Start playing with CANopen

Fix ethernet
Remove API and WIFI from vehicle beacons
2026-01-02 11:37:28 +01:00 · 2025-05-02 20:34:53 +02:00 · 2025-05-02 20:29:19 +02:00 · 2025-05-02 20:24:55 +02:00 · 2025-05-02 20:23:18 +02:00
33 changed files with 245 additions and 201 deletions
--- a/common/ethernet.yaml
+++ b/common/ethernet.yaml
@@ -3,6 +3,7 @@ ethernet:
  type: LAN8720
  mdc_pin: 23
  mdio_pin: 18
-  clk_mode: GPIO17_OUT
+  clk_pin: 17
+  clk_mode: CLK_OUT
  phy_addr: 0
  power_pin: 12
--- a/mcu-air-office-r.yaml
+++ b/mcu-air-office-r.yaml
@@ -15,11 +15,13 @@ esp32:
  # board: m5stamp-pico
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.12
+#    version: 5.3.1
+#    platform_version: 6.9.0

-external_components:
-  - source: components
+# external_components:
+#   - source: components

 packages:
  common: !include common/common.yaml
@@ -55,7 +57,6 @@ light:
    rgb_order: GRB
    pin: 27
    num_leds: 1
-    # rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF
  - platform: esp32_rmt_led_strip
@@ -64,7 +65,6 @@ light:
    rgb_order: GRB
    pin: 25
    num_leds: 7
-    # rmt_channel: 1
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
--- a/mcu-atoms3.yaml
+++ b/mcu-atoms3.yaml
@@ -27,8 +27,8 @@ esp32:
    # version: dev
    # version: 5.1.2
    # platform_version: 6.6.0
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.3
+    platform_version: 53.03.12
    # type: arduino

 pcf8574:
--- a/mcu-bedroom-lamp-left.yaml
+++ b/mcu-bedroom-lamp-left.yaml
@@ -14,8 +14,8 @@ esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
--- a/mcu-bedroom-lamp-right.yaml
+++ b/mcu-bedroom-lamp-right.yaml
@@ -14,8 +14,8 @@ esp32:
  board: esp32doit-devkit-v1
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11
    sdkconfig_options:
      CONFIG_FREERTOS_UNICORE: y
    advanced:
--- a/mcu-c6-test-1.yaml
+++ b/mcu-c6-test-1.yaml
@@ -40,8 +40,8 @@ esp32:
  flash_size: 16MB
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 logger:
  hardware_uart: USB_SERIAL_JTAG
--- a/mcu-c6-test-2.yaml
+++ b/mcu-c6-test-2.yaml
@@ -40,8 +40,8 @@ esp32:
  flash_size: 16MB
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 logger:
  hardware_uart: USB_SERIAL_JTAG
--- a/mcu-can-node-1.yaml
+++ b/mcu-can-node-1.yaml
@@ -13,12 +13,14 @@ esp32:
  board: esp32dev
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    # version: 5.3.1
+    # platform_version: 6.9.0

 external_components:
  - source: github://mrk-its/esphome-canopen@dev
    refresh: 1h
+  - source: github://mrk-its/esphome-canbus-udp-multicast@dev
+    refresh: 1h

 packages:
  common: !include common/common.yaml
@@ -28,65 +30,94 @@ canbus:
    id: can_bus
    rx_pin: 22
    tx_pin: 23
-    can_id: 0
-    bit_rate: 125kbps
+    can_id: 1
+    bit_rate: 500kbps

 canopen:
-  id: can_gate
+  id: can_open
  canbus_id: can_bus
  node_id: 1
  entities:
-    - id: boot
-      index: 1
-      tpdo: 0
-    - id: blue_led
-      index: 2
-      tpdo: 0
-    - id: uptime_sensor
-      index: 3
-      tpdo: 0
-    - id: cover1
-      index: 4
-      tpdo: 1
-    # - id: cover2
-    #   index: 5
-    #   tpdo: 1
+    - index: 1
+      id: light1_state
+      rpdo:
+        - node_id: 2
+          tpdo: 0
+          offset: 0
+          cmd: 0

