Move the homeassistant time platform (id ha_time) into all common
packages. Devices with custom triggers now use '!extend ha_time';
plain duplicate time blocks are removed. mcu-lvgl's unused time_comp
is unified to ha_time.
- Winamp style spectrum analyzer instead of the face while music plays,
using audio_spectrum from randybb/esphome-components
- head touch: tap starts the assistant, stroking shows an in-love face;
SI12T sensitivity raised so the pads actually trigger
- battery (AXP2101) and wifi indicators, ear icon while listening
Voice assistant satellite with animated face on the CoreS3 display:
- power rails, IO expander resets and servo power as in the M5 BSP
- mic and speaker share one I2S bus, so the mic is released before playback
- AW88298 volume limited to the audible range (0.5-1.0)
- partial display redraws, status screen until Home Assistant connects
- battery and wifi indicators, listening icon
- camera converted to JPEG on demand, no periodic frames
Switch all NSPanels from the MQTT + AppDaemon based
esphome-nspanel-lovelace-ui to the native component
(randybb/esphome-nspanel-lovelace-native, ref: devices).
Cards and screensaver are now configured directly in ESPHome,
removing the dependency on MQTT and AppDaemon.
qspi_dbi is deprecated in favor of mipi_spi. Also fixes
mcu-lvgl-trainer's LVGL rotation (must be set on the lvgl component,
not the display, when LVGL is in use) and its deprecated
publish_initial_state -> trigger_on_initial_state. brightness is
dropped since mipi_spi only supports it for AMOLED panels and both
devices already control backlight separately.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the esp32_rmt_led_strip platform's rgb_order option to
channel_colors; update the remaining devices using it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The i2s_audio media_player platform was removed; rebuild the audio
pipeline like mcu-echo.yaml with an i2s_audio speaker feeding a
mixer, so media playback, TTS announcements, and rtttl beeps all
share the one physical DAC output without conflicting. Also uses
format: NONE instead of the deprecated codec_support_enabled.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The single on_multi_click FSM mixed an unbounded "at least 1500ms"
pattern with two bounded blink patterns, which made Open detection
unreliable. Split into two binary_sensor entries sharing the same
pin: a filter-based one for steady Open/Closed, and a dedicated
on_multi_click for the Opening/Closing blink patterns.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
register_count is derived from value_type now; drop the now-redundant
register_count: 1 on the temp/humidity sensors, and replace the
Solar Pressure sensor's register_count: 2 (its device always returns
2 registers per read) with a hidden padding sensor on the next
register using reuse_previous_range: true, per the new
modbus_controller range-grouping mechanism.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ili9xxx is being phased out in favor of the unified mipi_spi driver;
model TFT 2.4 maps to the ILI9341 chip it was already using.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds a UART-based Modbus link plus scripts to toggle channel 1 on the
n4dig08 relay module, and calls relay_module.setup() before each
irrigation switch action.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Move rx/tx off the shared gdo0 pin (21) onto dedicated pins, drop the
now-unneeded allow_other_uses/gdo0_pin workarounds, and align tx/rx
frequency to 433.92MHz.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Reflects what the device actually controls; renames the entity/id
(blower_auto -> aerator_auto) and display names accordingly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the esp32_rmt_led_strip platform's rgb_order option to
channel_colors; update all devices using it.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
ESPHome renamed the api component's services/service keys to
actions/action; update all devices using the old names.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
It's generated/local state from ESPHome Device Builder that changes
constantly and doesn't belong in version control.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Extract shared M5ATOM vehicle code (esp32, on_loop, LED effects) into
common/vehicle_base.yaml, reducing each vehicle file from ~136 to 20
lines. Remove dead commented-out code from on_loop lambda.
Gate: fix on_multi_click and select indentation, change
esp32_ble_tracker id from ${name} to ${device} (lowercase),
remove unused commented-out gate_flash GPIO sensor.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Bulk cleanup: remove trailing whitespace and ensure files end with a
newline. Structural issues (indentation, bracket spacing) left for
per-file fixes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix UART list indentation (yamllint error)
- Remove trailing spaces in display lambda
- Add missing newline at end of file
- Add ON/OFF to yamllint truthy allowed values
- Fix invalid comments rule option in .yamllint.yml
- Lint only changed files in CI (avoids blocking PRs with pre-existing issues)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- yamllint on all YAML files with ESPHome-friendly rules
(allows True/False, long lines for lambdas, no forced document-start)
- ESPHome config validation on changed mcu-*.yaml files per push/PR
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Remove redundant interval block overriding status_led behavior
- Add UART id and reference it explicitly in cse7766
- Replace manual power factor template with native cse7766 power_factor sensor
- Remove redundant switch_led control from bi-stable relay actions
- Fix stray quote in energy sensor name (dishwasher)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
randy
