3, 0x03, 0x80, 0x02,
-  0xCF, 3, 0x00, 0xC1, 0x30,
-  0xED, 4, 0x64, 0x03, 0x12, 0x81,
-  0xE8, 3, 0x85, 0x00, 0x78,
-  0xCB, 5, 0x39, 0x2C, 0x00, 0x34, 0x02,
-  0xF7, 1, 0x20,
-  0xEA, 2, 0x00, 0x00,
-  ILI9341_PWCTR1  , 1, 0x23,             // Power control VRH[5:0]
-  ILI9341_PWCTR2  , 1, 0x10,             // Power control SAP[2:0];BT[3:0]
-  ILI9341_VMCTR1  , 2, 0x3e, 0x28,       // VCM control
-  ILI9341_VMCTR2  , 1, 0x86,             // VCM control2
-  ILI9341_MADCTL  , 1, 0x48,             // Memory Access Control
-  ILI9341_VSCRSADD, 1, 0x00,             // Vertical scroll zero
-  ILI9341_PIXFMT  , 1, 0x55,
-  ILI9341_FRMCTR1 , 2, 0x00, 0x18,
-  ILI9341_DFUNCTR , 3, 0x08, 0x82, 0x27, // Display Function Control
-  0xF2, 1, 0x00,                         // 3Gamma Function Disable
-  ILI9341_GAMMASET , 1, 0x01,             // Gamma curve selected
-  ILI9341_GMCTRP1 , 15, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, // Set Gamma
-                        0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03, 
-                        0x0E, 0x09, 0x00,
-  ILI9341_GMCTRN1 , 15, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, // Set Gamma
-                        0x31, 0xC1, 0x48, 0x08, 0x0F, 0x0C, 
-                        0x31, 0x36, 0x0F,
-  ILI9341_SLPOUT  , 0x80,                // Exit Sleep
-  ILI9341_DISPON  , 0x80,                // Display on
-  0x00                                   // End of list
-};
-
-// clang-format on
-}  // namespace ili9341
-}  // namespace esphome