-sensor:
-  - platform: uptime
-    id: uptime_sensor
-    name: "${name} Uptime"
-    update_interval: 5sec
-    internal: true
+    - index: 2
+      id: light1_brightness
+      size: 1
+      min_value: 0.0
+      max_value: 1.0
+      rpdo:
+        - node_id: 2
+          tpdo: 0
+          offset: 1
+          cmd: 0
+
+    - index: 3
+      id: light2_state
+      rpdo:
+        - node_id: 2
+          tpdo: 0
+          offset: 3
+          cmd: 0
+
+    - index: 4
+      id: light2_brightness
+      size: 1
+      min_value: 0.0
+      max_value: 1.0
+      rpdo:
+        - node_id: 2
+          tpdo: 0
+          offset: 4
+          cmd: 0

 binary_sensor:
+  - platform: template
+    id: light1_state
+    name: "Test Light 1 State"
+  - platform: template
+    id: light2_state
+    name: "Test Light 2 State"
+
+  - platform: template
+    id: light1_state_cmd
+
  - platform: gpio
-    name: "${name} Boot"
-    id: boot
-    internal: true
+    name: "Boot Button"
+    id: boot_button
    pin:
      number: 0
      inverted: true
+      mode:
+        input: true
+        pullup: true
+    on_press:
+      then:
+        - lambda: |-
+            bool state = id(light1_state).state || id(light2_state).state;
+
+            // send command to entity #1 (light) on node #2
+            id(can_open).send_entity_cmd(2, 1, !state);
+
+            // send command to entity #2 (light2) on node #2
+            id(can_open).send_entity_cmd(2, 2, !state);
+
+sensor:
+  - platform: template
+    id: light1_brightness
+    name: "Test Light 1 Brightness"
+  - platform: template
+    id: light2_brightness
+    name: "Test Light 2 Brightness"

 switch:
  - platform: gpio
-    name: "${name} Led"
+    name: "Led"
    id: blue_led
    internal: true
    pin: 2
-
-cover:
-  - platform: time_based
-    name: "${name} Cover"
-    id: cover1
-    internal: true
-    device_class: shutter
-    has_built_in_endstop: true
-    open_action:
-      - logger.log: open_action
-    open_duration: 10s
-    close_action:
-      - logger.log: close_action
-    close_duration: 10s
-    stop_action:
-      - logger.log: stop_action
--- a/mcu-can-node-2.yaml
+++ b/mcu-can-node-2.yaml
@@ -13,12 +13,14 @@ esp32:
  board: esp32dev
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    # version: 5.3.2
+    # platform_version: 53.03.11

 external_components:
  - source: github://mrk-its/esphome-canopen@dev
    refresh: 1h
+  - source: github://mrk-its/esphome-canbus-udp-multicast@dev
+    refresh: 1h

 packages:
  common: !include common/common.yaml
@@ -28,65 +30,77 @@ canbus:
    id: can_bus
    rx_pin: 22
    tx_pin: 23
-    can_id: 0
-    bit_rate: 125kbps
+    can_id: 2
+    bit_rate: 500kbps

 canopen:
-  id: can_gate
+  id: can_open
  canbus_id: can_bus
  node_id: 2
  entities:
-    - id: boot
-      index: 1
+    - index: 1
+      id: light1
      tpdo: 0
-    - id: blue_led
-      index: 2
+
+    - index: 2
+      id: light2
      tpdo: 0
-    - id: uptime_sensor
-      index: 3
+
+    - index: 3
+      id: light3
      tpdo: 0
-    - id: cover1
-      index: 4
-      tpdo: 1
-    # - id: cover2
-    #   index: 5
-    #   tpdo: 1

-sensor:
-  - platform: uptime
-    id: uptime_sensor
-    name: "${name} Uptime"
-    update_interval: 5sec
-    internal: true
+output:
+  - platform: template
+    id: cw_output1
+    type: float
+    write_action:
+      - logger.log:
+          format: "output1: %f"
+          args: ['state']

-binary_sensor:
-  - platform: gpio
-    name: "${name} Boot"
-    id: boot
-    internal: true
-    pin:
-      number: 0
-      inverted: true
+  - platform: template
+    id: ww_output1
+    type: float
+    write_action:
+      - logger.log:
+          format: "output2: %f"
+          args: ['state']

