GpxStore#tree now reports a "cached" flag per file (reusing the same
mtime freshness check geojson() already does); the file tree shows a
small curly-braces icon next to any file whose conversion is already
on disk, so it's visible which files will toggle on instantly versus
which still need to parse.
A newer p4n2gpx run (Ruby rewrite, ~/test/mapping/p4n2gpx) started
emitting one plain GPX <link href> per park4night listing photo,
which this app parsed but never displayed. Gpx.waypoint_photos
collects them into a photos property; the waypoint popup renders them
as a row of thumbnails above the description, each opening full-size
in a new tab. Absent on older exports and plain GPS waypoints, so the
row just doesn't render for those.
GpxStore#save now calls geojson() itself right after writing the
file, so the (potentially tens-of-seconds, for a large POI export)
conversion cost is paid during the upload — covered by the frontend's
existing "Uploading…" status — instead of on whichever checkbox
toggle happens to be first, which otherwise reads as a silent hang
indistinguishable from broken. An unparseable file still saves fine;
the error just surfaces on first view same as before.
A several-thousand-waypoint park4night area export re-parses the
whole file with REXML on every toggle — ~2.4s for a 5k-waypoint/3.6MB
sample, so tens of seconds for a 50k-waypoint one, likely the actual
cause behind a "Could not load" report on a 41.5MB export. MapLibre
already clusters the waypoint layer client-side, so the bottleneck was
never rendering — cache the GeoJSON conversion alongside the source
file (invalidated by mtime) instead of a bigger bbox/tiling rework.
A park4night/OsmAnd POI export (e.g. a p4n2gpx area export) tags every
waypoint with a category and a per-category color/icon in its <extensions>
block, all of which was previously thrown away — every waypoint rendered as
the same plain red dot, unreadable once a file has a few thousand of them.
Maptool::Gpx now captures category/color/icon (waypoint_style), matched by
namespace URI rather than local element name: a p4n2gpx file carries both
<osmand:icon> and <locus:icon> side by side, and REXML strips prefixes from
Element#name, so both report as just "icon" — matching on that alone was
silently picking the (useless) Locus drawable path instead of the OsmAnd
category key. Regression test added for this.
On the map: waypoints are colored by category (falling back to the plain
track color for anything uncategorized), a small hand-drawn icon set
(public/js/icons.js's POI_ICONS, rasterized to SDF sprites at runtime) draws
a glyph on top for the categories it covers, the points source is clustered
so a dense export collapses into count bubbles instead of a solid blob, and
a legend in the side panel lists whichever categories are currently visible.
Splitting each file's GeoJSON into a lines source and a points source
(rather than one mixed source with a geometry-type filter per layer) was
needed for clustering, since MapLibre's cluster support only understands a
source made entirely of points.
GPX tracks were silently failing to render for large real-world files:
point_extensions used REXML's "extensions//*" XPath, and the // descendant
axis costs low-single-digit milliseconds per call regardless of subtree
size. Run once per point, that's negligible on small files but ~30s on a
real 8000-point track — long enough to hit a proxy timeout in production,
so the file just never appeared with no error. Replaced with plain
recursive child traversal (~40x faster on the same file, confirmed
29.9s -> 3.16s); test_parsing_many_points_with_extensions_stays_fast
guards against reintroducing it.
Also adds support for <rte> routes (not just <trk> tracks and <wpt>
waypoints), sharing the track/route conversion logic via a new
line_feature helper. Routes get their own "route" kind and a dashed
ROUTE_ICON in the file tree so the type is visible at a glance.
TrackStats.build_profile now also computes elapsed_secs per point
(relative to the first known timestamp), alongside the existing
cumulative distance. Point x-positions stay distance-based either
way — only the shared axis strip's 5 tick labels (and the tooltip)
switch between the two, so toggling is a cheap re-render rather than
rebuilding the charts. The toggle only appears when a track actually
has elapsed-time data to switch to.
Track properties gain activity_type (FIT: sport enum from the
session/sport message, Garmin's own table; GPX: <trk><type> passed
through as-is) alongside the existing distance/elevation/duration.
Clicking a track line now opens a bottom panel with a chart per
metric the track actually has (elevation always; speed/cadence/heart
rate only when present — FIT's record fields or GPX's device
extensions). TrackStats.build_profile computes cumulative distance
the same way for both formats so they're directly comparable. One
pointermove listener drives a synchronized crosshair across every
chart, a single tooltip listing all series, and a map marker at the
hovered point's position — hovering the chart shows where on the
track that moment was.
`bundle exec rake test` (minitest, a default gem but pinned in
Gemfile for reproducibility) now covers what ad-hoc scripts kept
re-verifying by hand during development: Gpx/Fit/TrackStats parsing,
GpxStore/LiveTrackStore file/TTL logic, LiveTrackClient's payload
parsing, and app.rb's routes end to end via Rack::MockRequest.