-switch:
-  - platform: gpio
-    name: "${name} Led"
-    id: blue_led
-    internal: true
-    pin: 2
+  - platform: template
+    id: output2
+    type: float
+    write_action:
+      - logger.log:
+          format: "output1: %f"
+          args: ['state']

-cover:
-  - platform: time_based
-    name: "${name} Cover"
-    id: cover1
-    internal: true
-    device_class: shutter
-    has_built_in_endstop: true
-    open_action:
-      - logger.log: open_action
-    open_duration: 10s
-    close_action:
-      - logger.log: close_action
-    close_duration: 10s
-    stop_action:
-      - logger.log: stop_action
+  - platform: template
+    id: output3
+    type: float
+    write_action:
+      - logger.log:
+          format: "output1: %f"
+          args: ['state']
+
+light:
+  - platform: cwww
+    id: light1
+    name: "${name} Light 1"
+    cold_white: cw_output1
+    warm_white: ww_output1
+    cold_white_color_temperature: 6536 K
+    warm_white_color_temperature: 2000 K
+    constant_brightness: false
+    default_transition_length: 0s
+
+  - platform: monochromatic
+    id: light2
+    name: "${name} Light 2"
+    output: output2
+    default_transition_length: 0s
+
+  - platform: binary
+    id: light3
+    name: "${name} Light 3"
+    output: output3
--- a/mcu-cec-bedroom.yaml
+++ b/mcu-cec-bedroom.yaml
@@ -14,8 +14,8 @@ esp32:
  framework:
    # type: arduino
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  # - source: github://pr#3017
--- a/mcu-clock-1.yaml
+++ b/mcu-clock-1.yaml
@@ -16,8 +16,8 @@ esp32:
  variant: esp32c3
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.3
+    platform_version: 53.03.12

 packages:
  common: !include common/common.yaml
--- a/mcu-desk-lamp.yaml
+++ b/mcu-desk-lamp.yaml
@@ -13,8 +13,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 # external_components:
 #   - source: github://pr#7958
--- a/mcu-dimmer.yaml
+++ b/mcu-dimmer.yaml
@@ -33,8 +33,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.12

 external_components:
  - source: github://pr#7072
--- a/mcu-echo.yaml
+++ b/mcu-echo.yaml
@@ -15,8 +15,8 @@ esp32:
  framework:
    # type: arduino
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  - source: components
--- a/mcu-eworkbench.yaml
+++ b/mcu-eworkbench.yaml
@@ -14,8 +14,8 @@ esp32:
  variant: esp32c3
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
--- a/mcu-fireplace.yaml
+++ b/mcu-fireplace.yaml
@@ -13,8 +13,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  - source: github://mknjc/esphome@ds248x
--- a/mcu-gate.yaml
+++ b/mcu-gate.yaml
@@ -13,8 +13,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  - source: components
--- a/mcu-gateway.yaml
+++ b/mcu-gateway.yaml
@@ -10,13 +10,13 @@ esphome:
 esp32:
  board: esp32doit-devkit-v1
  framework:
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.2
+    platform_version: 53.03.11
    type: esp-idf

-# external_components:
-  # - source: github://pr#4062
-  #   components: ethernet
+external_components:
+  - source: github://pr#8457
+    components: ethernet
  # - source: github://pr#4080
  #   components: [lcd_pcf8574, lcd_base]
  # - source: github://pr#3564
--- a/mcu-heating.yaml
+++ b/mcu-heating.yaml
@@ -14,8 +14,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  - source: github://mknjc/esphome@ds248x
--- a/mcu-kitchen.yaml
+++ b/mcu-kitchen.yaml
@@ -31,8 +31,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
--- a/mcu-lvgl-eworkbench.yaml
+++ b/mcu-lvgl-eworkbench.yaml
@@ -20,8 +20,8 @@ esp32:
  flash_size: 16MB
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: y
      CONFIG_ESP32S3_DATA_CACHE_64KB: y
@@ -46,7 +46,7 @@ i2c:

 psram:
  mode: octal
-  speed: 120MHz
+  speed: 40MHz
  
 spi:
  id: display_qspi
--- a/mcu-lvgl.yaml
+++ b/mcu-lvgl.yaml
@@ -18,8 +18,8 @@ esp32:
  flash_size: 16MB
  framework:
    type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.5.0
+    version: 5.3.2
+    platform_version: 53.03.11
    # Required to achieve sufficient PSRAM bandwidth
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: y
@@ -301,10 +301,12 @@ image:
    # mdi:battery-arrow-down-outline
    id: solar_power_icon
    resize: 50x50
+    type: BINARY

  - file: mdi:battery-arrow-down-outline
    id: home_battery_icon
    resize: 30x30
+    type: BINARY

 lvgl:
  log_level: INFO
@@ -374,8 +376,8 @@ lvgl:
                      color: 0xFFFFFF
                      r_mod: 12 #sets line length by this much difference from the scale default radius
                      value: 50
-                  - img:
-                      id: power_meter_input_img
+                  # - image:
+                  #     id: power_meter_input_img
                  - arc:
                      color: 0xFF3000
                      r_mod: 10 #radius difference from the scale default radius
@@ -439,12 +441,12 @@ lvgl:
              #bg_color: 0xFFFFFF
              #y: -35
              #x: -60
-          - img:
+          - image:
              src: solar_power_icon
              id: img_solar_power
              align: center
-              img_recolor: 0xFFFF00
-              img_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
+              image_recolor: 0xFFFF00
+              image_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
              #bg_color: 0xFFFFFF
              y: 50
              #x: -60
@@ -482,8 +484,8 @@ lvgl:
                      color: 0xFFFFFF
                      r_mod: 12 #sets line length by this much difference from the scale default radius
                      value: 50
-                  - img:
-                      id: power_meter_input_img2
+                  # - image:
+                  #     id: power_meter_input_img2
                  - arc:
                      color: 0xFF3000
                      r_mod: 10 #radius difference from the scale default radius
@@ -547,12 +549,12 @@ lvgl:
              #bg_color: 0xFFFFFF
              #y: -35
              #x: -60
-          - img:
+          - image:
              src: solar_power_icon
              id: img_solar_power2
              align: center
-              img_recolor: 0xFFFF00
-              img_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
+              image_recolor: 0xFFFF00
+              image_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
              #bg_color: 0xFFFFFF
              y: 50
              #x: -60
@@ -590,8 +592,8 @@ lvgl:
                      color: 0xFFFFFF
                      r_mod: 12 #sets line length by this much difference from the scale default radius
                      value: 50
-                  - img:
-                      id: power_meter_input_img3
+                  # - image:
+                  #     id: power_meter_input_img3
                  - arc:
                      color: 0xFF3000
                      r_mod: 10 #radius difference from the scale default radius
@@ -655,12 +657,12 @@ lvgl:
              #bg_color: 0xFFFFFF
              #y: -35
              #x: -60
-          - img:
+          - image:
              src: solar_power_icon
              id: img_solar_power3
              align: center
-              img_recolor: 0xFFFF00
-              img_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
+              image_recolor: 0xFFFF00
+              image_recolor_opa: 100% #opacity defaults to 0% = must set this for recolor to take effect
              #bg_color: 0xFFFFFF
              y: 50
              #x: -60
--- a/mcu-mains-power.yaml
+++ b/mcu-mains-power.yaml
@@ -14,8 +14,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11
  
 packages:
  common: !include common/common.yaml
--- a/mcu-nspanel-dev.yaml
+++ b/mcu-nspanel-dev.yaml
@@ -34,8 +34,8 @@ esp32:
  board: nodemcu-32s
  framework:
    type: esp-idf
-    # version: 5.1.2
-    # platform_version: 6.6.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  # - source:
--- a/mcu-office-r.yaml
+++ b/mcu-office-r.yaml
@@ -17,8 +17,8 @@ esp32:
  variant: esp32c3
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
--- a/mcu-shed.yaml
+++ b/mcu-shed.yaml
@@ -13,8 +13,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
--- a/mcu-tft.yaml
+++ b/mcu-tft.yaml
@@ -17,8 +17,8 @@ esp32:
  variant: ESP32C3
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
--- a/mcu-tracker.yaml
+++ b/mcu-tracker.yaml
@@ -88,8 +88,8 @@ esp32:
  #   platform_version: 6.5.0
  framework:
    type: esp-idf
-    version: 5.1.2
-    platform_version: 6.5.0
+    version: 5.3.2
+    platform_version: 53.03.11