MAPTOOL_DATA_DIR (new, app.rb) lets the suite point GPX_STORE/
LIVETRACK_STORE at a throwaway directory instead of real data/ —
without it every run would leave uploaded test files behind. Each
lib file's old `if __FILE__ == $0` self-check is now redundant with
real tests covering the same ground, so removed rather than kept as
a second copy of the same assertions. Wired into ci.yml so it isn't
just a local convenience.
Maptool::TrackStats computes these once, shared by Gpx and Fit so
both track feature shapes carry the same properties regardless of
source format. Hovering a track line (not clicking — these describe
the whole line, not one point) shows them in a popup, same mechanism
GPX waypoints already use.
Maptool::Fit reads Garmin's binary FIT format directly rather than
adding a gem — the one Ruby option depends on activesupport, unmaintained
since 2022, for a single-purpose binary parser. Only "record" messages
are read (position + altitude; everything else is skipped by byte
length, never interpreted); field numbers and scale/offset are
Garmin's own (fit-python-sdk's profile.py), and the framing plus all
extracted values were checked byte-for-byte against 5 real device
files from python-fitparse's test suite before this shipped.
A .zip upload (Garmin's bulk/FIT export format) is expanded into its
.gpx/.fit entries via rubyzip — that one's an actual dependency, since
ZIP's own format isn't the kind of narrow, single-purpose parsing FIT
above is.
A session's own end timestamp is absent until the activity is
actually stopped, so its presence/absence is the status signal — no
new data needed, just reading what was already there. Shown as a
badge next to the session in the list and in its map hover popup.
Fetching a session's track now also grabs its summary (name, activity
type, distance, duration) from the same page and stores it — sessions
the panel has actually shown replace their raw UUID with that summary,
and are kept indefinitely regardless of age. A session nobody ever
opened (no summary) is more likely test/dead data than something worth
keeping, so it's dropped automatically after 48h.
Clicking a LiveTrack session now fetches and draws its track (line +
latest position). Garmin's own API 403s any plain server-side request
(Cloudflare bot protection), so LiveTrackClient fetches the session
page instead and pulls the track out of the server-rendered data
embedded in it. The webhook now captures the session's token too,
since the id alone isn't enough to fetch anything.
A Gmail-watching Apps Script (documented in docs/deployment.adoc) posts
the session ID from each LiveTrack email to a new webhook, which stores
it in data/livetrack.json; a new sidebar panel lists what's been
received.
Each tree entry now shows a small waypoint/track icon based on a
cheap substring check for <wpt>/<trk> (Maptool::Gpx.kinds) rather than
a full REXML parse, since re-parsing a several-thousand-waypoint file
on every tree fetch would make the panel noticeably slower to open.
Also fix a real drop-target bug: .gpx-tree had no flex:1, so a
short/empty tree left blank panel space below it that wasn't part of
the drag & drop target — dropping a file there silently did nothing.
Restructure the map controls from MapLibre corner buttons into a left
sidebar of icons with flyouts/panels (radar, GPX, GNSS), matching
OsmAnd's layout more closely:
- Base map and GPX selection are now full-height side panels docked
next to the sidebar (not small dropdown flyouts or a right-docked
panel), opening/closing exclusively via a small shared event bus
(panels.js) so only one is ever open at a time.
- The GPX panel's upload/new-folder controls are now icon buttons in
the header instead of an always-visible dropzone and form; dragging
a GPX file onto the tree, a specific folder, or straight onto the
map itself all upload it.
- New: Maptool::GpsdClient (lib/maptool/gpsd_client.rb) streams live
GNSS fixes from a local gpsd daemon over Server-Sent Events
(/api/gnss/stream) to a marker on the map (public/js/gnss.js) — one
background gpsd connection shared by every browser tab.
- The online map style (public/js/osmand-style.js) is now styled to
resemble OsmAnd's own rendering, applied to both the online and
offline (PMTiles) styles.
Also adds a GeolocateControl (browser geolocation) next to the zoom
controls.
Uploading is now drag & drop (or click to browse) instead of a form;
folders can be created any time, not just during upload; files can be
dragged onto a folder to move them, or dropped elsewhere in the tree
to move back to the top level; files and folders can be deleted. Both
drag sources (an OS file drag and dragging an existing tree entry)
land on the same drop targets, told apart by a custom drag payload
type versus the browser's own "Files" type.
Also sort folders before files in the tree (previously interleaved
alphabetically).
Upload GPX files into a folder hierarchy (traversal-safe path
resolution against the store root), browse them in a tree panel, and
toggle each one's waypoints/tracks on the map. Waypoints render as
clickable points showing name, description and time; bare URLs in the
description are turned into safe links. GPX layers survive switching
between the Online/Offline base map, same as the radar overlay.
Adds rexml as an explicit dependency — it moved to a bundled gem in
this Ruby version and isn't picked up by Bundler otherwise.
randy