 ## TESTING

@@ -117,13 +117,13 @@ i2c:

 modem:
  id: atmodem
-  ready: modem_ready
+  # ready: modem_ready
  rx_pin: 26
  tx_pin: 27
  model: SIM7600
  apn: o2internet
-  username: ""
-  password: ""
+  # username: ""
+  # password: ""
  pin_code: ""
  init_at:
    - AT+CGNSSMODE=15,1 # GNSS all navigation systems
--- a/mcu-vehicle-honda-pcx125.yaml
+++ b/mcu-vehicle-honda-pcx125.yaml
@@ -37,11 +37,11 @@ esp32:
  framework:
    type: esp-idf

-api:
-  reboot_timeout: 0s
+# api:
+#   reboot_timeout: 0s

-wifi:
-  reboot_timeout: 0s
+# wifi:
+#   reboot_timeout: 0s

 external_components:
  - source: components
@@ -80,7 +80,6 @@ light:
    rgb_order: GRB
    pin: 27
    num_leds: 1
-    rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
--- a/mcu-vehicle-suzuki-dl650.yaml
+++ b/mcu-vehicle-suzuki-dl650.yaml
@@ -37,17 +37,17 @@ esp32:
  framework:
    type: esp-idf

-api:
-  reboot_timeout: 0s
+# api:
+#   reboot_timeout: 0s

-wifi:
-  reboot_timeout: 0s
+# wifi:
+#   reboot_timeout: 0s

 external_components:
  - source: components

 packages:
-   common: !include common/logger.yaml
+  common: !include common/logger.yaml
 #   common: !include common/common.yaml
  
 # debug:
@@ -80,7 +80,6 @@ light:
    rgb_order: GRB
    pin: 27
    num_leds: 1
-    rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
--- a/mcu-vehicle-toyota-auris-ts.yaml
+++ b/mcu-vehicle-toyota-auris-ts.yaml
@@ -36,24 +36,24 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 external_components:
  - source: components

 packages:
-  wifi: !include common/wifi.yaml
+  # wifi: !include common/wifi.yaml
  logger: !include common/logger.yaml
  # api: !include common/api.yaml
-  ota: !include common/ota.yaml
+  # ota: !include common/ota.yaml
 #   common: !include common/common.yaml

 # api:
 #   reboot_timeout: 0s

-wifi:
-  reboot_timeout: 0s
+# wifi:
+#   reboot_timeout: 0s

 # debug:

@@ -85,7 +85,6 @@ light:
    rgb_order: GRB
    pin: 27
    num_leds: 1
-    rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
--- a/mcu-vehicle-toyota-yaris-cross.yaml
+++ b/mcu-vehicle-toyota-yaris-cross.yaml
@@ -37,18 +37,18 @@ esp32:
  framework:
    type: esp-idf

-api:
-  reboot_timeout: 0s
+# api:
+#   reboot_timeout: 0s

-wifi:
-  reboot_timeout: 0s
+# wifi:
+#   reboot_timeout: 0s

 external_components:
  - source: components

 packages:
  common: !include common/logger.yaml
-  wifi: !include common/wifi.yaml
+  # wifi: !include common/wifi.yaml
  # common: !include common/common.yaml
  
 # debug:
@@ -81,7 +81,6 @@ light:
    rgb_order: GRB
    pin: 27
    num_leds: 1
-    rmt_channel: 0
    chipset: ws2812
    restore_mode: ALWAYS_OFF
    effects:
--- a/mcu-well.yaml
+++ b/mcu-well.yaml
@@ -26,8 +26,8 @@ esp32:
  board: m5stack-atom
  framework:
    type: esp-idf
-    version: 5.3.1
-    platform_version: 6.9.0
+    version: 5.3.2
+    platform_version: 53.03.11

 packages:
  common: !include common/common.yaml
Author	SHA1	Message	Date
Roman Priesol	f552ea0f97	Start playing with CANopen	2025-05-02 20:34:53 +02:00
Roman Priesol	e0b76fb95f	Fix ethernet	2025-05-02 20:29:19 +02:00
Roman Priesol	f8ef9d261d	Remove API and WIFI from vehicle beacons	2025-05-02 20:24:55 +02:00
Roman Priesol	f86cb569b0	Switch to pioarduino	2025-05-02 20:23:18 +02:00